Top level production test flow process DLL. More...

#include <stdint.h>
#include "p_dll.h"
#include "u_dll.h"
#include "dbg_dll.h"

Classes
struct	__pltd_dbg_params
	PLTD debug settings. More...

struct	__pltd_dut_results
	Holds the DUTs, GU and instrument callback status codes. Used at __pltd_general_params::user_callback_pltd function return parameter. More...

struct	__pltd_versions
	Holds the versions of the various firmwares and DLLs used in the Production Line Tool. More...

struct	__clbk_data_array
	Holds all the data retrieved from callback for each DUT. More...

struct	__pltd_dev_params
	PLTD library parameters for each different device. More...

struct	__plt_log_info
	PLTD library parameters for each different device. More...

struct	__pltd_ble_tester
	BLE tester instrument specific settings. More...

struct	__pltd_ble_test_tx_pwr
	BLE tester measurement settings for TX power measurements common to all DUTs. More...

struct	__pltd_ble_test_freq_offs
	BLE tester measurement settings for TX frequency offset measurements common to all DUTs. More...

struct	__pltd_ble_test_mod_idx
	BLE tester measurement settings for the TX modulation index measurements common to all DUTs. More...

struct	__pltd_ble_test_rx_sens
	BLE tester measurement settings for the RX sensitivity measurements common to all DUTs. More...

struct	__pltd_temp_meas
	Temperature measurement settings. More...

struct	__pltd_ammeter
	Ammeter instrument general settings. More...

struct	__pltd_ammeter_params
	Ammeter test settings and limits for testing current. More...

struct	__pltd_gpio_led_test
	GPIO/LED test settings. More...

struct	__pltd_gpio_connection_test
	GPIO connection test settings. Sets the level of a GPIO and gets the level on another GPIO. More...

struct	__pltd_gpio_watchdog
	GPIO watchdog period toggle settings. Continuously toggles a DUT GPIO (not during test firmware download). More...

struct	__pltd_custom_test
	Custom test settings. More...

struct	__pltd_adc_vbat_test
	ADC VBAT measurement settings. More...

struct	__pltd_timestamp_rd
	Timestamp read settings. More...

struct	__pltd_periph_test
	Peripheral test (LEDs, buzzer, etc.) using current measurements. More...

struct	__pltd_ext32Khz_test
	External 32KHz test settings. More...

struct	__pltd_xtal_trim
	XTAL trim calibration test settings. More...

struct	__pltd_ble_scan
	PLTD BLE scan configuration parameters. More...

struct	__pltd_ble_hci_scan
	PLTD Configuration parameters of the BLE scan DUT HCI advertisements during production tests. More...

struct	__pltd_rssi_test
	RF RSSI test parameters, performed using the Golden Unit. More...

struct	__pltd_uart_test
	UART loopback test parameters used in DUT to PC UART connection test. More...

struct	__pltd_test_params
	PLTD library production test parameters for all devices under test. More...

struct	__pltd_mem_params
	PLTD library memory parameters for all devices under test. More...

struct	__pltd_ic_params
	PLTD IC specific general parameters for all devices under test. More...

union	__pltd_params
	PLTD library union containing parameters for all devices under test. More...

struct	__pltd_general_params
	PLTD library general parameters for all devices under test. More...

Macros
#define	__bool_true_false_are_defined 1

#define	bool char

#define	true 1

#define	false 0

#define	PLTD_EXPORTS

#define	PLTD_API __declspec(dllexport)

