IC specific macros. More...

Macros
#define	__IC_SPEC_SAFE_SNPRINTF(out_str, ...)
	A macro that defines a safe operation of sprintf. More...

#define	IS_580(dut_ic) (dut_ic == DUT_IC_DA14580)
	A macro that checks if a device is DA14580 type (GU). More...

#define	IS_70x(dut_ic)
	A macro that checks if a device is DA1470x type. More...

#define	IS_701(dut_ic) (dut_ic == DUT_IC_DA14701)
	A macro that checks if a device is DA14701 type. More...

#define	IS_705(dut_ic) (dut_ic == DUT_IC_DA14705)
	A macro that checks if a device is DA14705 type. More...

#define	IS_706(dut_ic) (dut_ic == DUT_IC_DA14706)
	A macro that checks if a device is DA14706 type. More...

#define	IS_708(dut_ic) (dut_ic == DUT_IC_DA14708)
	A macro that checks if a device is DA14708 type. More...

#define	DUT_IC_DA14580_STR "DA14580"
	DA14580 string macro. More...

#define	DUT_IC_DA14701_STR "DA14701"
	DA14701 string macro. More...

#define	DUT_IC_DA14705_STR "DA14705"
	DA14705 string macro. More...

#define	DUT_IC_DA14706_STR "DA14706"
	DA14705 string macro. More...

#define	DUT_IC_DA14708_STR "DA14708"
	DA14705 string macro. More...

#define	CFG_FW_PROD_TEST_70x "st_fw_da1470x.bin"

#define	CFG_FW_70x_FLASH_PROG "uartboot_da1470x.bin"

#define	DUT_IC_SLEEP_THRES_DA1470x 8000
	A macro that defines the DA1470x sleep threshold from cold boot. More...

#define	PULSE_IN_RX_STR "PULSE_IN_RX"
	A macro that defines the string used in XML for the XTAL trim pulse in UART RX pin. More...

#define	IC_58x_GPIO_PORT_PIN_TO_ENUM(port, pin) (port * 10 + pin)
	A macro that returns a single DA1458x GPIO value combination, as shown in _gpio_58x, for a given DA1458x GPIO port and pin. More...

#define	IC_58x_GPIO_ENUM_TO_PORT(enum_val) ((int)floor((double)enum_val / 10))
	A macro that returns the port from a DA1458x GPIO port/pin combination, as shown in _gpio_58x. More...

#define	IC_58x_GPIO_ENUM_TO_PIN(enum_val) (enum_val % 10)
	A macro that returns the pin from a DA1458x GPIO port/pin combination, as shown in _gpio_58x. More...

#define	IC_58x_GPIO_VALID(val)
	A macro that checks if a GPIO is valid for DA1458x device ICs. More...

#define	IC_58x_GPIO_W_OPTS_VALID(val)
	A macro that checks if a GPIO is valid for DA1458x device ICs. More...

#define	GPIO_OFFSET_70x_PORT1 0x20
	A macro that defines the DA1470x GPIO offset for Port 1. More...

#define	GPIO_OFFSET_70x_PORT2 0x40
	A macro that defines the DA1470x GPIO offset for Port 2. More...

#define	IC_70x_GPIO_PORT_PIN_TO_ENUM(port, pin) (port * GPIO_OFFSET_70x_PORT1 + pin)
	A macro that returns a single DA1470x GPIO value combination, as shown in _gpio_70x, for a given GPIO port and pin. More...

#define	IC_70x_GPIO_ENUM_TO_PORT(enum_val) ((int)floor((double)enum_val / GPIO_OFFSET_70x_PORT1))
	A macro that returns the port from a DA1469x GPIO port/pin combination, as shown in _gpio_70x. More...

#define	IC_70x_GPIO_ENUM_TO_PIN(enum_val) (enum_val % GPIO_OFFSET_70x_PORT1)
	A macro that returns the pin from a DA1470x GPIO port/pin combination, as shown in _gpio_70x. More...

#define	IC_70x_GPIO_IS_LED(enum_val)
	A macro that checks if a DA1470x GPIO of type _gpio_70x is an LED GPIO. More...

#define	IC_70x_GPIO_VALID(val)
	A macro that checks if a GPIO is valid for DA1470x ICs. More...

#define	IC_70x_GPIO_W_OPTS_VALID(val)
	A macro that checks if a GPIO is valid for DA1470x ICs. More...

#define	IC_GPIO_ENUM_TO_PORT(dut_ic, val)
	A macro that returns the port from a GPIO port/pin combination, for a given DUT IC. More...

