Here is a list of all documented struct and union fields with links to the struct/union documentation for each field:

- r -

• r : display_brightness_t , display_color_t , display_contrast_t , display_gamma_correction_t
• ram_buffer_size : sf_block_media_ram_instance_ctrl_t
• rand_num : sf_ble_sec_info_t , sf_ble_sm_enc_info_t , sf_ble_sm_key_ind_t
• randomNumberGenerate : sf_crypto_trng_api_t
• rate : i2c_cfg_t , sf_ble_blp_meas_info_t
• rd_index : ctsu_instance_ctrl_t
• read : adc_api_t , cac_api_t , can_api_t , flash_api_t , i2c_api_master_t , i2s_api_t , ptpedmac_api_t , qspi_api_t , riic_instance_ctrl_t , riic_slave_instance_ctrl_t , sci_i2c_instance_ctrl_t , sdmmc_api_t , sf_block_media_api_t , sf_comms_api_t , sf_console_api_t , sf_i2c_api_t , sf_memory_api_t , sf_spi_api_t , spi_api_t , uart_api_t
• read32 : adc_api_t
• read_bytes_max : uart_info_t
• read_irq : ctsu_cfg_t , ctsu_instance_ctrl_t
• readIo : sdmmc_api_t
• readIoExt : sdmmc_api_t
• ready : sdmmc_info_t
• reason : sf_ble_disconnect_t
• ref : ctsu_self_buf_t
• ref_time : sf_ble_prf_tip_write_data_t
• reference_clock : cac_instance_ctrl_t
• reference_voltage : bsp_feature_adc_t
• refresh : wdt_api_t
• reg_id : adc_sample_state_t
• reg_status : sf_cellular_network_status_t
• region_info : sf_memory_qspi_nor_instance_ctrl_t
• remain : riic_instance_ctrl_t , riic_slave_instance_ctrl_t , sci_i2c_instance_ctrl_t
• remote_ip : sf_cellular_socket_info_t
• remote_port : sf_cellular_socket_info_t
• rendering_enable : sf_el_gx_instance_ctrl_t
• repeat_area : transfer_info_t
• repetition : agt_input_capture_instance_ctrl_t , gpt_input_capture_instance_ctrl_t , input_capture_cfg_t
• report : sf_ble_prf_hid_report_ind_t
• report_type : sf_ble_prf_hid_report_desc_t
• req_high_throughput : sf_wifi_cfg_t
• req_type : RBLE_GATT_DISC_CHAR_REQ , RBLE_GATT_DISC_SVC_REQ , RBLE_GATT_READ_CHAR_REQ , RBLE_GATT_WRITE_CHAR_REQ
• reserved : sf_ble_blp_meas_info_t , sf_ble_connect_info_t , sf_ble_long_attr_info_t , sf_ble_prf_cts_curr_time_t , sf_ble_prf_cts_date_time_t , sf_ble_prf_hid_report_ind_t , sf_ble_prf_htp_temp_info_t , sf_ble_prf_ndcs_time_dst_t , sf_message_buffer_ctrl_t::st_buffer_ctrl_flag
• reserved2 : sf_ble_connect_info_t
• reserved3 : sf_ble_connect_info_t
• reset : cac_api_t , flash_api_t , i2c_api_master_t , sf_cellular_api_t , sf_i2c_api_t , sf_touch_panel_chip_api_t , sf_touch_panel_v2_api_t , timer_api_t , transfer_api_t
• reset_control : wdt_cfg_t
• reset_level : sf_cellular_extended_cfg_t , sf_wifi_qca4010_extended_cfg_t
• resolution : adc_cfg_t , sdadc_instance_ctrl_t
• resource_lock : glcd_ctrl_t
• resource_lock_tx_rx : riic_instance_ctrl_t , sci_spi_instance_ctrl_t
• resp : RBLE_GATT_EVENT::Event_Gatt_Parameter_u::RBLE_GATT_Write_Cmd_Ind_t
• resp_buffer_length : sf_wifi_qca4010_instance_cfg_t
• resp_wait_time : sf_cellular_at_cmd_set_t , sf_wifi_qca4010_at_cmd_set_t
• response : sf_ble_gatt_attr_event_t
• response_required : sf_ble_write_cmd_event_data_t
• restart : riic_instance_ctrl_t , sci_i2c_instance_ctrl_t
• restarted : riic_instance_ctrl_t , sci_i2c_instance_ctrl_t , sf_i2c_instance_ctrl_t
• resume : sf_audio_playback_api_t
• retry : sf_cellular_at_cmd_set_t
• retry_count : sf_cellular_command_parameters_info_t
• retry_delay : sf_cellular_at_cmd_set_t , sf_cellular_command_parameters_info_t , sf_wifi_qca4010_at_cmd_set_t
• riic_fastplus_rise_time : bsp_feature_riic_t
• riic_std_fast_rise_time : bsp_feature_riic_t
• ringer_cp : sf_ble_prf_ringer_cp_change_t
• ringer_setting : sf_ble_prf_ringer_setting_ntf_t
• rkey_dist : sf_ble_bonding_req_ind_t , sf_ble_bonding_start_t
• rkeys : sf_ble_bonding_response_t
• rotation_angle : sf_touch_panel_v2_cfg_t , sf_touch_panel_v2_instance_ctrl_t
• rr_interval : sf_ble_hrp_api_hrmeas_t
• rr_interval_num : sf_ble_hrp_api_hrmeas_t
• rs485_de_pin : sci_uart_instance_ctrl_t , uart_on_sci_cfg_t
• rspi_clksyn : spi_on_rspi_cfg_t
• rspi_comm : spi_on_rspi_cfg_t
• rssi : sf_ble_info_t , sf_ble_scan_t , sf_cellular_info_t , sf_cellular_network_status_t , sf_wifi_info_t , sf_wifi_scan_t
• rts : sf_wifi_cfg_t
• runApply : sf_power_profiles_v2_api_t
• rx_bd_space : NX_REC
• rx_bytes : sf_cellular_stats_t
• rx_bytes_count : sci_uart_instance_ctrl_t
• rx_dest_bytes : ssi_instance_ctrl_t
• rx_dst_bytes : sci_uart_instance_ctrl_t
• rx_edge_start : uart_on_sci_cfg_t
• rx_err : sf_cellular_stats_t
• rx_fifo_trigger : uart_on_sci_cfg_t
• rx_in_use : ssi_instance_ctrl_t
• rx_pkts : sf_wifi_stats_t
• rx_thread_priority : sf_cellular_comms_extend_cfg_t
• rx_transfer_in_progress : sci_uart_instance_ctrl_t
• rx_zero_copy : sf_wifi_nsal_cfg_t
• rxi_ipl : i2c_cfg_t , i2s_cfg_t , spi_cfg_t , uart_cfg_t
• rxi_irq : riic_instance_ctrl_t , riic_slave_instance_ctrl_t , rspi_instance_ctrl_t , sci_i2c_instance_ctrl_t , sci_spi_instance_ctrl_t , sci_uart_instance_ctrl_t , ssi_instance_ctrl_t