#define	PLTD_MAX_DEVICES 16

#define	LOG_PARAM_STR_SIZE 32

#define	PLTD_CLBK_DATA_SIZE UDLL_CLBK_DATA_SIZE

#define	MAX_SUPPORTED_FLASH_ER_TESTS 10

#define	MAX_SUPPORTED_FLASH_WR_TESTS 10

#define	MAX_SUPPORTED_FLASH_CHK_TESTS 10

#define	MAX_SUPPORTED_MEM_RD_TESTS 10

#define	MAX_SUPPORTED_RF_TESTS 10

#define	MAX_SUPPORTED_PERIPH_TESTS 10

#define	MAX_SUPPORTED_GPIO_TESTS 10

#define	MAX_SUPPORTED_GPIO_CONN_TESTS 20

#define	MAX_SUPPORTED_BLE_TESTS 10

#define	MAX_SUPPORTED_CUR_TESTS 10

#define	MAX_SUPPORTED_SENS_TESTS 10

#define	MAX_SUPPORTED_CUSTOM_TESTS 10

#define	PLTD_INSTR_MAX_NAME_SIZE 256

#define	PLTD_INSTR_MAX_STR_SIZE 256

#define	PLTD_SUCCESS 0

#define	PLTD_ERROR 1

#define	PLTD_ALL_DUTS_FAILED 2

#define	PLTD_WRONG_DEV_PARAMS 3

#define	PLTD_WRONG_GEN_PARAMS 4

#define	PLTD_DBG_ERROR 5

#define	PLTD_INSTR_ERROR 6

Typedefs
typedef enum __DUT_RES	_DUT_RES
	These are the callback status codes for the DUTs.

typedef enum __GU_RES	_GU_RES
	These are the callback status codes for the GU.

typedef enum __INSTR_RES	_INSTR_RES
	These are the callback status codes for the instruments (Ammeter, BLE tester, thermometer).

typedef enum __DUT_NUM	_DUT_NUM
	Enumeration used to set the device numbering at __pltd_dev_params::dut_num.

typedef enum __periph_test_type	_periph_test_type
	Enumeration used to set the test type at __pltd_periph_test::test_type.

typedef struct __pltd_dbg_params	_pltd_dbg_params
	PLTD debug settings.

typedef struct __pltd_dut_results	_pltd_dut_results
	Holds the DUTs, GU and instrument callback status codes. Used at __pltd_general_params::user_callback_pltd function return parameter.

typedef struct __pltd_versions	_pltd_versions
	Holds the versions of the various firmwares and DLLs used in the Production Line Tool.

typedef struct __clbk_data_array	_clbk_data_array
	Holds all the data retrieved from callback for each DUT.

typedef void(_stdcall *	_user_callback_pltd) (_pltd_dut_results *pltd_dut_results_t)
	PLTD API callback function type definition. Used at __pltd_general_params::user_callback_pltd. More...

typedef struct __pltd_dev_params	_pltd_dev_params
	PLTD library parameters for each different device.

typedef struct __plt_log_info	_plt_log_info
	PLTD library parameters for each different device.

typedef struct __pltd_ble_tester	_pltd_ble_tester
	BLE tester instrument specific settings.

typedef struct __pltd_ble_test_tx_pwr	_pltd_ble_test_tx_pwr
	BLE tester measurement settings for TX power measurements common to all DUTs.

typedef struct __pltd_ble_test_freq_offs	_pltd_ble_test_freq_offs
	BLE tester measurement settings for TX frequency offset measurements common to all DUTs.

typedef struct __pltd_ble_test_mod_idx	_pltd_ble_test_mod_idx
	BLE tester measurement settings for the TX modulation index measurements common to all DUTs.

typedef struct __pltd_ble_test_rx_sens	_pltd_ble_test_rx_sens
	BLE tester measurement settings for the RX sensitivity measurements common to all DUTs.

typedef struct __pltd_temp_meas	_pltd_temp_meas
	Temperature measurement settings.

typedef struct __pltd_ammeter	_pltd_ammeter
	Ammeter instrument general settings.

typedef struct __pltd_ammeter_params	_pltd_ammeter_params
	Ammeter test settings and limits for testing current.

typedef struct __pltd_gpio_led_test	_pltd_gpio_led_test
	GPIO/LED test settings.

typedef struct __pltd_gpio_connection_test	_pltd_gpio_connection_test
	GPIO connection test settings. Sets the level of a GPIO and gets the level on another GPIO.

typedef struct __pltd_gpio_watchdog	_pltd_gpio_watchdog
	GPIO watchdog period toggle settings. Continuously toggles a DUT GPIO (not during test firmware download).

typedef struct __pltd_custom_test	_pltd_custom_test
	Custom test settings.

typedef struct __pltd_adc_vbat_test	_pltd_adc_vbat_test
	ADC VBAT measurement settings.