#define	IC_GPIO_ENUM_TO_PIN(dut_ic, val)
	A macro that returns the pin from a GPIO port/pin combination, for a given DUT IC. More...

Detailed Description

IC specific macros.

Macro Definition Documentation

◆ __IC_SPEC_SAFE_SNPRINTF

#define __IC_SPEC_SAFE_SNPRINTF	(	out_str,
		...
	)

Value:

{ \
    out_str[0] = '\0'; \
    _snprintf_s(out_str, sizeof(out_str), _TRUNCATE, __VA_ARGS__); \
}

A macro that defines a safe operation of sprintf.

Parameters

out_str	The output string.
...	Variable arguments providing additional information.

Definition at line 59 of file ic_specifics.h.

◆ CFG_FW_70x_FLASH_PROG

#define CFG_FW_70x_FLASH_PROG "uartboot_da1470x.bin"

Definition at line 130 of file ic_specifics.h.

◆ CFG_FW_PROD_TEST_70x

#define CFG_FW_PROD_TEST_70x "st_fw_da1470x.bin"

Definition at line 125 of file ic_specifics.h.

◆ DUT_IC_DA14580_STR

#define DUT_IC_DA14580_STR "DA14580"

DA14580 string macro.

Definition at line 111 of file ic_specifics.h.

◆ DUT_IC_DA14701_STR

#define DUT_IC_DA14701_STR "DA14701"

DA14701 string macro.

Definition at line 113 of file ic_specifics.h.

◆ DUT_IC_DA14705_STR

#define DUT_IC_DA14705_STR "DA14705"

DA14705 string macro.

Definition at line 115 of file ic_specifics.h.

◆ DUT_IC_DA14706_STR

#define DUT_IC_DA14706_STR "DA14706"

DA14705 string macro.

Definition at line 117 of file ic_specifics.h.

◆ DUT_IC_DA14708_STR

#define DUT_IC_DA14708_STR "DA14708"

DA14705 string macro.

Definition at line 119 of file ic_specifics.h.

◆ DUT_IC_SLEEP_THRES_DA1470x

#define DUT_IC_SLEEP_THRES_DA1470x 8000

A macro that defines the DA1470x sleep threshold from cold boot.

Definition at line 133 of file ic_specifics.h.

◆ GPIO_OFFSET_70x_PORT1

#define GPIO_OFFSET_70x_PORT1 0x20

A macro that defines the DA1470x GPIO offset for Port 1.

Definition at line 186 of file ic_specifics.h.

◆ GPIO_OFFSET_70x_PORT2

#define GPIO_OFFSET_70x_PORT2 0x40

A macro that defines the DA1470x GPIO offset for Port 2.

Definition at line 189 of file ic_specifics.h.

◆ IC_58x_GPIO_ENUM_TO_PIN

#define IC_58x_GPIO_ENUM_TO_PIN ( enum_val ) (enum_val % 10)

A macro that returns the pin from a DA1458x GPIO port/pin combination, as shown in _gpio_58x.

Parameters

enum_val The GPIO port and pin combination.

Definition at line 162 of file ic_specifics.h.

◆ IC_58x_GPIO_ENUM_TO_PORT

#define IC_58x_GPIO_ENUM_TO_PORT ( enum_val ) ((int)floor((double)enum_val / 10))

A macro that returns the port from a DA1458x GPIO port/pin combination, as shown in _gpio_58x.

Parameters

enum_val The GPIO port and pin combination.

Definition at line 154 of file ic_specifics.h.

◆ IC_58x_GPIO_PORT_PIN_TO_ENUM

#define IC_58x_GPIO_PORT_PIN_TO_ENUM	(	port,
		pin
	)	(port * 10 + pin)

A macro that returns a single DA1458x GPIO value combination, as shown in _gpio_58x, for a given DA1458x GPIO port and pin.

Parameters

port	The GPIO port.
pin	The GPIO pin.

Definition at line 146 of file ic_specifics.h.

◆ IC_58x_GPIO_VALID

#define IC_58x_GPIO_VALID ( val )

Value:

    (((val >= IC_58x_P0_0) && (val <= IC_58x_P0_7)) || \
    ((val >= IC_58x_P1_0) && (val <= IC_58x_P1_7)) || \
    ((val >= IC_58x_P2_0) && (val <= IC_58x_P2_9)) || \
    ((val >= IC_58x_P3_0) && (val <= IC_58x_P3_7)) )

A macro that checks if a GPIO is valid for DA1458x device ICs.

