 |
Production Line Tool v5.0
The DA1470x Production Line Tool Software Package
|
|
Production Line Tool v5.0
The DA1470x Production Line Tool Software Package
|
The p_dll API function returns and callback status codes. More...
Macros | |
| #define | PDLL_HCI_STANDARD_ERROR_CODE_BASE 1000 |
| A macro that defines the P_DLL HCI standard error code base. More... | |
Typedefs | |
| typedef enum __PDLL_RETURN_CODES | PDLL_RET |
| The P_DLL return status codes. | |
Enumerations | |
| enum | __PDLL_RETURN_CODES { PDLL_SUCCESS = 0 , PDLL_PARAMS_ERROR , PDLL_RX_TIMEOUT , PDLL_TX_TIMEOUT , PDLL_UNEXPECTED_EVENT , PDLL_CANNOT_ALLOCATE_MEMORY , PDLL_INTERNAL_ERROR , PDLL_THREAD_CREATION_ERROR , PDLL_DBG_DLL_ERROR , PDLL_INVALID_DBG_PARAMS , PDLL_COM_PORT_START , PDLL_COM_PORT_OK , PDLL_COM_PORT_FAILED , PDLL_FW_VERSION_GET_START , PDLL_FW_VERSION_GET_OK , PDLL_RDTESTER_INIT_START , PDLL_RDTESTER_INIT_OK , PDLL_RDTESTER_UART_CONNECT_START , PDLL_RDTESTER_UART_CONNECT_OK , PDLL_RDTESTER_UART_LOOPBACK_START , PDLL_RDTESTER_UART_LOOPBACK_OK , PDLL_RDTESTER_VBAT_UART_CNTRL_START , PDLL_RDTESTER_VBAT_UART_CNTRL_OK , PDLL_RDTESTER_VPP_CNTRL_START , PDLL_RDTESTER_VPP_CNTRL_OK , PDLL_RDTESTER_RST_PULSE_START , PDLL_RDTESTER_RST_PULSE_OK , PDLL_RDTESTER_UART_PULSE_START , PDLL_RDTESTER_UART_PULSE_OK , PDLL_RDTESTER_XTAL_PULSE_START , PDLL_RDTESTER_XTAL_PULSE_OK , PDLL_RDTESTER_PULSE_WIDTH_START , PDLL_RDTESTER_PULSE_WIDTH_OK , PDLL_RDTESTER_VBAT_CNTRL_START , PDLL_RDTESTER_VBAT_CNTRL_OK , PDLL_RDTESTER_VBAT_UART_RST_CNTRL_START , PDLL_RDTESTER_VBAT_UART_RST_CNTRL_OK , PDLL_RDTESTER_INVALID_COMMAND , PDLL_XTAL_TRIM_START , PDLL_XTAL_TRIM_OK , PDLL_XTAL_TRIM_OUT_OF_RANGE , PDLL_XTAL_TRIM_FREQ_CAL_NOT_CONNECTED , PDLL_XTAL_TRIM_WRITE_FAILED , PDLL_XTAL_TRIM_READ_START , PDLL_XTAL_TRIM_READ_OK , PDLL_UART_RESYNC_START , PDLL_UART_RESYNC_OK , PDLL_UART_RESYNC_FAILED , PDLL_CONT_PKT_TX_START , PDLL_CONT_PKT_TX_STARTED_OK , PDLL_HCI_TEST_STOP_START , PDLL_HCI_TEST_STOPPED_OK , PDLL_PKT_TX_START , PDLL_PKT_TX_STARTED_OK , PDLL_PKT_TX_ENDED_OK , PDLL_PKT_RX_STATS_START , PDLL_PKT_RX_STATS_STARTED_OK , PDLL_PKT_RX_STATS_STOP_START , PDLL_PKT_RX_STATS_STOPPED_OK , PDLL_PKT_RX_START , PDLL_PKT_RX_STARTED_OK , PDLL_CUSTOM_ACTION_START , PDLL_CUSTOM_ACTION_OK , PDLL_BLE_SCAN_START , PDLL_BLE_SCAN_OK , PDLL_BLE_ADV_START , PDLL_BLE_ADV_START_OK , PDLL_BLE_ADV_STOP_START , PDLL_BLE_ADV_STOPPED_OK , PDLL_AUDIO_TONE_START , PDLL_AUDIO_TONE_STARTED_OK , PDLL_AUDIO_TONE_STOP , PDLL_AUDIO_TONE_STOPPED_OK , PDLL_AUDIO_TEST_START , PDLL_AUDIO_TEST_ALREADY_ACTIVE , PDLL_AUDIO_TEST_STARTED_OK , PDLL_AUDIO_TEST_STOP , PDLL_AUDIO_TEST_STOPPED_OK , PDLL_AUDIO_TEST_PASSED , PDLL_AUDIO_TEST_FAILED , PDLL_AUDIO_TEST_INVALID_COMMAND , PDLL_GPIO_TOGGLE_START , PDLL_GPIO_TOGGLE_ERROR , PDLL_GPIO_TOGGLE_FINISHED_OK , PDLL_GPIO_SET_START , PDLL_GPIO_SET_ERROR , PDLL_GPIO_SET_FINISHED_OK , PDLL_GPIO_GET_START , PDLL_GPIO_GET_ERROR , PDLL_GPIO_GET_FINISHED_OK , PDLL_GPIO_WD_START , PDLL_GPIO_WD_ERROR , PDLL_GPIO_WD_OK , PDLL_SENSOR_TEST_START , PDLL_SENSOR_TEST_OK , PDLL_SLEEP_START , PDLL_SLEEP_OK , PDLL_UART_LOOP_START , PDLL_UART_LOOP_FAILED , PDLL_UART_LOOP_OK , PDLL_EXT32Khz_TEST_START , PDLL_EXT32Khz_TEST_FAILED , PDLL_EXT32Khz_TEST_OK , PDLL_ADC_VBAT_START , PDLL_ADC_VBAT_OK , PDLL_SET_TX_PWR_START , PDLL_SET_TX_PWR_OK , PDLL_TIMESTAMP_RD_START , PDLL_TIMESTAMP_RD_OK , PDLL_RESET_MODE_START , PDLL_RESET_MODE_OK } |
| The P_DLL return status codes. More... | |
The p_dll API function returns and callback status codes.
| #define PDLL_HCI_STANDARD_ERROR_CODE_BASE 1000 |
| enum __PDLL_RETURN_CODES |
1.9.5