typedef struct __pltd_timestamp_rd	_pltd_timestamp_rd
	Timestamp read settings.

typedef struct __pltd_periph_test	_pltd_periph_test
	Peripheral test (LEDs, buzzer, etc.) using current measurements.

typedef struct __pltd_ext32Khz_test	_pltd_ext32Khz_test
	External 32KHz test settings.

typedef struct __pltd_xtal_trim	_pltd_xtal_trim
	XTAL trim calibration test settings.

typedef struct __pltd_ble_scan	_pltd_ble_scan
	PLTD BLE scan configuration parameters.

typedef struct __pltd_ble_hci_scan	_pltd_ble_hci_scan
	PLTD Configuration parameters of the BLE scan DUT HCI advertisements during production tests.

typedef struct __pltd_rssi_test	_pltd_rssi_test
	RF RSSI test parameters, performed using the Golden Unit.

typedef struct __pltd_uart_test	_pltd_uart_test
	UART loopback test parameters used in DUT to PC UART connection test.

typedef struct __pltd_test_params	_pltd_test_params
	PLTD library production test parameters for all devices under test.

typedef struct __pltd_mem_params	_pltd_mem_params
	PLTD library memory parameters for all devices under test.

typedef struct __pltd_ic_params	_pltd_ic_params
	PLTD IC specific general parameters for all devices under test.

typedef union __pltd_params	_pltd_params
	PLTD library union containing parameters for all devices under test.

typedef struct __pltd_general_params	_pltd_general_params
	PLTD library general parameters for all devices under test.