Parameters

val	The GPIO to check.

Definition at line 169 of file ic_specifics.h.

◆ IC_58x_GPIO_W_OPTS_VALID

#define IC_58x_GPIO_W_OPTS_VALID ( val )

Value:

(IC_58x_GPIO_VALID(val) || \

(val == IC_58x_PULSE_IN_RX))

IC_58x_GPIO_VALID

#define IC_58x_GPIO_VALID(val)

A macro that checks if a GPIO is valid for DA1458x device ICs.

Definition: ic_specifics.h:169

A macro that checks if a GPIO is valid for DA1458x device ICs.

Parameters

val	The GPIO to check.

Definition at line 180 of file ic_specifics.h.

◆ IC_70x_GPIO_ENUM_TO_PIN

#define IC_70x_GPIO_ENUM_TO_PIN ( enum_val ) (enum_val % GPIO_OFFSET_70x_PORT1)

A macro that returns the pin from a DA1470x GPIO port/pin combination, as shown in _gpio_70x.

Parameters

enum_val The DA1470x GPIO port and pin combination.

Definition at line 216 of file ic_specifics.h.

◆ IC_70x_GPIO_ENUM_TO_PORT

#define IC_70x_GPIO_ENUM_TO_PORT ( enum_val ) ((int)floor((double)enum_val / GPIO_OFFSET_70x_PORT1))

A macro that returns the port from a DA1469x GPIO port/pin combination, as shown in _gpio_70x.

Parameters

enum_val The DA1469x GPIO port and pin combination.

Definition at line 207 of file ic_specifics.h.

◆ IC_70x_GPIO_IS_LED

#define IC_70x_GPIO_IS_LED ( enum_val )

Value:

    ((enum_val == IC_70x_LED1) || \
    (enum_val == IC_70x_LED2) || \
    (enum_val == IC_70x_LED3))

A macro that checks if a DA1470x GPIO of type _gpio_70x is an LED GPIO.

Parameters

enum_val The DA1468x GPIO value of type _gpio_70x.

Definition at line 225 of file ic_specifics.h.

◆ IC_70x_GPIO_PORT_PIN_TO_ENUM

#define IC_70x_GPIO_PORT_PIN_TO_ENUM	(	port,
		pin
	)	(port * GPIO_OFFSET_70x_PORT1 + pin)

A macro that returns a single DA1470x GPIO value combination, as shown in _gpio_70x, for a given GPIO port and pin.

Parameters

port	The GPIO port.
pin	The GPIO pin.

Definition at line 198 of file ic_specifics.h.

◆ IC_70x_GPIO_VALID

#define IC_70x_GPIO_VALID ( val )

Value:

    (((val >= IC_70x_P0_0) && (val <= IC_70x_P0_31)) || \
        ((val >= IC_70x_P1_0) && (val <= IC_70x_P1_31)) || \
        ((val >= IC_70x_P2_0) && (val <= IC_70x_P2_15)))

A macro that checks if a GPIO is valid for DA1470x ICs.

Parameters

val	The GPIO to check.

Definition at line 235 of file ic_specifics.h.

◆ IC_70x_GPIO_W_OPTS_VALID

#define IC_70x_GPIO_W_OPTS_VALID ( val )

Value:

    (IC_70x_GPIO_VALID(val) || \
    (val == IC_70x_LED1) || \
    (val == IC_70x_LED2) || \
    (val == IC_70x_LED3) || \
    (val == IC_70x_PULSE_IN_RX))

A macro that checks if a GPIO is valid for DA1470x ICs.

Parameters

val	The GPIO to check.

Definition at line 245 of file ic_specifics.h.

◆ IC_GPIO_ENUM_TO_PIN

#define IC_GPIO_ENUM_TO_PIN	(	dut_ic,
		val
	)

Value:

( (uint8_t) (IS_70x(dut_ic) ? IC_70x_GPIO_ENUM_TO_PIN(val) : \

0xFF))

IS_70x

#define IS_70x(dut_ic)

A macro that checks if a device is DA1470x type.

Definition: ic_specifics.h:77

IC_70x_GPIO_ENUM_TO_PIN

#define IC_70x_GPIO_ENUM_TO_PIN(enum_val)

A macro that returns the pin from a DA1470x GPIO port/pin combination, as shown in _gpio_70x.

Definition: ic_specifics.h:216

A macro that returns the pin from a GPIO port/pin combination, for a given DUT IC.

