1.0
	- Initial Release
1.10
	- Analog output calibration option for Vout/Current Loop included -> calibration tab
1.11
	- GUI layout adjustments
1.12
	- Optimization Hysteresis display in NVM tab 
1.13
	- Calibration options included for coefficient variation (when small bridge TC is used for T-measurement). It applied automatically in the DLL -> calibration tab
	- DLL changes (Temperature range : -5000..5000°C ; Variation of initial conditions for coefficients calculation)
1.14
	- Averaging raw measurement values by SW option included for calibration
	- Beta version with mass calibration support applying I2C
1.15
	- Bug fix in the DAC coefficients calculation
1.20
	- Adjusted SPI master initialization, improves SPI communication
	- MCB -> I2C
1.30
	- Current loop calibration with new mapping: digital full scale [0..2^^24-1 LSBs] -> current loop output [0..20mA]
1.31
	- DAC coefficient for current loop -> bug fix
	- Selection of MCB interface(I2C/OWI) added 
1.32
	- Variable interface speed in the MCS SW included -> Menu -> Inteface -> Setup
1.4
	- Calibration option adjusted for 5-point calibration  
	- Option added, for loading raw data from an external txt file into the calibration table 
1.41
	- Exporting option for calirbation data to txt file added
	- Bug fix in product distinction
1.42
	- Temp_source parameter configuration options relabeled -> for a better application assignment
1.43
	- Bug fix in the OWI Master Section