Enumerations
enum	__DUT_RES { DUT_NOT_ACTIVE = 0 , DUT_INTERNAL_SYSTEM_ERROR , DUT_COM_PORT_IDENTIFY_STARTED , DUT_COM_PORT_IDENTIFY_OK , DUT_COM_PORT_IDENTIFY_FAILED , DUT_TEMPERATURE_MEASUREMENT_INIT , DUT_TEMPERATURE_MEASUREMENT_OK , DUT_TEMPERATURE_MEASUREMENT_ERROR , DUT_UDLL_FW_DOWNLOAD_INIT , DUT_UDLL_FW_DOWNLOAD_STARTED , DUT_UDLL_FW_DOWNLOAD_RETRY , DUT_UDLL_FW_DOWNLOAD_OK , DUT_UDLL_FW_DOWNLOAD_FAILED , DUT_UDLL_FW_VER_GET_INIT , DUT_UDLL_FW_VER_GET_STARTED , DUT_UDLL_FW_VER_GET_OK , DUT_UDLL_FW_VER_GET_FAILED , DUT_UDLL_GPIO_WD_INIT , DUT_UDLL_GPIO_WD_STARTED , DUT_UDLL_GPIO_WD_OK , DUT_UDLL_GPIO_WD_FAILED , DUT_UDLL_RAM_FW_DOWNLOAD_INIT , DUT_UDLL_RAM_FW_DOWNLOAD_STARTED , DUT_UDLL_RAM_FW_DOWNLOAD_OK , DUT_UDLL_RAM_FW_DOWNLOAD_FAILED , DUT_PDLL_NO_ERROR , DUT_PDLL_PARAMS_ERROR , DUT_PDLL_RX_TIMEOUT , DUT_PDLL_TX_TIMEOUT , DUT_PDLL_UNEXPECTED_EVENT , DUT_PDLL_CANNOT_ALLOCATE_MEMORY , DUT_PDLL_INTERNAL_ERROR , DUT_PDLL_THREAD_CREATION_ERROR , DUT_PDLL_INVALID_DBG_PARAMS , DUT_PDLL_DBG_DLL_ERROR , DUT_PDLL_COM_PORT_INIT , DUT_PDLL_COM_PORT_START , DUT_PDLL_COM_PORT_OK , DUT_PDLL_COM_PORT_FAILED , DUT_PDLL_FW_VERSION_GET_START , DUT_PDLL_FW_VERSION_GET_OK , DUT_PDLL_FW_VERSION_GET_FAILED , DUT_PDLL_GPIO_WD_INIT , DUT_PDLL_GPIO_WD_START , DUT_PDLL_GPIO_WD_OK , DUT_PDLL_GPIO_WD_FAILED , DUT_PDLL_TIMESTAMP_RD_INIT , DUT_PDLL_TIMESTAMP_RD_START , DUT_PDLL_TIMESTAMP_RD_OK , DUT_PDLL_TIMESTAMP_RD_FAILED , DUT_PDLL_ADC_VBAT_INIT , DUT_PDLL_ADC_VBAT_START , DUT_PDLL_ADC_VBAT_OK , DUT_PDLL_ADC_VBAT_FAILED , DUT_PDLL_SET_TX_PWR_INIT , DUT_PDLL_SET_TX_PWR_START , DUT_PDLL_SET_TX_PWR_OK , DUT_PDLL_SET_TX_PWR_FAILED , DUT_PDLL_XTAL_TRIM_INIT , DUT_PDLL_XTAL_TRIM_START , DUT_PDLL_XTAL_TRIM_OK , DUT_PDLL_XTAL_TRIM_OUT_OF_RANGE , DUT_PDLL_XTAL_TRIM_FREQ_CAL_NOT_CONNECTED , DUT_PDLL_XTAL_TRIM_WRITE_FAILED , DUT_PDLL_XTAL_TRIM_FAILED , DUT_PDLL_XTAL_TRIM_READ_INIT , DUT_PDLL_XTAL_TRIM_READ_START , DUT_PDLL_XTAL_TRIM_READ_OK , DUT_PDLL_XTAL_TRIM_READ_FAILED , DUT_PDLL_UART_RESYNC_INIT , DUT_PDLL_UART_RESYNC_START , DUT_PDLL_UART_RESYNC_OK , DUT_PDLL_UART_RESYNC_FAILED , DUT_PDLL_BLE_HCI_ADV_START_INIT , DUT_PDLL_BLE_HCI_ADV_START , DUT_PDLL_BLE_HCI_ADV_START_OK , DUT_PDLL_BLE_HCI_ADV_START_FAILED , DUT_PDLL_BLE_HCI_ADV_STOP_INIT , DUT_PDLL_BLE_HCI_ADV_STOP_START , DUT_PDLL_BLE_HCI_ADV_STOPPED_OK , DUT_PDLL_BLE_HCI_ADV_STOP_FAILED , DUT_PDLL_BLE_HCI_ADV_SCAN_START , DUT_PDLL_BLE_HCI_ADV_NOT_YET_FOUND , DUT_PDLL_BLE_HCI_ADV_FOUND , DUT_PDLL_BLE_HCI_ADV_RSSI_FAILED , DUT_PDLL_BLE_HCI_ADV_FAILED , DUT_PDLL_PKT_TX_START_INIT , DUT_PDLL_PKT_TX_START , DUT_PDLL_PKT_TX_STARTED_OK , DUT_PDLL_PKT_TX_STARTED_FAILED , DUT_PDLL_PKT_TX_ENDED_START , DUT_PDLL_PKT_TX_ENDED_OK , DUT_PDLL_PKT_TX_ENDED_FAILED , DUT_BLE_TESTER_TX_PWR_PASSED , DUT_BLE_TESTER_TX_PWR_FAILED , DUT_BLE_TESTER_TX_OFFS_PASSED , DUT_BLE_TESTER_TX_OFFS_FAILED , DUT_BLE_TESTER_TX_MOD_IDX_PASSED , DUT_BLE_TESTER_TX_MOD_IDX_FAILED , DUT_PDLL_PKT_RX_STATS_START_INIT , DUT_PDLL_PKT_RX_STATS_START , DUT_PDLL_PKT_RX_STATS_STARTED_OK , DUT_PDLL_PKT_RX_STATS_START_FAILED , DUT_PDLL_PKT_RX_STATS_STOP_INIT , DUT_PDLL_PKT_RX_STATS_STOP_START , DUT_PDLL_PKT_RX_STATS_STOPPED_OK , DUT_PDLL_PKT_RX_STATS_STOP_FAILED , DUT_BLE_TESTER_RX_TEST_PASSED , DUT_BLE_TESTER_RX_TEST_FAILED , DUT_PDLL_HCI_STANDARD_ERROR , DUT_PDLL_GU_RF_RX_TEST_PASSED , DUT_PDLL_GU_RF_RX_TEST_FAILED , DUT_PDLL_GPIO_TOGGLE_INIT , DUT_PDLL_GPIO_TOGGLE_START , DUT_PDLL_GPIO_TOGGLE_FINISHED_OK , DUT_PDLL_GPIO_TOGGLE_ERROR , DUT_PDLL_GPIO_TOGGLE_FAILED , DUT_PDLL_GPIO_TOGGLE_PASSED , DUT_PDLL_GPIO_CONNECTION_INIT , DUT_PDLL_GPIO_SET_START , DUT_PDLL_GPIO_SET_ERROR , DUT_PDLL_GPIO_SET_FINISHED_OK , DUT_PDLL_GPIO_GET_START , DUT_PDLL_GPIO_GET_ERROR , DUT_PDLL_GPIO_GET_FINISHED_OK , DUT_PDLL_GPIO_CONNECTION_ERROR , DUT_PDLL_GPIO_CONNECTION_FAILED , DUT_PDLL_GPIO_CONNECTION_PASSED , DUT_PDLL_SENSOR_TEST_INIT , DUT_PDLL_SENSOR_TEST_START , DUT_PDLL_SENSOR_TEST_OK , DUT_PDLL_SENSOR_TEST_FAILED , DUT_PDLL_SENSOR_TEST_DATA_MATCH_OK , DUT_PDLL_SENSOR_TEST_DATA_MATCH_FAILED , DUT_PDLL_CUSTOM_ACTION_INIT , DUT_PDLL_CUSTOM_ACTION_START , DUT_PDLL_CUSTOM_ACTION_OK , DUT_PDLL_CUSTOM_ACTION_FAILED , DUT_PDLL_CUSTOM_ACTION_DATA_MATCH_OK , DUT_PDLL_CUSTOM_ACTION_DATA_MATCH_FAILED , DUT_PDLL_UART_LOOP_INIT , DUT_PDLL_UART_LOOP_START , DUT_PDLL_UART_LOOP_OK , DUT_PDLL_UART_LOOP_FAILED , DUT_SLEEP_CURRENT_MEASURE_INIT , DUT_SLEEP_CURRENT_MEASURE_START , DUT_SLEEP_DEVICE_SLEPT_OK , DUT_SLEEP_CURRENT_MEASURE_ERROR , DUT_SLEEP_CURRENT_MEASURE_PASSED , DUT_SLEEP_CURRENT_MEASURE_FAILED , DUT_PDLL_EXT32KHz_TEST_INIT , DUT_PDLL_EXT32KHz_TEST_START , DUT_PDLL_EXT32KHz_TEST_OK , DUT_PDLL_EXT32KHz_TEST_FAILED , DUT_PDLL_PERIPH_AMMETER_TEST_INIT , DUT_PDLL_PERIPH_AMMETER_TEST_START , DUT_PDLL_PERIPH_AMMETER_TEST_ERROR , DUT_PDLL_PERIPH_AMMETER_TEST_PASSED , DUT_PDLL_PERIPH_AMMETER_TEST_FAILED , DUT_UDLL_SUCCESS , DUT_UDLL_ACTION_RESPONSE_ERROR , DUT_UDLL_UART_RX_TIMEOUT_ERROR , DUT_UDLL_NO_CRC_MATCH_ERROR , DUT_UDLL_PROG_PARAMS_ERROR , DUT_UDLL_DEVICE_PARAMS_ERROR , DUT_UDLL_UART_WRITE_ERROR , DUT_UDLL_UART_READ_ERROR , DUT_UDLL_INTERNAL_ERROR , DUT_UDLL_COM_PORT_INIT_ERROR , DUT_UDLL_COM_PORT_ERROR , DUT_UDLL_CANNOT_ALLOCATE_MEMORY , DUT_UDLL_READ_FILE_SIZE_ERROR , DUT_UDLL_CANNOT_OPEN_FW_FILE , DUT_UDLL_CANNOT_OPEN_IMAGE_FILE , DUT_UDLL_UART_PINS_PATCH_ERROR , DUT_UDLL_INVALID_DBG_PARAMS , DUT_UDLL_DBG_DLL_ERROR , DUT_UDLL_FLASH_INIT_INIT , DUT_UDLL_FLASH_INIT_STARTED , DUT_UDLL_FLASH_INIT_OK , DUT_UDLL_FLASH_INIT_FAILED , DUT_UDLL_FLASH_ERASE_INIT , DUT_UDLL_FLASH_ERASE_STARTED , DUT_UDLL_FLASH_ERASE_OK , DUT_UDLL_FLASH_ERASE_FAILED , DUT_UDLL_FLASH_IMG_WR_INIT , DUT_UDLL_FLASH_IMG_WR_STARTED , DUT_UDLL_FLASH_IMG_WR_OK , DUT_UDLL_FLASH_IMG_WR_FAILED , DUT_UDLL_OTP_CHECK_EMPTY_INIT , DUT_UDLL_OTP_CHECK_EMPTY_STARTED , DUT_UDLL_OTP_CHECK_EMPTY_STATUS , DUT_UDLL_OTP_CHECK_EMPTY_OK , DUT_UDLL_OTP_CHECK_INPUT_DATA_EMPTY_OK , DUT_UDLL_OTP_CHECK_SAME_DATA_OK , DUT_UDLL_OTP_CHECK_SKIP_IF_WRITTEN_OK , DUT_UDLL_OTP_CHECK_DIFFERENT_DATA_FAILED , DUT_UDLL_OTP_CHECK_EMPTY_FAILED , DUT_UDLL_OTP_BIN_WR_INIT , DUT_UDLL_OTP_BIN_WR_STARTED , DUT_UDLL_OTP_BIN_WR_OK , DUT_UDLL_OTP_BIN_WR_FAILED , DUT_UDLL_OTP_CS_WRITE_INIT , DUT_UDLL_OTP_CS_WRITE_STARTED , DUT_UDLL_OTP_CS_WRITE_NUM_OF_ENTRIES , DUT_UDLL_OTP_CS_WRITE_STATUS , DUT_UDLL_OTP_CS_WRITE_RDBK_STARTED , DUT_UDLL_OTP_CS_WRITE_RDBK_STATUS , DUT_UDLL_OTP_CS_WRITE_OK , DUT_UDLL_OTP_CS_WRITE_FAILED , DUT_UDLL_MEM_DATA_WR_INIT , DUT_UDLL_MEM_DATA_WR_STARTED , DUT_UDLL_MEM_DATA_WR_STATUS , DUT_UDLL_MEM_DATA_WR_OK , DUT_UDLL_MEM_DATA_WR_FAILED , DUT_UDLL_MEM_RD_INIT , DUT_UDLL_MEM_RD_STARTED , DUT_UDLL_MEM_RD_OK , DUT_UDLL_MEM_RD_FAILED , DUT_PDLL_BLE_SCAN_INIT , DUT_PDLL_BLE_SCAN_START , DUT_PDLL_BLE_SCAN_NOT_YET_FOUND , DUT_PDLL_BLE_SCAN_FOUND , DUT_PDLL_BLE_SCAN_RSSI_FAILED , DUT_PDLL_BLE_SCAN_FAILED , DUT_GU_ERROR , INVALID_DUT_RES }
	These are the callback status codes for the DUTs. More...

