|*************************************************************************** | Intersil ISL32273E | | 16 PIN SOIC, TSSOP FOR VCC=3.3V | |*************************************************************************** | [IBIS Ver] 3.2 [File name] isl32273e_3v.ibs [File Rev] 2.1 [Date] March 20, 2011 [Source] Data used in this IBIS model was gathered from bench testing and datasheet specifications. This model has not been software simulated. Package parasitics are industry norms, rather than actual measured values. [Notes] This is an IBIS model for an EIA-TIA RS-485/422 Quad Receiver. [Disclaimer] Intersil Corporation provides IBIS models as a service to its customers, and hereby grants the user of this IBIS model a non-exclusive, nontransferable license to use this IBIS model. The user shall read this disclaimer and agree to the terms herein before using this IBIS model. If the user does not accept these terms, the IBIS model may not be used. Your use of this IBIS model shall serve as acceptance of these terms. The user is not granted rights to sell, loan, rent, lease or license the IBIS model in whole, in part, or in any modified form to anyone other than the user. The user may modify the IBIS model to suit their specific application, but all rights to derivative works shall belong to Intersil Corporation. This IBIS model is provided on an "AS IS" basis. Intersil Corporation makes absolutely no warranty with respect to the information contained herein. INTERSIL CORPORATION DISCLAIMS, AND THE CUSTOMER WAIVES, ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY, NON-INFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE OR APPLICATION. The entire risk as to quality and performance is with the customer. Accordingly, in no event shall Intersil Corporation, its subsidiaries, directors, employees, or agents be liable for any damages, lost profits, or any other incidental, consequential, special, or punitive damages arising out of the use of this IBIS model. Furthermore, Intersil Corporation reserves the right to make changes without notice to any IBIS model for any reason. Intersil Corporation does not convey any license under patent rights or any other intellectual property rights, including those of third parties. Intersil Corporation is not obligated to provide maintenance or support for these IBIS models. [Copyright] (C) Copyright 2009, Intersil Corporation. All Rights Reserved. |***************************************************************************** | Component ISL3273E |***************************************************************************** [Component] ISL32273E [Manufacturer] Intersil [Package] | typ min max R_pkg 0.27 NA NA L_pkg 2.75nH NA NA C_pkg 0.23pf NA NA | |**************************************************************************** | [Pin] signal_name model_name R_pin L_pin C_pin | 1 B1 REC_IN 2 A1 REC_IN 3 RO1 REC_OUT 4 EN REC_ENABLE 5 RO2 REC_OUT 6 A2 REC_IN 7 B2 REC_IN 8 GND GND 9 B3 REC_IN 10 A3 REC_IN 11 RO3 REC_OUT 12 ENbar REC_ENABLE 13 RO4 REC_OUT 14 A4 REC_IN 15 B4 REC_IN 16 VCC POWER [Diff_pin] inv_pin vdiff tdelay_typ tdelay_min tdelay_max | The 'A' pin is Diff_pin and the 'B' pin is the inv-pin for the receiver input. 