opamp_on_opamp_cfg_t Struct Reference

#include <r_opamp.h>

Data Fields
opamp_agt_link_t	agt_link
opamp_mode_t	mode
	Low power, middle speed, or high speed mode.
opamp_trigger_t	trigger_channel_0
	Start and stop triggers for channel 0.
opamp_trigger_t	trigger_channel_1
	Start and stop triggers for channel 1.
opamp_trigger_t	trigger_channel_2
	Start and stop triggers for channel 2.
opamp_trigger_t	trigger_channel_3
	Start and stop triggers for channel 3.

Detailed Description

OPAMP configuration extension. This extension is required and must be provided in opamp_cfg_t::p_extend.

Field Documentation

agt_link

opamp_agt_link_t opamp_on_opamp_cfg_t::agt_link

Configure which AGT links are paired to which channel. Only applies to channels if OPAMP_TRIGGER_AGT_START_SOFTWARE_STOP or OPAMP_TRIGGER_AGT_START_ADC_STOP is selected for the channel.

---

The documentation for this struct was generated from the following file:

• r_opamp.h