Parameters

dut_ic	The DUT IC.
val	The GPIO port/pin combination.

Definition at line 270 of file ic_specifics.h.

◆ IC_GPIO_ENUM_TO_PORT

#define IC_GPIO_ENUM_TO_PORT	(	dut_ic,
		val
	)

Value:

((uint8_t) (IS_70x(dut_ic) ? IC_70x_GPIO_ENUM_TO_PORT(val) : \

0xFF))

IC_70x_GPIO_ENUM_TO_PORT

#define IC_70x_GPIO_ENUM_TO_PORT(enum_val)

A macro that returns the port from a DA1469x GPIO port/pin combination, as shown in _gpio_70x.

Definition: ic_specifics.h:207

A macro that returns the port from a GPIO port/pin combination, for a given DUT IC.

Parameters

dut_ic	The DUT IC.
val	The GPIO port/pin combination.

Definition at line 259 of file ic_specifics.h.

◆ IS_580

#define IS_580 ( dut_ic ) (dut_ic == DUT_IC_DA14580)

A macro that checks if a device is DA14580 type (GU).

Parameters

dut_ic The device IC input parameter.

Definition at line 70 of file ic_specifics.h.

◆ IS_701

#define IS_701 ( dut_ic ) (dut_ic == DUT_IC_DA14701)

A macro that checks if a device is DA14701 type.

Parameters

dut_ic The device IC input parameter.

Definition at line 87 of file ic_specifics.h.

◆ IS_705

#define IS_705 ( dut_ic ) (dut_ic == DUT_IC_DA14705)

A macro that checks if a device is DA14705 type.

Parameters

dut_ic The device IC input parameter.

Definition at line 94 of file ic_specifics.h.

◆ IS_706

#define IS_706 ( dut_ic ) (dut_ic == DUT_IC_DA14706)

A macro that checks if a device is DA14706 type.

Parameters

dut_ic The device IC input parameter.

Definition at line 101 of file ic_specifics.h.

◆ IS_708

#define IS_708 ( dut_ic ) (dut_ic == DUT_IC_DA14708)

A macro that checks if a device is DA14708 type.

Parameters

dut_ic The device IC input parameter.

Definition at line 108 of file ic_specifics.h.

◆ IS_70x

#define IS_70x ( dut_ic )

Value:

                        ((dut_ic == DUT_IC_DA14701) |\
                        (dut_ic == DUT_IC_DA14705) |\
                        (dut_ic == DUT_IC_DA14706) |\
                        (dut_ic == DUT_IC_DA14708))

A macro that checks if a device is DA1470x type.

Parameters

dut_ic The device IC input parameter.

Definition at line 77 of file ic_specifics.h.

◆ PULSE_IN_RX_STR

#define PULSE_IN_RX_STR "PULSE_IN_RX"

A macro that defines the string used in XML for the XTAL trim pulse in UART RX pin.

Definition at line 137 of file ic_specifics.h.

Macros

Detailed Description

Macro Definition Documentation

◆ __IC_SPEC_SAFE_SNPRINTF

◆ CFG_FW_70x_FLASH_PROG

◆ CFG_FW_PROD_TEST_70x

◆ DUT_IC_DA14580_STR

◆ DUT_IC_DA14701_STR

◆ DUT_IC_DA14705_STR

◆ DUT_IC_DA14706_STR

◆ DUT_IC_DA14708_STR

◆ DUT_IC_SLEEP_THRES_DA1470x

◆ GPIO_OFFSET_70x_PORT1

◆ GPIO_OFFSET_70x_PORT2

◆ IC_58x_GPIO_ENUM_TO_PIN

◆ IC_58x_GPIO_ENUM_TO_PORT

◆ IC_58x_GPIO_PORT_PIN_TO_ENUM

◆ IC_58x_GPIO_VALID

◆ IC_58x_GPIO_W_OPTS_VALID

◆ IC_70x_GPIO_ENUM_TO_PIN

◆ IC_70x_GPIO_ENUM_TO_PORT

◆ IC_70x_GPIO_IS_LED

◆ IC_70x_GPIO_PORT_PIN_TO_ENUM

◆ IC_70x_GPIO_VALID

◆ IC_70x_GPIO_W_OPTS_VALID

◆ IC_GPIO_ENUM_TO_PIN

◆ IC_GPIO_ENUM_TO_PORT

◆ IS_580

◆ IS_701

◆ IS_705

◆ IS_706

◆ IS_708

◆ IS_70x

◆ PULSE_IN_RX_STR