                ===========================================
                Read Me File for SSIF demo
                ===========================================

Created:    11.May.2026: Initial

========
Contents
========

  1. General Information 
  2. Manual Corrections and Updates
  3. Software Corrections and Updates
  4. Restrictions and Operating Precautions


======================
1. General Information 
======================
1.1 This demo code presents the usage and configuration of SSIF for I2S on RH850/U2C-Y-RH850-U2C-292PIN-PB-T1-V1. 
	TAUJ is used to provide the sampling clock to SSIF interface. SSIF Tx FIFO is filled by DTS on TDE(Transmit data empty) event. 
	For more details reffer to the accompanying document or the srouce code from this demo project.

1.2 The samples can be used along with the GHS tools for projects using the 
    gcores utility. To start, please change into the desired sample directory 
    and open MCA2.gpj project with Multi. Starting the debugger requires a 
    working target connection. Please start the script SSIF.rc
    from Multi debuggers command pane, like this:

        MULTI> <SSIF.rc

    The script will connect to the target board and guide you through the 
    debug process. These basic options are used to establish a connection:

    Core:              -rh850 
    Connection method: -e2lpd4=default 
    target clock:      -dclock=16000,0,swoff 
    Power Supply:      -t3v (Supply 3 Volt from emulator to target), or
                       -t5v to supply 5 Volt from emulator

    Sometimes, the a new emulator E2 is used. In that case, please refer to 
    actual RC- scripts provided.

=================================
2. Manual Corrections and Updates
=================================

2.1 None.

===================================
3. Software Corrections and Updates
===================================

3.1 None

===================================
4. Restrictions
===================================

=========================================
4. Restrictions and Operating Precautions
=========================================

4.1 To use the included sample project the follow environment is recommended:
     - EXEC-DLL Executor Version=RH850G4 Executor V1.00.01.05 [30 Aug 2018]
     - GHS Multi V2018.1.5 or later
     - 850eserv2 Version: V2.050 or later


In case of any question please do not hesitate to contact:

        ABG.Support
        Software Tools Support

        Renesas Electronics Europe GmbH
        Arcadiastrasse 10
        D-40472 Duesseldorf, Germany

        e-mail: sw_tool_support-eu@lm.renesas.com
        FAX:   +49 - (0)211 / 65 03 - 12 79


==================================================
End of Read Me File for Multi Core Sample Projects
==================================================
