Parameters for NSC_DISCOVER_CMD. More...
#include <ptxNSC.h>
Detailed Description
Parameters for NSC_DISCOVER_CMD.
Field Documentation
◆ Con_Idle
| uint8_t Con_Idle |
Configures the NSC functionality during the idle time.
◆ Con_Idle_Time
| uint8_t Con_Idle_Time[PTX_NSC_DISC_CON_IDLE_TIME_LEN] |
Defines the idle time between two consecutive poll/listen procedures in 32us time units.
◆ Con_Listen
| uint8_t Con_Listen |
General listen mode configuration parameter.
◆ Con_Listen_A
| uint8_t Con_Listen_A |
NFC-A listen mode configuration parameter.
◆ Con_Listen_A_Nfcid1
| uint8_t Con_Listen_A_Nfcid1[PTX_NSC_DISC_CON_LISA_NFCID1_LEN] |
NFC-A identifier of the NFC Forum Device in the Passive Communication mode.
◆ Con_Listen_A_Sel_Res
| uint8_t Con_Listen_A_Sel_Res |
Response to SEL_REQ command.
◆ Con_Listen_A_Sens_Res
| uint8_t Con_Listen_A_Sens_Res[PTX_NSC_DISC_CON_LIS_SENSRESP_LEN] |
Response to SENS_REQ/ALL_REQ command.
◆ Con_Listen_B
| uint8_t Con_Listen_B |
NFC-B listen configuration parameter.
◆ Con_Listen_B_Afi
| uint8_t Con_Listen_B_Afi |
AFI parameter.
◆ Con_Listen_B_Sensb_Res
| uint8_t Con_Listen_B_Sensb_Res[PTX_NSC_DISC_CON_LISB_SENSBRESP_LEN] |
Response to SENSB_REQ/ALLB_REQ command.
◆ Con_Listen_F
| uint8_t Con_Listen_F |
NFC-F listen mode configuration parameter.
◆ Con_Listen_F_Sensf_Res
| uint8_t Con_Listen_F_Sensf_Res[PTX_NSC_DISC_CON_LISF_SENSFRESP_LEN] |
Response to SENSF_REQ command.
◆ Con_Listen_Iso_Dep
| uint8_t Con_Listen_Iso_Dep |
ISO-DEP listen configuration parameter.
◆ Con_Listen_Iso_Dep_Ats
| uint8_t Con_Listen_Iso_Dep_Ats[PTX_NSC_DISC_CON_LIS_ISODEP_ATS_LEN] |
Answer to select .
◆ Con_Listen_Iso_Dep_Attrib_Res
| uint8_t Con_Listen_Iso_Dep_Attrib_Res[PTX_NSC_DISC_CON_LIS_ISODEP_ATTRIB_RES_LEN] |
Response to ATTRIB command.
◆ Con_Listen_Iso_Dep_Attrib_Res_Len
| uint8_t Con_Listen_Iso_Dep_Attrib_Res_Len |
The length of CON_LISTEN_ISO_DEP_ATTRIB_RES parameter.
◆ Con_Listen_Nfc_Dep
| uint8_t Con_Listen_Nfc_Dep |
NFC-DEP listen configuration parameter.
◆ Con_Listen_Nfc_Dep_Atr_Res_G
| uint8_t Con_Listen_Nfc_Dep_Atr_Res_G[PTX_NSC_DISC_CON_LIS_NFCDEP_ATR_RES_G_LEN] |
General bytes of ATR_RES response.
◆ Con_Listen_Nfc_Dep_Atr_Res_G_Len
| uint8_t Con_Listen_Nfc_Dep_Atr_Res_G_Len |
The length of CON_LISTEN_NFC_DEP_ATR_RES_G parameter.
◆ Con_Listen_Nfc_Dep_Atr_Res_Pp
| uint8_t Con_Listen_Nfc_Dep_Atr_Res_Pp |
PP parameter of ATR_RES response.
◆ Con_Listen_Nfc_Dep_Atr_Res_To
| uint8_t Con_Listen_Nfc_Dep_Atr_Res_To |
TO parameter of ATR_RES response.
◆ Con_Listen_V
| uint8_t Con_Listen_V |
NFC-V listen mode configuration parameter.
◆ Con_Listen_V_Inv_Res
| uint8_t Con_Listen_V_Inv_Res[PTX_NSC_DISC_CON_LISV_INVRESP_LEN] |
Response to INVENTORY_REQ command.
◆ Con_Poll
| uint8_t Con_Poll |
General poll mode configuration parameter.
◆ Con_Poll_A
| uint8_t Con_Poll_A |
General NFC-A poll mode configuration parameter.
◆ Con_Poll_A_Cmd
| uint8_t Con_Poll_A_Cmd |
NFC-A poll command.
◆ Con_Poll_A_Dev_Limit
| uint8_t Con_Poll_A_Dev_Limit |
The maximum number of devices to be resolved during the NFC-A poll resolution process.
