Firmware Programming Y-ASK-RH850U2B
If the starter kit "Y-ASK-RH850U2B" does not have a firmware that complies
with the tool "ASK_U2BX_Configurator" the firmware "Y-ASK-RH850U2B_fw.srec"
must be programmed manually to the RL78 controller of the starter kit.

Please follow these instructions: 

1) Download the latest Renesas Flash Programmer from Renesas webpage:
   www.renesas.com/rfp

2) Install Renesas Flash Programmer.

3) Connect any Renesas OCD emulator (E1, E2 or E2 lite) to your PC and 
   start the Renesas Flash Programmer

4) Setup a new project for RL78 and program the above-mentioned firmware.