enum	__GU_RES { GU_NOT_ACTIVE = 0 , GU_INTERNAL_SYSTEM_ERROR , GU_COM_OPEN_OK , GU_COM_OPEN_FAILED , GU_RESET_START , GU_RESET_OK , GU_RESET_FAILED , GU_PDLL_NO_ERROR , GU_PDLL_PARAMS_ERROR , GU_PDLL_RX_TIMEOUT , GU_PDLL_TX_TIMEOUT , GU_PDLL_UNEXPECTED_EVENT , GU_PDLL_CANNOT_ALLOCATE_MEMORY , GU_PDLL_INTERNAL_ERROR , GU_PDLL_THREAD_CREATION_ERROR , GU_PDLL_DBG_DLL_ERROR , GU_PDLL_INVALID_DBG_PARAMS , GU_PDLL_COM_PORT_INIT , GU_PDLL_COM_PORT_START , GU_PDLL_COM_PORT_OK , GU_PDLL_COM_PORT_FAILED , GU_PDLL_FW_VERSION_GET_START , GU_PDLL_FW_VERSION_GET_OK , GU_PDLL_FW_VERSION_GET_FAILED , GU_PDLL_FW_VERSION_VALID , GU_PDLL_FW_VERSION_NOT_VALID , GU_PDLL_RDTESTER_INIT , GU_PDLL_RDTESTER_INIT_START , GU_PDLL_RDTESTER_INIT_OK , GU_PDLL_RDTESTER_INIT_FAILED , GU_PDLL_RDTESTER_UART_CONNECT_INIT , GU_PDLL_RDTESTER_UART_CONNECT_START , GU_PDLL_RDTESTER_UART_CONNECT_OK , GU_PDLL_RDTESTER_UART_CONNECT_FAILED , GU_PDLL_RDTESTER_UART_LOOPBACK_INIT , GU_PDLL_RDTESTER_UART_LOOPBACK_START , GU_PDLL_RDTESTER_UART_LOOPBACK_OK , GU_PDLL_RDTESTER_UART_LOOPBACK_FAILED , GU_PDLL_RDTESTER_VBAT_UART_CNTRL_INIT , GU_PDLL_RDTESTER_VBAT_UART_CNTRL_START , GU_PDLL_RDTESTER_VBAT_UART_CNTRL_OK , GU_PDLL_RDTESTER_VBAT_UART_CNTRL_FAILED , GU_PDLL_RDTESTER_VBAT_UART_RST_CNTRL_INIT , GU_PDLL_RDTESTER_VBAT_UART_RST_CNTRL_START , GU_PDLL_RDTESTER_VBAT_UART_RST_CNTRL_OK , GU_PDLL_RDTESTER_VBAT_UART_RST_CNTRL_FAILED , GU_PDLL_RDTESTER_VPP_CNTRL_INIT , GU_PDLL_RDTESTER_VPP_CNTRL_START , GU_PDLL_RDTESTER_VPP_CNTRL_OK , GU_PDLL_RDTESTER_VPP_CNTRL_FAILED , GU_PDLL_RDTESTER_RST_PULSE_INIT , GU_PDLL_RDTESTER_RST_PULSE_START , GU_PDLL_RDTESTER_RST_PULSE_OK , GU_PDLL_RDTESTER_RST_PULSE_FAILED , GU_PDLL_RDTESTER_UART_PULSE_INIT , GU_PDLL_RDTESTER_UART_PULSE_START , GU_PDLL_RDTESTER_UART_PULSE_OK , GU_PDLL_RDTESTER_UART_PULSE_FAILED , GU_PDLL_RDTESTER_XTAL_PULSE_INIT , GU_PDLL_RDTESTER_XTAL_PULSE_START , GU_PDLL_RDTESTER_XTAL_PULSE_OK , GU_PDLL_RDTESTER_XTAL_PULSE_FAILED , GU_PDLL_RDTESTER_PULSE_WIDTH_INIT , GU_PDLL_RDTESTER_PULSE_WIDTH_START , GU_PDLL_RDTESTER_PULSE_WIDTH_OK , GU_PDLL_RDTESTER_PULSE_WIDTH_FAILED , GU_PDLL_RDTESTER_VBAT_CNTRL_INIT , GU_PDLL_RDTESTER_VBAT_CNTRL_START , GU_PDLL_RDTESTER_VBAT_CNTRL_OK , GU_PDLL_RDTESTER_VBAT_CNTRL_FAILED , GU_PDLL_RDTESTER_INVALID_COMMAND , GU_PDLL_PKT_TX_START_INIT , GU_PDLL_PKT_TX_START , GU_PDLL_PKT_TX_STARTED_OK , GU_PDLL_PKT_TX_STARTED_FAILED , GU_PDLL_PKT_TX_ENDED_OK , GU_PDLL_PKT_TX_ENDED_FAILED , GU_PDLL_GPIO_TOGGLE_INIT , GU_PDLL_GPIO_TOGGLE_START , GU_PDLL_GPIO_TOGGLE_FINISHED_OK , GU_PDLL_GPIO_TOGGLE_FAILED , GU_PDLL_BLE_SCAN_INIT , GU_PDLL_BLE_SCAN_START , GU_PDLL_BLE_SCAN_RESET , GU_PDLL_BLE_SCAN_RETRY , GU_PDLL_BLE_SCAN_OK , GU_PDLL_BLE_SCAN_FAILED , GU_PDLL_HCI_STANDARD_ERROR , GU_ALL_DUT_FAILED , INVALID_GU_RES }
	These are the callback status codes for the GU. More...

