middleware_defaults.h

Go to the documentation of this file.

 
#ifndef MIDDLEWARE_DEFAULTS_H_
#define MIDDLEWARE_DEFAULTS_H_
 
/* -------------------------------- Adapters (ad_*) selection -------------------------------- */
 
#ifndef dg_configFLASH_ADAPTER
#define dg_configFLASH_ADAPTER                  (1)
#endif
 
#ifndef dg_configI2C_ADAPTER
#define dg_configI2C_ADAPTER                    (0)
#endif
 
#ifndef dg_configNVMS_ADAPTER
#define dg_configNVMS_ADAPTER                   (1)
#endif
 
#ifndef dg_configNVMS_FLASH_CACHE
#define dg_configNVMS_FLASH_CACHE               (0)
#endif
 
#ifndef dg_configNVMS_VES
#define dg_configNVMS_VES                       (1)
#endif
 
#ifndef dg_configSPI_ADAPTER
#define dg_configSPI_ADAPTER                    (0)
#endif
 
#ifndef dg_configUART_ADAPTER
#define dg_configUART_ADAPTER                   (0)
#endif
 
#ifndef dg_configGPADC_ADAPTER
#define dg_configGPADC_ADAPTER                  (0)
#endif
 
#ifndef dg_configSDADC_ADAPTER
#define dg_configSDADC_ADAPTER                  (0)
#endif
 
#ifdef dg_configTEMPSENS_ADAPTER
#error "Configuration option dg_configTEMPSENS_ADAPTER  is no longer supported"
#endif
 
#ifdef dg_configBATTERY_ADAPTER
#error "Configuration option dg_configBATTERY_ADAPTER  is no longer supported"
#endif
 
#ifndef dg_configNVPARAM_ADAPTER
#define dg_configNVPARAM_ADAPTER                (0)
#endif
 
#ifndef dg_configNVPARAM_APP_AREA
#define dg_configNVPARAM_APP_AREA               (0)
#endif
 
#ifndef dg_configCRYPTO_ADAPTER
#define dg_configCRYPTO_ADAPTER                 (0)
#endif
 
#if dg_configCRYPTO_ADAPTER
#if !dg_configUSE_HW_AES && !dg_configUSE_HW_HASH
#error "The Crypto adapter requires hw_aes or/and hw_hash"
#endif
#endif
 
#ifndef dg_configKEYBOARD_SCANNER_ADAPTER
#define dg_configKEYBOARD_SCANNER_ADAPTER       (0)
#endif
 
 
 
#ifndef dg_configPMU_ADAPTER
#define dg_configPMU_ADAPTER                    (1)
#endif
 
#if (dg_configISO7816_ADAPTER == 1)
# error "dg_configISO7816_ADAPTER is not supported in DA1459X devices"
#else
# undef dg_configISO7816_ADAPTER
# define dg_configISO7816_ADAPTER               (0)
#endif
 
 
/* ---------------------------------------------------------------------------------------------- */
 
/* -------------------------------------- Console IO configuration settings --------------------- */
 
#ifndef dg_configUSE_CONSOLE
#define dg_configUSE_CONSOLE                    (0)
#endif
 
#ifndef dg_configUSE_CONSOLE_STUBS
#define dg_configUSE_CONSOLE_STUBS              (0)
#endif
 
#ifndef dg_configUSE_CLI
#define dg_configUSE_CLI                        (0)
#endif
 
#ifndef dg_configUSE_CLI_STUBS
#define dg_configUSE_CLI_STUBS                  (0)
#endif
/* ---------------------------------------------------------------------------------------------- */
 
/* ----------------------------- DGTL ----------------------------------------------------------- */
 
#ifndef dg_configUSE_DGTL
#define dg_configUSE_DGTL                       (0)
#endif
 
/* -------------------------------------- Debug settings ---------------------------------------- */
 
#ifndef dg_configENABLE_TASK_MONITORING
#define dg_configENABLE_TASK_MONITORING         (0)
#endif
 
 
 
/* ---------------------------------------------------------------------------------------------- */
 
/* ---------------------------------- OS related configuration ---------------------------------- */
 
#ifndef dg_configTRACK_OS_HEAP
#define dg_configTRACK_OS_HEAP                  (0)
#endif
 
/* ---------------------------------------------------------------------------------------------- */
 
/* ---------------------------------- SYSTEM CONFIGURATION ------------------------------------ */
#if defined(OS_PRESENT)
#ifndef dg_configUSE_SYS_ADC
#define dg_configUSE_SYS_ADC                    (1)
#endif
#endif
 
#ifndef dg_configUSE_SYS_BOOT
# if defined(OS_PRESENT) && (dg_configCODE_LOCATION != NON_VOLATILE_IS_NONE)
#  define dg_configUSE_SYS_BOOT                 (1)
# else
#  define dg_configUSE_SYS_BOOT                 (0)
# endif
#endif /* dg_configUSE_SYS_BOOT */
 
