Sensor Signal Conditioner IC Evaluation Kit
The ZSSC3240KIT Evaluation Kit provides the hardware needed for the configuration, calibration, and evaluation of the ZSSC3240 Sensor Signal Conditioner (SSC) IC. The...
概览
简介
The ZSSC3240 is a sensor signal conditioning IC (SSC) for highly accurate amplification, digitization, and sensor-specific correction of resistive sensor signals. The ZSSC3240 is suitable for bridge and half-bridge sensors, as well as external voltage-source element and single-element sensors (e.g., Pt100 and external temperature sensor diodes) powered by an on-chip current source. Digital compensation of the sensor offset, sensitivity, temperature drift, and non-linearity is accomplished via a 26-bit math core running a correction algorithm with calibration coefficients stored in a non-volatile, reprogrammable memory. The programmable, integrated sensor front-end allows optimally applying various sensors for a broad range of applications. The ZSSC3240 provides measurement value readouts and programming capabilities via an I²C, SPI, or one-wire interface (OWI). Three different operation modes allow optimal development of digital, digital-analog, and analog-output smart sensor modules including wake-up on request, continuous-on/fast‑response, and automatic/cyclic sensor measurement operations. Absolute and ratiometric voltage, current-loop, or interrupt analog outputs are supported by the ZSSC3240. The analog output options and digital interface options (for calibration and/or a digital application interface) can be combined.
特性
- Digital communication and calibration interfaces:
- SPI up to 10MHz
- I²C (Standard, Fast, and High-Speed mode)
- One-wire-interface (OWI), up to 100kBit/s
- Accommodates nearly all resistive bridge sensor types (signal spans from 1mV/V up to 500mV/V)
- Supports different sensor element configurations:
- Resistive bridge or half-bridge
- Resistive divider string
- Voltage source
- On-chip temperature sensor
- External temperature sensing supported, e.g. sensor-bridge as temperature detector, external diode, etc.
- Support for Pt100
- Programmable 16-bit digital-to-analog-converter and output:
- (0V to 1V) or (0V to 5V) absolute voltage output
- VDD-ratiometric voltage output
- 4mA to 20mA current-loop output supported
- 0V to 10V absolute-voltage output supported
- On-chip voltage regulators for sensor supply, and IC operation
- Support for VDD regulation by external JFET
- 24-bit analog-to-digital converter and 26 bits digital-signal-conditioning mathcore
- Reprogrammable, nonvolatile memory (NVM)
- Programmable measurement scheduler for continuous sensing applications, with an optimized balance of
- Energy consumption
- Output update rate
- Sensor-signal-conditioning accuracy
- Self-diagnostic coverage and system safety
- On-chip diagnostics:
- Sensor connection
- Broken-chip-check/chipping-check
- Memory integrity
产品对比
应用
文档
= 相关文档
请登录后开启订阅
|
|
|
|
|---|---|---|
| 类型 | 文档标题 | 日期 |
| 数据手册 | PDF 1.39 MB | |
| 概览 | PDF 2.92 MB 日文 | |
| 技术摘要 | PDF 198 KB | |
| 应用文档 | PDF 9.38 MB 日文 | |
| 手册 - 硬件 | PDF 2.56 MB | |
| 应用文档 | PDF 986 KB | |
| 手册 - 软件 | PDF 526 KB | |
| 手册 - 开发工具 | PDF 381 KB | |
| 技术摘要 | PDF 800 KB | |
9 items
|
||
设计和开发
样例程序
开发板与套件
RA2E1 IO-Link 压力传感器解决方案演示套件
我们提供通过32位MCU RA2E1和 ZSSC3240套件（传感器信号调节器）实现压力测量、信号处理和IO-Link通信的解决方案，搭载Arm Cortex-M23内核@48MHz，支持超小型和低功耗环境。
One-Wire Current Loop Add-on Board for ZSSC32xx
The ZSSC32XX-CLOWI-PCB is an extension for products of ZSSC32xx series featuring 4–20 mA current loop output. The board is and add-on PCB to the product related...
模型
ECAD 模块
Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on products in the Product Options table. If a symbol or model isn't available, it can be requested directly from the website.
Processing table
简介 |
Pkg. Type |
Lead Count (#) |
Temp. Range |
Carrier Type |
Moisture Sensitivity Level (MSL) |
Price (USD) | 1ku |
购买 / 样片 |
|
|---|---|---|---|---|---|---|---|---|
| 器件号 | ||||||||
| 304μm thickness, no inking | WAFER | 0 | -40 to 85°C | Wafer | 1 | |||
| 725μm thickness, no inking | WAFER | 0 | -40 to 85°C | Wafer | 1 | |||
| 304μm thickness, with inking | WAFER | 0 | -40 to 85°C | Wafer | 1 | |||
| 725μm thickness, with inking | WAFER | 0 | -40 to 85°C | Wafer | 1 | |||
| 304μm thickness, no inking | WAFER | 0 | -40 to 125°C | Wafer | 1 | |||
| 725μm thickness, no inking | WAFER | 0 | -40 to 125°C | Wafer | 1 | |||
| 304μm thickness, with inking | WAFER | 0 | -40 to 125°C | Wafer | 1 | |||
| 725μm thickness, with inking | WAFER | 0 | -40 to 125°C | Wafer | 1 | |||
| 13-inch Reel | VFQFPN | 24 | -40 to 85°C | Reel | 1 | |||
| 13-inch Reel | VFQFPN | 24 | -40 to 125°C | Reel | 1 | 获取样片, | ||
| 7-inch Reel | VFQFPN | 24 | -40 to 125°C | Reel | 1 | 2.825 | ||
| 304μm thickness, no inking, pre-configured for current loop | WAFER | 0 | -40 to 125°C | Wafer | 1 | |||
| 13-inch Reel, pre-configured for current loop | VFQFPN | 24 | -40 to 125°C | Reel | 1 | 获取样片, |
Tips for Using This Parametric Table:
- Hide Filters button in header: Collapse or expands filters
- Column sort buttons in header: Sort Column alphabetically / numerically descending or ascending
- Reset button in header: Reset all filters to the page default
- Full Screen button in header: Expand the table to full screen view (user must close out of full screen before they can interact with rest of page)
- Export button in header: Export the filtered results of the table to an Excel document
- Filter parts search bar in header: Type to filter table results by part number
- Hide column button in column headers: Select to hide columns in table
- AND / OR toggle switches in header: Toggles the logic of this particular filter to be “AND” or “OR” logic for filtering results
- Multiselect checkboxes at beginning of each row in table: Select these checkboxes to compare products against each other
- Document icon next to product name in row: View the featured document for this product
- Chip icon next to the right of the document icon in row: View the block diagram for this product
- Cart icon to the right of the chip icon: Indicates that samples are available for this product
视频和培训
IDT Sensor Signal Conditioner (SSC) Evaluation Kit Overview
A brief introduction and overview of IDT's (acquire by Renesas) sensor signal conditioner evaluation kits. Evaluation kits generally consist of three parts: a communication interface board, a device board, and a sensor simulator board - all connected together. A sophisticated software GUI accompanies the kit, enabling an engineer to learn how to use the part rapidly, do quick prototyping, and practice calibrations.
Presented by David Grice, applications engineer at IDT. For more information about IDT's sensor signal conditioner products, visit the Sensor Signal Conditioner page.
Video List
新闻和博客
| 博客 | 2023年2月16日 |