enum	__INSTR_RES { INSTR_NOT_USED = 0 , INSTR_ONLINE , INSTR_ERROR , INSTR_INIT , INSTR_MEAS_START , INSTR_MEAS_PASSED , INSTR_MEAS_FAILED , INSTR_MEAS_END_OK , INVALID_INSTR_RES }
	These are the callback status codes for the instruments (Ammeter, BLE tester, thermometer). More...

enum	__DUT_NUM { DUT_1 = 1 , DUT_2 = 2 , DUT_3 = 3 , DUT_4 = 4 , DUT_5 = 5 , DUT_6 = 6 , DUT_7 = 7 , DUT_8 = 8 , DUT_9 = 9 , DUT_10 = 10 , DUT_11 = 11 , DUT_12 = 12 , DUT_13 = 13 , DUT_14 = 14 , DUT_15 = 15 , DUT_16 = 16 }
	Enumeration used to set the device numbering at __pltd_dev_params::dut_num. More...

enum	__periph_test_type { PERIPH_USE_GPIO = 0 , PERIPH_USE_CUSTOM_TEST , INVALID_PERIPH_TEST }
	Enumeration used to set the test type at __pltd_periph_test::test_type. More...

Functions
PLTD_API int	pltd_init (void)
	PLTD library initialization function. More...

PLTD_API void	pltd_close (void)
	PLTD library close function. More...

PLTD_API int	pltd_set_device_params (const _pltd_dev_params *params)
	Sets the PLTD library specific device parameters. More...

PLTD_API int	pltd_set_general_params (const _pltd_general_params *pltd_general_params_t)
	Sets the PLTD library general programming parameters, common to all devices. More...

PLTD_API int	pltd_start (void)
	Starts the operation of the PLTD library. More...

PLTD_API int	pltd_com_port_enum (uint32_t *com_port_dut)
	Starts the enumeration of the DUT com ports. More...

PLTD_API int	pltd_gu_com_find (int *gu_com_port)
	Starts automated detection of the GU COM port. More...

PLTD_API int	pltd_gu_check_led (void)
	Checks whether the GU is active by toggling its LED at P10. More...

PLTD_API int	pltd_dbg_init (const _pltd_dbg_params *pltd_dbg_params_t)
	Debug settings. More...

PLTD_API char *	pltd_get_ble_tester_instr_names (const char *prev_name)
	Returns the names of the BLE tester instrument DLLs found. More...

PLTD_API char *	pltd_get_ammeter_instr_names (const char *prev_name)
	Returns the names of the ammeter instrument DLLs found. More...

PLTD_API char *	pltd_get_temp_meas_instr_names (const char *prev_name)
	Returns the names of the ammeter instrument DLLs found. More...

PLTD_API int	pltd_vbat_uart_set (bool start, uint16_t duts)
	Enables device VBAT and opens the device UART through the CPLD on the PLT hardware. More...

PLTD_API int	pltd_uart_coms_test (const _pltd_uart_test *uart_test)
	Test the UART communication path between the PC and the devices under test. More...

PLTD_API _pltd_versions *	pltd_get_versions (void)
	Returns the versions of all the PLTD software components. More...

Detailed Description

Top level production test flow process DLL.

bluet.nosp@m.ooth.nosp@m..supp.nosp@m.ort@.nosp@m.diase.nosp@m.mi.c.nosp@m.om

Definition in file prod_line_tool_dll.h.

Classes

Macros

Typedefs

Enumerations

Functions

Detailed Description