#ifndef dg_configUSE_SYS_TRNG
#if defined(CONFIG_USE_BLE)
#define dg_configUSE_SYS_TRNG                           (1)
#else
#define dg_configUSE_SYS_TRNG                           (0)
#endif
#endif
 
#ifndef dg_configUSE_SYS_DRBG
#if defined(CONFIG_USE_BLE)
#define dg_configUSE_SYS_DRBG                           (1)
#else
#define dg_configUSE_SYS_DRBG                           (0)
#endif
#endif
 
#if (dg_configUSE_SYS_TRNG == 1)
# ifndef dg_configSYS_TRNG_ENTROPY_SRC_ADDR
# define dg_configSYS_TRNG_ENTROPY_SRC_ADDR     MEMORY_CMAC_CACHERAM_BASE
# endif
#endif
 
#ifndef dg_configUSE_SYS_DRBG_BUFFER_LENGTH
#define dg_configUSE_SYS_DRBG_BUFFER_LENGTH             (30)
#endif
 
#ifndef dg_configUSE_SYS_DRBG_BUFFER_THRESHOLD
#define dg_configUSE_SYS_DRBG_BUFFER_THRESHOLD          (24)
#endif
 
#if (dg_configUSE_SYS_DRBG_BUFFER_THRESHOLD >= dg_configUSE_SYS_DRBG_BUFFER_LENGTH)
#error "The threshold must be less than the buffer length"
#endif
 
#if (dg_configUSE_SYS_DRBG_BUFFER_THRESHOLD <= 0)
#error "The threshold must be greater than zero"
#endif
 
#ifndef dg_configUSE_CHACHA20_RAND
#define dg_configUSE_CHACHA20_RAND                      (1)
#endif
 
#ifndef dg_configUSE_STDLIB_RAND
#define dg_configUSE_STDLIB_RAND                        (0)
#endif
 
#if ((dg_configUSE_CHACHA20_RAND + dg_configUSE_STDLIB_RAND) != 1)
      #error "Only one random number generator must be enabled each time."
#endif
 
 
/* ---------------------------------------------------------------------------------------------- */
 
/* ----------------------------------- Driver dependencies -------------------------------------- */
 
 
#  if dg_configUSE_SYS_ADC
#   undef dg_configUSE_HW_GPADC
#   define dg_configUSE_HW_GPADC               (1)
#   undef dg_configGPADC_ADAPTER
#   define dg_configGPADC_ADAPTER              (1)
#  endif /* dg_configUSE_SYS_ADC */
 
 
 
 
/* If RF is enabled, we need to enable GPADC adapter as well */
#if  dg_configRF_ADAPTER
#undef dg_configGPADC_ADAPTER
#define dg_configGPADC_ADAPTER                  (1)
#endif
 
/*
 * \brief Enable the RTC correction mechanism
 *
 * When RCX is set as the low power clock and Real Time Clock is used (i.e. dg_configUSE_HW_RTC is defined),
 * setting this macro to a non-zero value enables the RTC correction mechanism.
 * The SYS_ADC service is required to trigger the drift compensation mechanism, correcting the RTC time.
 * The value of this macro triggers the correction every (dg_configRTC_CORRECTION * SYS_ADC_PERIOD_TICKS).
 * A drift compensation is also applied after every RCX calibration.
 *
 * \note Using the fastest available system clock is recommended to achieve high RTC accuracy.
 * This minimizes the intrinsic drift due to the correction algorithm, which is executed while the system is at wake-time.
 *
 * \note Although not mandatory, a power-of-2 value for this macro is advised.
 */
#if (dg_configUSE_LP_CLK == LP_CLK_RCX && defined(OS_FREERTOS) && dg_configUSE_HW_RTC && dg_configUSE_SYS_ADC)
#ifndef dg_configRTC_CORRECTION
#define dg_configRTC_CORRECTION                 (64)
#endif
#else
#if dg_configRTC_CORRECTION
# pragma message "dg_configRTC_CORRECTION is only used in RTOS based projects when RCX is set as low power clock. Forcing to 0."
#undef dg_configRTC_CORRECTION
#define dg_configRTC_CORRECTION                 (0)
#endif
#endif
 
#if (dg_configSPI_ADAPTER)
/*
 * \brief CS configuration limit for the SPI adapter.
 *
 * The maximum number of available pads in multiple CS configuration.
 *
 * \note Up to (UINT8_MAX - 1). UINT8_MAX is reserved
 */
#ifndef dg_configSPI_ADAPTER_CS_MAX
#define dg_configSPI_ADAPTER_CS_MAX             (8)
#endif
 
#endif
 
/*
 * If SYS_TRNG is enabled for DA1459X, is also necessary to enable the AES/HASH driver because
 * sys_trng makes use of aes ecb encryption functionality
 */
#if (dg_configUSE_SYS_TRNG == 1)
#undef  dg_configUSE_HW_AES
#define dg_configUSE_HW_AES                (1)
#endif /* dg_configUSE_SYS_TRNG */
/* ---------------------------------------------------------------------------------------------- */
 
#endif /* MIDDLEWARE_DEFAULTS_H_ */