Revision:
	2019/05/27
When to update:
	If the power-up settings for the LED sources (GPIO or CPLD) is incorrect
How to update CPLD:
	USB cable and the attached Windows executable.
	Simply execute the executable. If an older version of CPLD is detected, it will update automatically.
Details of change:
	Previously, after power-up, the LED sources may be different frmo what was set in the GUI.
	After this update, the power-up values are as expected.

-----------------------------------------------------------------------------

Revision:
	2018/10/05
When to update:
	If you are using add-on boards and want to use SCIF0 from the add-on board.
	If you upgraded to revision 2018/08/29 and are experiencing loss of USB connection during reset.
How to update CPLD:
	USB cable and the attached Windows executable.
	Simply execute the executable. If an older version of CPLD is detected, it will update automatically.
Details of change:
	a) If the on-board serial port (Mini-USB connector CN9) is not supplied (ie. connected to a PC),
	   it will interfere with the SCIF0 of the add-on board.
	   After this update the add-on SCIF0 will work as expected.
	b) when the reset button is pressed, the USB connection is shortly lost.
	   This may cause the PC to close a terminal.
	   After this update the USB connection is unaffected during reset.

-----------------------------------------------------------------------------

Revision:
	2018/08/29 (depricated! switch to 2018/10/05 instead)
When to update:
	If you are using add-on boards and want to use SCIF0 from the add-on board.
How to update CPLD:
	USB cable and the attached Windows executable.
	Simply execute the executable. If an older version of CPLD is detected, it will update automatically.
Details of change:
	If the on-board serial port (Mini-USB connector CN9) is not supplied (ie. connected to a PC),
	it will interfere with the SCIF0 of the add-on board.
	After this update the add-on SCIF0 will work as expected.

-----------------------------------------------------------------------------

Revision:
	2018/03/21
When to update:
	If the system does not boot without pressing the reset button after power-up.
How to update CPLD:
	USB cable and the attached Windows executable.
	Simply execute the executable. If an older version of CPLD is detected, it will update automatically.
Details of change:
	After power-up, the reset button had to be pressed, before the code stored in QSPI or HyperFlash is executed.
	After this update the system will boot correctly directly after power-up; no need to press the reset button anymore.

-----------------------------------------------------------------------------

Revision:
	2018/03/10
When to update:
	If you are using Win10 and experiencing problems when updating the CPLD.
How to update CPLD:
	CPLD has not changed.
	Functionallity has not changed.
Details of change:
	When using Win10, downloading of the CPLD sometimes caused the CPLD to become corrupt.
	After this update it is possible to successfully program the CPLD.

-----------------------------------------------------------------------------

Revision:
	2017/10/04
When to update:
	If you intend to use an external QSPI on CH1 at the CoM-Express connector.
How to update CPLD:
	USB cable and the attached Windows executable.
	Simply execute the executable. If an older version of CPLD is detected, it will update automatically.
Details of change:
	The signal QSPI1_SPCLK was not output to the CoM-Express connector when "QSPI device: at CoM-Express connector" was selected in the configuration GUI.
	After this update it is possible to use QSPI CH1.

-----------------------------------------------------------------------------

Revision:
	2017/05/09
When to update:
	If you are experienceing problems with the HDMI output.
How to update CPLD:
	USB cable and the attached Windows executable.
	Simply execute the executable. If an older version of CPLD is detected, it will update automatically.
Details of change:
	After power-up, the HDMI output previously may have remained in an inoperable state until the hardware was power-cycled.
	After this update the HDMI output will operate correctly after every power-up.

-----------------------------------------------------------------------------

Revision:
	2017/04/28
When to update:
	If the system does not boot without pressing the reset button after power-up.
How to update CPLD:
	USB cable and the attached Windows executable.
	Simply execute the executable. If an older version of CPLD is detected, it will update automatically.
Details of change:
	After power-up, the reset button had to be pressed, before the code stored in QSPI or HyperFlash is executed.
	After this update the system will boot correctly directly after power-up; no need to press the reset button anymore.

-----------------------------------------------------------------------------

Revision:
	2017/04/06
Initial Release