2 1 200mV 0ns 0ns 0ns 6 7 200mV 0ns 0ns 0ns 10 9 200mV 0ns 0ns 0ns 14 15 200mV 0ns 0ns 0ns |**************************************************************************** | Reciever Input Model |**************************************************************************** | [Model] REC_IN Model_type Input |Signals: A,B Vinl = 1.5V Vinh = 1.7V | variable typ min max C_comp 9pF NA NA |**************************************************************************** | typ min max [Temperature Range] 25.0 -40.00 125.0 [Voltage range] 3.3V 3.0V 3.6V |**************************************************************************** [GND_clamp] | Voltage I(typ) I(min) I(max) -3.30 -6.35E-05 NA NA -1.50 -4.17E-05 NA NA 0.00 -2.32E-05 NA NA 1.50 -4.51E-06 NA NA 3.30 1.83E-05 NA NA [Power_clamp] |------------------------------------------------------------- | Note that the[POWER_clamp]voltage table is referenced to Vcc | and is calculated using Vtable=Vcc - Vmeasured. |------------------------------------------------------------- | Voltage I(typ) I(min) I(max) 0.00 1.83E-05 NA NA -1.00 3.10E-05 NA NA -4.20 7.12E-05 NA NA -4.70 7.74E-05 NA NA -6.70 1.02E-04 NA NA |**************************************************************************** | Receiver Enable Model |**************************************************************************** [Model] REC_ENABLE Model_type Input |Signals EN, ENbar Vinh = 2.0 Vinl = 0.8 | typ min max C_comp 2.6pF NA NA |**************************************************************************** | typ min max [Temperature Range] 25.0 -40.0 125.0 [Voltage range] 3.3V 3.0V 3.6V | |**************************************************************************** [GND_clamp] | Voltage I(typ) I(min) I(max) -3.30 -1.00E+00 NA NA -1.10 -1.00E+00 NA NA -1.00 -1.50E-01 NA NA -0.90 -7.30E-02 NA NA -0.80 -2.14E-02 NA NA -0.70 -3.51E-03 NA NA -0.60 -3.94E-04 NA NA -0.50 -3.57E-05 NA NA -0.40 -7.91E-06 NA NA -0.30 -6.58E-06 NA NA 3.30 1.39E-08 NA NA [Power_clamp] |------------------------------------------------------------- | Note that the[POWER_clamp]voltage table is referenced to Vcc | and is calculated using Vtable=Vcc - Vmeasured. |------------------------------------------------------------- | Voltage I(typ) I(min) I(max) 0.00 1.39E-08 NA NA -6.20 1.11E-05 NA NA -6.30 6.48E-04 NA NA -6.40 2.02E-02 NA NA -6.50 4.39E-02 NA NA -6.60 6.56E-02 NA NA -6.70 8.70E-02 NA NA |**************************************************************************** | Receiver Output Model |**************************************************************************** [Model] REC_OUT Model_type 3-state | Signals RO Vmeas = 1.5V |Reference voltage for timing measurements Cref = 15pF |Timing specification test load capacitance value Vref = 1.65V |Timing specification test load voltage; GND Rref = 1.00E+03 |Timing specification test load resistance | variable typ min max C_comp 2.5pF NA NA |**************************************************************************** | typ min max [Temperature Range] 25.0 -40.0 85.0 [Voltage range] 3.3V 3.0V 3.6V |**************************************************************************** [GND_clamp] | Voltage I(typ) I(min) I(max) -3.30 -1.00E+00 NA NA -1.10 -1.00E+00 NA NA -1.00 -1.50E-01 NA NA -0.90 -7.01E-02 NA NA -0.80 -1.91E-02 NA NA -0.70 -3.35E-03 NA NA -0.60 -6.24E-04 NA NA -0.50 -7.89E-05 NA NA -0.40 -3.45E-06 NA NA -0.30 -8.01E-08 NA NA -0.20 -1.75E-09 NA NA -0.10 -3.04E-11 NA NA 0.00 7.59E-12 NA NA 3.20 5.67E-11 NA NA 3.30 5.56E-11 NA NA [Power_clamp] |------------------------------------------------------------- | Note that the[POWER_clamp]voltage table is referenced to Vcc | and is calculated using Vtable=Vcc - Vmeasured. |------------------------------------------------------------- | Voltage I(typ) I(min) I(max) 0.00 5.56E-11 NA NA -0.20 6.21E-11 NA NA -0.30 1.53E-10 NA NA -0.40 4.08E-09 NA NA -0.50 1.90E-07 NA NA -0.60 8.70E-06 NA NA -0.70 3.64E-04 NA NA -0.80 8.15E-03 NA NA -0.90 4.11E-02 NA NA -1.00 8.89E-02 NA NA -1.10 1.50E-01 NA NA -1.20 1.00E+00 NA NA -6.70 1.00E+00 NA NA [Pulldown] | Voltage I(typ) I(min) I(max) -3.30 -6.99E-02 NA NA -0.90 -6.99E-02 NA NA -0.80 -5.90E-02 NA NA -0.70 -3.33E-02 NA NA -0.60 -2.34E-02 NA NA 0.20 7.16E-03 NA NA 0.60 1.94E-02 NA NA 0.90 2.60E-02 NA NA 1.20 3.03E-02 NA NA 1.70 3.34E-02 NA NA 2.00 3.40E-02 NA NA 3.30 3.47E-02 NA NA 3.90 3.47E-02 NA NA 4.00 3.50E-02 NA NA 4.10 4.08E-02 NA NA 4.20 7.05E-02 NA NA 4.30 1.50E-01 NA NA 4.40 1.00E+00 NA NA 10.00 1.00E+00 NA NA [Pullup] |------------------------------------------------------------- | Note that the[Pullup]voltage table is referenced to Vcc | and is calculated using Vtable=Vcc - Vmeasured. |------------------------------------------------------------- | Voltage I(typ) I(min) I(max) 6.60 -1.00E+00 NA NA 4.40 -1.00E+00 NA NA 4.30 -1.50E-01 NA NA 4.20 -7.00E-02 NA NA 4.10 -2.30E-02 NA NA 2.30 -2.18E-02 NA NA 1.60 -2.00E-02 NA NA 1.30 -1.84E-02 NA NA 0.80 -1.35E-02 NA NA 0.20 -3.98E-03 NA NA 0.00 1.40E-05 NA NA -0.50 1.14E-02 NA NA -0.70 1.66E-02 NA NA -0.80 2.25E-02 NA NA -0.90 4.85E-02 NA NA -1.00 9.34E-02 NA NA -6.70 9.34E-02 NA NA |**************************************************************************** [Ramp] | typ min max dV/dt_r 1.87V/1.66ns NA NA dV/dt_f 1.91V/0.98ns NA NA R_load = 1.00E+03ohms [Rising Waveform] R_fixture = 1.00E+03 V_fixture = 1.65V C_fixture =15pF | Time V(typ) V(min) V(max) 0.00E+00 0.058 NA NA 8.00E-10 0.058 NA NA 1.00E-09 0.046 NA NA 1.20E-09 0.061 NA NA 1.40E-09 0.149 NA NA 1.60E-09 0.393 NA NA 1.80E-09 0.807 NA NA 2.00E-09 1.232 NA NA 2.20E-09 1.564 NA NA 2.40E-09 1.777 NA NA 2.80E-09 2.026 NA NA 3.60E-09 2.812 NA NA 3.80E-09 2.924 NA NA 4.80E-09 3.166 NA NA 5.20E-09 3.212 NA NA 5.60E-09 3.219 NA NA 6.00E-09 3.244 NA NA 6.40E-09 3.244 NA NA 6.80E-09 3.205 NA NA 7.60E-09 3.217 NA NA 9.40E-09 3.136 NA NA 1.02E-08 3.150 NA NA 1.06E-08 3.130 NA NA 1.16E-08 3.145 NA NA 1.28E-08 3.218 NA NA 1.48E-08 3.155 NA NA 1.82E-08 3.165 NA NA 2.04E-08 3.211 NA NA 2.10E-08 3.201 NA NA 2.12E-08 3.211 NA NA [Falling Waveform] R_fixture = 1.00E+03 V_fixture = 1.65V C_fixture = 15pF | Time V(typ) V(min) V(max) 0.00E+00 3.256 NA NA 1.20E-09 3.257 NA NA 1.60E-09 3.235 NA NA 1.80E-09 3.137 NA NA 2.00E-09 2.854 NA NA 2.60E-09 1.325 NA NA 2.80E-09 0.930 NA NA 3.00E-09 0.685 NA NA 3.60E-09 0.252 NA NA 3.80E-09 0.151 NA NA 4.00E-09 0.079 NA NA 4.40E-09 0.021 NA NA 4.60E-09 0.026 NA NA 5.40E-09 0.059 NA NA 6.00E-09 0.140 NA NA 7.00E-09 0.192 NA NA 7.40E-09 0.184 NA NA 7.80E-09 0.145 NA NA 8.40E-09 0.084 NA NA 9.20E-09 0.092 NA NA 1.00E-08 0.109 NA NA 1.22E-08 0.162 NA NA 1.24E-08 0.141 NA NA 1.36E-08 0.124 NA NA 1.50E-08 0.187 NA NA 1.64E-08 0.181 NA NA 1.72E-08 0.146 NA NA 1.86E-08 0.140 NA NA 1.98E-08 0.141 NA NA 2.08E-08 0.115 NA NA 2.10E-08 0.097 NA NA 2.12E-08 0.090 NA NA |**************************************************************************** [End]