◆ Con_Poll_A_Freq
| uint8_t Con_Poll_A_Freq |
NFC-A poll frequency.
◆ Con_Poll_B
| uint8_t Con_Poll_B |
General NFC-B poll mode configuration parameter.
◆ Con_Poll_B_Attrib_Inf
| uint8_t Con_Poll_B_Attrib_Inf[PTX_NSC_DISC_CON_POLLB_ATTRIB_INF_LEN] |
ATTRIB command Higher Layer INF parameter.
◆ Con_Poll_B_Cmd
| uint8_t Con_Poll_B_Cmd[PTX_NSC_DISC_CON_POLLB_CMD_LEN] |
NFC-B poll command.
◆ Con_Poll_B_Dev_Limit
| uint8_t Con_Poll_B_Dev_Limit |
The maximum number of devices to be resolved during the NFC-B poll resolution process.
◆ Con_Poll_B_Freq
| uint8_t Con_Poll_B_Freq |
NFC-B poll frequency.
◆ Con_Poll_Disc_Mode
| uint8_t Con_Poll_Disc_Mode |
Determines the RF discovery mode: regular RF discovery, low power card detection or hybrid mode.
◆ Con_Poll_F
| uint8_t Con_Poll_F |
General NFC-F poll mode configuration parameter.
◆ Con_Poll_F_Cmd
| uint8_t Con_Poll_F_Cmd[PTX_NSC_DISC_CON_POLLF_CMD_LEN] |
NFC-F poll command (SENSF_REQ).
◆ Con_Poll_F_Dev_Limit
| uint8_t Con_Poll_F_Dev_Limit |
The maximum number of devices to be resolved during the NFC-F poll resolution process.
◆ Con_Poll_F_Freq
| uint8_t Con_Poll_F_Freq |
NFC-F poll frequency.
◆ Con_Poll_Gt
| uint8_t Con_Poll_Gt |
Guard time (GT) in milliseconds before the GT of the 1st POLL command of the discovery loop.
◆ Con_Poll_Iso_Dep
| uint8_t Con_Poll_Iso_Dep |
ISO-DEP protocol configuration parameter.
◆ Con_Poll_Iso_Dep_Attrib_Inf_Len
| uint8_t Con_Poll_Iso_Dep_Attrib_Inf_Len |
The length of CON_POLL_B_ATTRIB_INF parameter.
◆ Con_Poll_Iso_Dep_Attrib_Param1
| uint8_t Con_Poll_Iso_Dep_Attrib_Param1 |
Defines PARAM1 of ATTRIB command.
◆ Con_Poll_Iso_Dep_Attrib_Param2_Fsdi
| uint8_t Con_Poll_Iso_Dep_Attrib_Param2_Fsdi |
Defines FSDI of PARAM2 of ATTRIB command.
◆ Con_Poll_Iso_Dep_Attrib_Param3
| uint8_t Con_Poll_Iso_Dep_Attrib_Param3 |
Defines PARAM3 of ATTRIB command.
◆ Con_Poll_Iso_Dep_Attrib_Param4
| uint8_t Con_Poll_Iso_Dep_Attrib_Param4 |
Defines PARAM4 of ATTRIB command.
◆ Con_Poll_Iso_Dep_Rats_Param
| uint8_t Con_Poll_Iso_Dep_Rats_Param |
Defines PARAM of RATS command.
◆ Con_Poll_Nfc_Dep
| uint8_t Con_Poll_Nfc_Dep |
NFC-DEP protocol configuration parameter.
◆ Con_Poll_Nfc_Dep_Atr_Req_G
| uint8_t Con_Poll_Nfc_Dep_Atr_Req_G[PTX_NSC_DISC_CON_POLL_NFCDEP_ATR_REQ_G_LEN] |
General bytes of ATR_REQ command.
◆ Con_Poll_Nfc_Dep_Atr_Req_G_Len
| uint8_t Con_Poll_Nfc_Dep_Atr_Req_G_Len |
Defines the length of CON_POLL_NFC_DEP_ATR_REQ_G parameter. Valid values: 0 - 16.
◆ Con_Poll_Nfc_Dep_Atr_Req_Pp
| uint8_t Con_Poll_Nfc_Dep_Atr_Req_Pp |
Indicates the presence of optional parameters.
◆ Con_Poll_V
| uint8_t Con_Poll_V |
General NFC-V poll mode configuration parameter.
◆ Con_Poll_V_Cmd
| uint8_t Con_Poll_V_Cmd[PTX_NSC_DISC_CON_POLLV_CMD_LEN] |
NFC-V poll command (INVENTORY_REQ).
◆ Con_Poll_V_Dev_Limit
| uint8_t Con_Poll_V_Dev_Limit |
The maximum number of devices to be resolved during the NFC-V poll resolution process.
◆ Con_Poll_V_Freq
| uint8_t Con_Poll_V_Freq |
NFC-V poll frequency.
The documentation for this struct was generated from the following file:
