WAKEUP registers (WAKEUP) More...

#include <DA1459x-00.h>

Data Fields
__IOM uint32_t	WKUP_CTRL_REG

__IOM uint32_t	WKUP_RESET_IRQ_REG

__IOM uint32_t	WKUP_SELECT_P0_REG

__IOM uint32_t	WKUP_SELECT_P1_REG

__IOM uint32_t	WKUP_POL_P0_REG

__IOM uint32_t	WKUP_POL_P1_REG

__IOM uint32_t	WKUP_STATUS_P0_REG

__IOM uint32_t	WKUP_STATUS_P1_REG

__IOM uint32_t	WKUP_CLEAR_P0_REG

__IOM uint32_t	WKUP_CLEAR_P1_REG

__IOM uint32_t	WKUP_SEL_GPIO_P0_REG

__IOM uint32_t	WKUP_SEL_GPIO_P1_REG

__IOM uint32_t	WKUP_SEL1_GPIO_P0_REG

__IOM uint32_t	WKUP_SEL1_GPIO_P1_REG

Detailed Description

WAKEUP registers (WAKEUP)

Field Documentation

◆ WKUP_CLEAR_P0_REG

__IOM uint32_t WAKEUP_Type::WKUP_CLEAR_P0_REG

(@ 0x00000048) Clear event register for P0

◆ WKUP_CLEAR_P1_REG

__IOM uint32_t WAKEUP_Type::WKUP_CLEAR_P1_REG

(@ 0x0000004C) Clear event register for P1

◆ WKUP_CTRL_REG

__IOM uint32_t WAKEUP_Type::WKUP_CTRL_REG

< (@ 0x50000100) WAKEUP Structure
(@ 0x00000000) Control register for the wake-up counter

◆ WKUP_POL_P0_REG

__IOM uint32_t WAKEUP_Type::WKUP_POL_P0_REG

(@ 0x00000028) Select the sensitivity polarity for each P0 input

◆ WKUP_POL_P1_REG

__IOM uint32_t WAKEUP_Type::WKUP_POL_P1_REG

(@ 0x0000002C) Select the sensitivity polarity for each P1 input

◆ WKUP_RESET_IRQ_REG

__IOM uint32_t WAKEUP_Type::WKUP_RESET_IRQ_REG

(@ 0x00000008) Reset wake-up interrupt

◆ WKUP_SEL1_GPIO_P0_REG

__IOM uint32_t WAKEUP_Type::WKUP_SEL1_GPIO_P0_REG

(@ 0x0000005C) Configure to generate level or edge sensitive IRQ on P0 events

◆ WKUP_SEL1_GPIO_P1_REG

__IOM uint32_t WAKEUP_Type::WKUP_SEL1_GPIO_P1_REG

(@ 0x00000060) Configure to generate level or edge sensitive IRQ on P1 events

◆ WKUP_SEL_GPIO_P0_REG

__IOM uint32_t WAKEUP_Type::WKUP_SEL_GPIO_P0_REG

(@ 0x00000054) Enable fast wake-up and enable GPIO_P0_IRQ

◆ WKUP_SEL_GPIO_P1_REG

__IOM uint32_t WAKEUP_Type::WKUP_SEL_GPIO_P1_REG

(@ 0x00000058) Enable fast wake-up and enable GPIO_P1_IRQ

◆ WKUP_SELECT_P0_REG

__IOM uint32_t WAKEUP_Type::WKUP_SELECT_P0_REG

(@ 0x00000014) Select which inputs from P0 port can trigger wake-up counter

◆ WKUP_SELECT_P1_REG

__IOM uint32_t WAKEUP_Type::WKUP_SELECT_P1_REG

(@ 0x00000018) Select which inputs from P1 port can trigger wake-up counter

◆ WKUP_STATUS_P0_REG

__IOM uint32_t WAKEUP_Type::WKUP_STATUS_P0_REG

(@ 0x0000003C) Event status register for P0

◆ WKUP_STATUS_P1_REG

__IOM uint32_t WAKEUP_Type::WKUP_STATUS_P1_REG

(@ 0x00000040) Event status register for P1

The documentation for this struct was generated from the following file:

sdk/bsp/include/DA1459x-00.h

Data Fields