
This file contains the board information for the board fabricator

To: Vendor					Date: 02-03-09

From: Intersil Corporation-RTP, NC.
Address: 	Intersil Corporation
		Building 2A, Suite 105
		4020 Stirrup Creek Drive
		Durham, NC. 27703	

Designer:	Joe De Maio	
E-MAIL:	jdemaio@intersil.com	
Phone:	919-405-3678 - work
		919-545-9419 - home

Alternate Contact:
Engineer:	Steve Laur
E-MAIL:	slaur@intersil.com	
Phone:	919-405-3631 - work

Zip File Name:	isl95210_eval1z_b.zip

GERBER:		rs274x
LAYOUT TOOL:	Allegro 15.7

**********************************************************************

NOTE:		

**********************************************************************

FILES:

README			This text file

**********************************************************************

GERBER FILMS:

top.art			Component side
l2.art			Internal Plane (pos)
l3.art			Internal Plane/etch (pos)
bottom.art			Solder side
pmaskt.art			Pastemask top
pmaskb.art			Pastemask bottom
smaskt.art			Soldermask top
smaskb.art			Soldermask bottom
silkt.art			Silkscreen top
silkb.art			Silkscreen bottom
fab.art			Fabrication Drawing

**********************************************************************

TEXT FILES:

art_aper.txt		APERTURE LIST TEXT FILE   
art_param.txt		ARTWORK  parameter text file
nc_param.txt		NC-DRILL parameter text file
nc_tools_auto.txt		T-Codes text file

bom_rep.rpt			Bill of Material file
net_rep.rpt			Allegro Netlist (text file)
pcp_rep.rpt			Placement File

isl95210_eval1z_b.ipc		IPC356 Netlist
isl95210_eval1z_b-1-4.drl	PC BOARD (SINGLE) NC DRILL TAPE

**********************************************************************

PDF and PS DRAWINGS:

isl95210_eval1z_b_fab.pdf	Fabrication drawing (pdf)
isl95210_eval1z_b_fab.ps	Fabrication drawing (ps)
