The Peripheral Driver Generator is a utility that assists a product developer in creating various built-in peripheral I/O drivers of a microcomputer and the routines (functions) to initialize those drivers by eliminating the developer having to do manual coding. All of the necessary source codes are prepared by the Peripheral Driver Generator according to user settings, so that the development time and development cost can be greatly reduced.
The Peripheral Driver Generator is very simple to use, because all operations are performed through a user-friendly GUI. The status of peripheral I/O mode can be checked quickly and easily.
Also, a pin conflict between peripheral functions can be verified (V.2 only).
The Peripheral Driver Generator is a tool that you can install and use free of charge. Its operation is not guaranteed, although we have carefully evaluated the generated code. The user assumes all responsibility related to installing and using this tool.
Note CS+ (supports only Peripheral Driver Generator V.2), e² studio V3.0.0.22 and later (supports only Peripheral Driver Generator V.2), or High-performance Embedded Workshop.
Latest Ver.: V.2.09
Released: May 16, 2014
Details of upgrade (See Tool News)
文档标题 | 类型 | 日期 | |
---|---|---|---|
PDF1.01 MB
|
指南
|
||
PDF3.26 MB
|
手册 - 开发工具
|
||
PDF3.08 MB
|
手册 - 开发工具
|
||
PDF2.48 MB
|
手册 - 开发工具
|
||
PDF2.66 MB
|
手册 - 开发工具
|
||
PDF2.44 MB
|
手册 - 开发工具
|
||
PDF4.45 MB
|
手册 - 开发工具
|
||
PDF4.22 MB
|
手册 - 开发工具
|
||
PDF5.35 MB
|
手册 - 开发工具
|
||
PDF534 KB
|
手册 - 开发工具
|
||
PDF1.48 MB
|
手册 - 开发工具
|
||
PDF1.89 MB
|
手册 - 开发工具
|
||
PDF2.67 MB
|
手册 - 开发工具
|
||
PDF835 KB
|
手册 - 开发工具
|
||
PDF531 KB
|
手册 - 开发工具
|
||
PDF177 KB
|
Release Note
|
||
PDF271 KB
|
Tool News - Note
|
||
PDF204 KB
|
Tool News - Note
|
||
PDF203 KB
|
Tool News - Note
|
||
PDF323 KB
|
Tool News - Note
|
||
PDF202 KB
|
Tool News - Note
|
||
PDF202 KB
|
Tool News - Note
|
||
PDF202 KB
|
Tool News - Note
|
||
PDF205 KB
|
Tool News - Note
|
||
PDF202 KB
|
Tool News - Note
|
||
PDF203 KB
|
Tool News - Note
|
||
PDF203 KB
|
Tool News - Note
|
||
PDF205 KB
|
Tool News - Note
|
||
Note on Using Peripheral Driver Generator V.2.08 -- External Bus Settings for RX62N Group of MCUs -- PDF203 KB
|
Tool News - Note
|
||
PDF202 KB
|
Tool News - Note
|
||
PDF206 KB
|
Tool News - Note
|
||
PDF324 KB
|
Tool News - Note
|
||
PDF202 KB
|
Tool News - Note
|
||
PDF266 KB
|
Tool News - Note
|
||
PDF266 KB
|
Tool News - Note
|
||
PDF508 KB
|
Tool News - Note
|
||
PDF203 KB
|
Tool News - Note
|
||
PDF203 KB
|
Tool News - Note
|
||
PDF202 KB
|
Tool News - Note
|
||
PDF204 KB
|
Tool News - Note
|
||
PDF204 KB
|
Tool News - Note
|
||
PDF251 KB
|
Tool News - Note
|
||
PDF205 KB
|
Tool News - Note
|
||
PDF204 KB
|
Tool News - Note
|
||
PDF204 KB
|
Tool News - Note
|
||
PDF206 KB
|
Tool News - Note
|
||
PDF204 KB
|
Tool News - Note
|
||
PDF202 KB
|
Tool News - Note
|
||
PDF202 KB
|
Tool News - Note
|
||
PDF205 KB
|
Tool News - Note
|
||
PDF204 KB
|
Tool News - Note
|
||
PDF209 KB
|
Tool News - Note
|
||
PDF249 KB
|
Tool News - Note
|
||
PDF202 KB
|
Tool News - Note
|
||
PDF203 KB
|
Tool News - Note
|
||
PDF351 KB
|
Tool News - Release
|
||
PDF1.12 MB
|
Tool News - Release
|
||
PDF514 KB
|
Tool News - Release
|
||
PDF588 KB
|
Tool News - Release
|
||
PDF204 KB
|
Tool News - Release
|
||
PDF373 KB
|
Tool News - Release
|
||
PDF316 KB
|
Tool News - Release
|
||
PDF204 KB
|
Tool News - Release
|
||
PDF202 KB
|
Tool News - Release
|
||
PDF317 KB
|
Tool News - Release
|
||
PDF194 KB
|
Tool News - Release
|
||
PDF193 KB
|
Tool News - Release
|
||
PDF195 KB
|
Tool News - Release
|
The Peripheral Driver Generator and the library included in it are not evaluated in combination with the real-time OS environment. When using them, combined with the real-time OS, customers should consider the following use conditions in advance and then please use those at their own discretion.
