QSPIC registers (QSPIC) More...

#include <DA1459x-00.h>

Data Fields
__IOM uint32_t	QSPIC_CTRLBUS_REG

__IOM uint32_t	QSPIC_CTRLMODE_REG

__IOM uint32_t	QSPIC_RECVDATA_REG

__IOM uint32_t	QSPIC_BURSTCMDA_REG

__IOM uint32_t	QSPIC_BURSTCMDB_REG

__IOM uint32_t	QSPIC_STATUS_REG

__IOM uint32_t	QSPIC_WRITEDATA_REG

__IOM uint32_t	QSPIC_READDATA_REG

__IOM uint32_t	QSPIC_DUMMYDATA_REG

__IOM uint32_t	QSPIC_ERASECTRL_REG

__IOM uint32_t	QSPIC_ERASECMDA_REG

__IOM uint32_t	QSPIC_ERASECMDB_REG

__IOM uint32_t	QSPIC_BURSTBRK_REG

__IOM uint32_t	QSPIC_STATUSCMD_REG

__IOM uint32_t	QSPIC_CHCKERASE_REG

__IOM uint32_t	QSPIC_GP_REG

__IOM uint32_t	QSPIC_AWRITECMD_REG

__IOM uint32_t	QSPIC_MEMBLEN_REG

Detailed Description

QSPIC registers (QSPIC)

Field Documentation

◆ QSPIC_AWRITECMD_REG

__IOM uint32_t QSPIC_Type::QSPIC_AWRITECMD_REG

(@ 0x00000040) The way of writing in Auto mode when the external device is a serial SRAM

◆ QSPIC_BURSTBRK_REG

__IOM uint32_t QSPIC_Type::QSPIC_BURSTBRK_REG

(@ 0x00000030) Read break sequence in Auto mode

◆ QSPIC_BURSTCMDA_REG

__IOM uint32_t QSPIC_Type::QSPIC_BURSTCMDA_REG

(@ 0x0000000C) The way of reading in Auto mode (command register A)

◆ QSPIC_BURSTCMDB_REG

__IOM uint32_t QSPIC_Type::QSPIC_BURSTCMDB_REG

(@ 0x00000010) The way of reading in Auto mode (command register B)

◆ QSPIC_CHCKERASE_REG

__IOM uint32_t QSPIC_Type::QSPIC_CHCKERASE_REG

(@ 0x00000038) Check erase progress in Auto mode

◆ QSPIC_CTRLBUS_REG

__IOM uint32_t QSPIC_Type::QSPIC_CTRLBUS_REG

< (@ 0x34000000) QSPIC Structure
(@ 0x00000000) SPI Bus control register for the Manual mode

◆ QSPIC_CTRLMODE_REG

__IOM uint32_t QSPIC_Type::QSPIC_CTRLMODE_REG

(@ 0x00000004) Mode control register

◆ QSPIC_DUMMYDATA_REG

__IOM uint32_t QSPIC_Type::QSPIC_DUMMYDATA_REG

(@ 0x00000020) Send dummy clocks to SPI Bus for the Manual mode

◆ QSPIC_ERASECMDA_REG

__IOM uint32_t QSPIC_Type::QSPIC_ERASECMDA_REG

(@ 0x00000028) The way of erasing in Auto mode (command register A)

◆ QSPIC_ERASECMDB_REG

__IOM uint32_t QSPIC_Type::QSPIC_ERASECMDB_REG

(@ 0x0000002C) The way of erasing in Auto mode (command register B)

◆ QSPIC_ERASECTRL_REG

__IOM uint32_t QSPIC_Type::QSPIC_ERASECTRL_REG

(@ 0x00000024) Erase control register

◆ QSPIC_GP_REG

__IOM uint32_t QSPIC_Type::QSPIC_GP_REG

(@ 0x0000003C) General purpose QSPIC register

◆ QSPIC_MEMBLEN_REG

__IOM uint32_t QSPIC_Type::QSPIC_MEMBLEN_REG

(@ 0x00000044) External memory burst length configuration

◆ QSPIC_READDATA_REG

__IOM uint32_t QSPIC_Type::QSPIC_READDATA_REG

(@ 0x0000001C) Read data from SPI Bus for the Manual mode

◆ QSPIC_RECVDATA_REG

__IOM uint32_t QSPIC_Type::QSPIC_RECVDATA_REG

(@ 0x00000008) Received data for the Manual mode

◆ QSPIC_STATUS_REG

__IOM uint32_t QSPIC_Type::QSPIC_STATUS_REG

(@ 0x00000014) The status register of the QSPI controller

◆ QSPIC_STATUSCMD_REG

__IOM uint32_t QSPIC_Type::QSPIC_STATUSCMD_REG

(@ 0x00000034) The way of reading the status of external device in Auto mode

◆ QSPIC_WRITEDATA_REG

__IOM uint32_t QSPIC_Type::QSPIC_WRITEDATA_REG

(@ 0x00000018) Write data to SPI Bus for the Manual mode

The documentation for this struct was generated from the following file:

sdk/bsp/include/DA1459x-00.h

Data Fields