跳转到主要内容

概览

描述

The SLG46580 is a small, low-power component commonly used to integrate mixed-signal functions under the control of an asynchronous state machine. The user creates the circuit design by programming the one-time programmable (OTP) non-volatile memory (NVM) to configure the interconnect logic, the I/O pins, and the macrocells of the SLG46580. This highly versatile device allows for a wide variety of functions and control logic to be designed within a very small, low-power monolithic integrated circuit.

特性

  • Programmable Asynchronous State Machine
  • Logic and Mixed-Signal Circuits
  • Highly Versatile Macrocells
  • Read Back Protection (Read Lock)
  • Four 150mA LDO Regulators (SLG46580)
  • Two 300mA LDO Regulators (SLG46582)
  • One 600mA LDO Regulators (SLG46583)
  • I2C Interface
  • 2.5V (±8%) to 5V (±10%) Supply
  • Operating Temperature Range: -40 °C to 85 °C
  • RoHS-Compliant/Halogen-Free
  • Macrocells Overview
  • Four Analog Comparators (ACMP)
  • Voltage Reference (Vref) for ACMPs
  • Analog Temperature Sensor
  • Fifteen Combination Function Macrocells
    • Three Selectable DFF/Latch or 2-bit LUTs
    • Six Selectable DFF/Latch or 3-bit LUTs
    • One Selectable Pipe Delay or Ripple Counter or 3-bit LUT
    • Five 8-bit Delays/Counters or 3-bit LUTs
  • Combinatorial Logic
    • One 4-bit LUT with Two Outputs
  • Asynchronous State Machine
    • Eight States
    • Flexible Input Logic from State Transitions
  • Real-Time Clock (RTC) Binary Counter
  • Four Tri-Mode 150mA LDO Regulators
    • High Power Mode (HP Mode): 150mA output with Quiescent Current at ~80μA
    • Low Power Mode (LP Mode): 100μA output with Quiescent Current at ~5μA
    • Bypass Mode: Acts Like a Load Switch
  • Serial Communications
    • I2C Slave Protocol Interface
  • Programmable Delay with Edge Detector Output
  • Additional Logic Functions
    • 2 Deglitch Filters with Edge Detectors
  • Two Oscillators (OSC)
    • Configurable 25kHz/2MHz
    • 2kHz Low Power Oscillator
  • Eight-Byte RAM + OTP User Memory
    • RAM Memory Space that is Readable and Writable via I2C
    • User-defined Initial Values Transferred from OTP
  • Power-On Reset (POR)

产品对比

应用

文档

类型 文档标题 日期
数据手册 PDF 2.49 MB
宣传手册 PDF 12.71 MB 日本語
器件勘误表 PDF 1.03 MB
应用笔记 PDF 322 KB
应用笔记 PDF 779 KB
应用笔记 PDF 431 KB
应用笔记 PDF 402 KB
7 items

设计和开发

软件与工具

软件与工具

Software title
Software type
公司
Go Configure Software Hub
Go Configure Software Hub 为各种产品提供开发支持,包括 GreenPAK 可配置混合信号矩阵和 ForgeFPGA™ 器件。
Software Package 瑞萨电子
1 item

开发板与套件

模型

ECAD 模块

点击产品选项表中的产品,查找 SamacSys 中的原理图符号、PCB 足迹和 3D CAD 模型。点击产品选项表中的产品,查找 SamacSys 中的原理图符号、PCB 足迹和 3D CAD 模型。
 

Diagram of ECAD Models
此为出厂可配置设备。试用自定义部件配置工具

产品选项

当前筛选条件

视频和培训