MCU (Group) | Peripheral I/Os for which drivers can be created and setup by the Peripheral Driver Generator |
---|---|
RX220 | Clock, communication function (SCI, I2C, SPI), timers (MTU2, POE2, TMR, CMT, RTC, IWDT), buses, I/O, Interrupt control unit (ICU), A/D (12-bit), DMA (DMAC, DTC), CRC, LVD, Low power consumption, MPC, Clock frequency accuracy measurement circuit (CAC), Event link controller(ELC), Data operation circuit(DOC), Comparator (CMPA) |
RX210 | Clock, communication function (SCI, I2C, SPI), timers (MTU2, POE2, TMR, CMT, RTC, WDT, IWDT, TPU), buses, I/O, Interrupt control unit (ICU), A/D (12-bit, Temperature sensor), D/A, DMA (DMAC, DTC), CRC, LVD, Low power consumption, MPC, Clock frequency accuracy measurement circuit (CAC), Event link controller(ELC), Data operation circuit(DOC), Comparator (CMPA,CMPB) |
RX630 | Clock, communication function (SCI, I2C, SPI, IEB), timers (MTU2, MCK, POE2, TPU, PPG, TMR, CMT, RTC, WDT, IWDT), buses, I/O, Interrupt control unit (ICU), A/D (12-bit, 10-bit, Temperature sensor), D/A, DMA (DMAC, DTC), CRC, LVD, Low power consumption, MPC |
RX63T | Clock, communication function (SCI, I2C, SPI), timers (MTU3, POE3, CMT, WDT, IWDT, GPT), buses, I/O, Interrupt control unit (ICU), A/D (10-bit, 12-bit), D/A, DMA (DMAC, DTC), CRC, LVD, Low power consumption, MPC, Clock frequency accuracy measurement circuit (CAC), Data operation circuit(DOC) |
RX63N, RX631 | Clock, communication function (SCI, I2C, SPI, IEB), timers (MTU2, MCK, POE2, TPU, PPG, TMR, CMT, RTC, WDT, IWDT), buses, I/O, Interrupt control unit (ICU), A/D (12-bit, 10-bit, Temperature sensor), D/A, DMA (DMAC, EXDMAC, DTC), CRC, LVD, Low power consumption, MPC |
RX62G | Clock, communication function (SCI, I2C, SPI, LIN), timers (MTU3, POE3, CMT, WDT, IWDT, GPT), buses, I/O, Interrupt control unit (ICU), A/D (12-bit, 10-bit), DMA (DTC), CRC, LVD, Low power consumption |
RX62T | Clock, communication function (SCI, I2C, SPI, LIN), timers (MTU3, POE3, CMT, WDT, IWDT, GPT), buses, I/O, Interrupt control unit (ICU), A/D (12-bit, 10-bit), DMA (DTC), CRC, LVD, Low power consumption |
RX62N | Clock, communication function (SCI, I2C, SPI), timers (TMR, CMT, MTU2 (Note1), WDT, IWDT, POE2, PPG, RTC), buses, I/O, Interrupt control unit (ICU), A/D (10-bit, 12-bit), D/A, DMA (DMAC, EXDMAC, DTC), CRC, LVD, Low power consumption |
RX610 | Clock, communication function (SCI, I2C), timers (TMR, TPU, CMT), I/O, Interrupt control unit (ICU), A/D, DMAC (* Supports only little endian) |
Note
MCU (Group) | Peripheral I/Os for which drivers can be created and setup by the Peripheral Driver Generator |
---|---|
SH7125 | Serial, timer (MTU2), I/O (Includes PFC), INT (external interrupt), and A/D |
M16C/62P | Serial, timer, I/O, INT (external interrupt), and A/D |
M16C/28, M16C/28B, M16C/29 | Serial, timer, I/O, INT (external interrupt), and A/D |
R8C/13, R8C/22, R8C/23, R8C/24, R8C/25, R8C/26, R8C/27, R8C/28, R8C/29, R8C/2A, R8C/2B, R8C/2C, R8C/2D | Serial, timer, I/O, INT (external interrupt), and A/D |
H8S/20103, H8S/20203, H8S/20223 | Serial, timer, I/O (Includes PMC), INT (external interrupt), A/D, DTC, and ELC |
H8/3687, H8/36077, H8/36049, H8/36109 | Serial, timer, I/O, INT (external interrupt), and A/D |
Family | Series | Group | Support information |
---|---|---|---|
RX | RX200 | RX210, RX220 | Peripheral I/O Drivers Supported |
RX600 | RX610, RX62N, RX62G, RX62T, RX630, RX63N/RX631, RX63T |
Peripheral Driver Generator V.1 is NOT available for V.6.00 Release 00 or later of the C/C++ Compiler Package for M16C Series and R8C Family [M3T-NC30WA]. Use it with an old version in V.5.
Family | Series | Group | Support information |
---|---|---|---|
SuperH | SH/Tiny | SH7125 | Peripheral I/O Drivers Supported |
M16C | M16C/60 | M16C/62P | |
M16C/Tiny | M16C/28, M16C/28B, M16C/29 | ||
R8C | R8C/2x, R8C/1x | R8C/22, R8C/23, R8C/24, R8C/25, R8C/26, R8C/27, R8C/28, R8C/29, R8C/2A, R8C/2B, R8C/2C, R8C/2D, R8C/13 | |
H8S | H8S/Tiny | H8S/20103, H8S/20203, H8S/20223 | |
H8 | H8/300H Tiny | H8/3687, H8/36077, H8/36049, H8/36109 |