ZMID4200 Inductive Position Sensing Starter Kit
The ZMID4201STKIT is an all-in-one starter kit, providing fully-functional evaluation of the ZMID4200 position sensor. This kit combines the linear, rotary, and arc...
概览
简介
The ZMID4200 is an inductive position sensor IC with analog output, used for absolute rotary and linear motion sensing in industrial and consumer applications. The ZMID4200 uses the physical principles of induction in a wire loop and Eddy currents to detect the position of a metallic target that is sliding or rotating above a set of coils, consisting of one transmitter coil and two receiver coils. The three coils are typically printed as copper traces on a printed circuit board (PCB). They are arranged such that the transmitter coil induces a secondary voltage in the receiver coils which depends on the position of the metallic target above the coils. After demodulating and processing the secondary voltages from the receiver coils, a signal representative of the metallic target’s position over the coils is obtained. The ZMID4200 is qualified to function up to 150°C ambient temperature.
特性
- Inductive principle
- Rotation sensing up to a full turn of 360°
- Analog, PWM or SENT output with programmable limits
- Overvoltage, reverse polarity, ESD and short circuit protection
- 10-bit resolution (Analog and PWM)
- 12-bit resolution (SENT)
- Power or ground loss detection
- Facilitates redundant design requirements
- Programmable linearity correction
- Adaptive gain control supporting a wide range of coil designs
- Diagnostic features
- Overvoltage and reverse polarity protection up to ±18V
- Small 14-TSSOP package
产品对比
应用
应用
Qualified for industrial, medical and consumer applications only – not qualified for usage in automotive applications
- Rotary position sensors up to 360°; e.g. rotary actuators, potentiometer replacement
- Small-angle sensors or arc-motion sensors; e.g. pedal or valve sensors, robotics
- Linear motion sensors; e.g. linear-actuators, position sensors, fluid-level sensors, slide potentiometer replacement
文档
= 相关文档
请登录后开启订阅
|
|
|
|
|---|---|---|
| 类型 | 文档标题 | 日期 |
| 数据手册 | PDF 758 KB | |
| 原理图 | PDF 179 KB | |
| 原理图 | PDF 132 KB | |
| 手册 - 硬件 | PDF 2.12 MB | |
| 手册 - 软件 | PDF 532 KB | |
| 手册 - 软件 | PDF 1.16 MB | |
| 手册 - 软件 | PDF 1.06 MB | |
| 技术摘要 | PDF 583 KB | |
| 其他 | PDF 85 KB | |
9 items
|
||
设计和开发
软件与工具
开发板与套件
开发板与套件
模型
ECAD 模块
Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on products in the Product Options table. If a symbol or model isn't available, it can be requested directly from the website.
Processing table
| TSSOP | 14 | -40 to 150°C | Reel | 1 | 获取样片, |
Tips for Using This Parametric Table:
- Hide Filters button in header: Collapse or expands filters
- Column sort buttons in header: Sort Column alphabetically / numerically descending or ascending
- Reset button in header: Reset all filters to the page default
- Full Screen button in header: Expand the table to full screen view (user must close out of full screen before they can interact with rest of page)
- Export button in header: Export the filtered results of the table to an Excel document
- Filter parts search bar in header: Type to filter table results by part number
- Hide column button in column headers: Select to hide columns in table
- AND / OR toggle switches in header: Toggles the logic of this particular filter to be “AND” or “OR” logic for filtering results
- Multiselect checkboxes at beginning of each row in table: Select these checkboxes to compare products against each other
- Document icon next to product name in row: View the featured document for this product
- Chip icon next to the right of the document icon in row: View the block diagram for this product
- Cart icon to the right of the chip icon: Indicates that samples are available for this product
视频和培训
新闻和博客
| 博客 | 2024年4月15日 | ||
| 新闻 | 2017年3月27日 |
