跳转到主要内容

概览

描述

The SLG46533V/M provides a small, low-power component for commonly used mixed-signal functions. The user creates their circuit design by programming the one-time programmable (OTP) non-volatile memory (NVM) to configure the interconnect logic, the I/O pins, and the macrocells of the SLG46533V/M. This highly versatile device allows for a wide variety of mixed-signal functions to be designed within a very small, low-power single integrated circuit.

特性

  • Logic and Mixed-Signal Circuits
  • Highly Versatile Macrocells
  • Read Back Protection (Read Lock)
  • 1.8V (±5%) to 5V (±10%) Supply
  • Operating Temperature Range: -40 °C to 85 °C
  • RoHS-Compliant/Halogen-Free
  • Macrocells Overview
    • Four Analog Comparators (ACMP)
    • Two Voltage References (Vref)
    • Twenty-six Combination Function Macrocells
      • Three Selectable DFF/Latch or 2-bit LUTs
      • Twelve Selectable DFF/Latch or 3-bit LUTs
      • One Selectable Pipe Delay or 3-bit LUT
      • One Selectable Programmable Pattern Generator or 2-bit LUT
      • Five 8-bit delays/counters or 3-bit LUTs
      • Two 16-bit delays/counters or 4-bit LUTs
      • Two Deglitch Filters with Edge Detectors
    • Combinatorial Logic
      • One 4-bit LUT
    • Serial Communications
      • I2C Protocol compliant
    • 16x8 RAM Memory with Defined NVM OTP Initial State
    • Pipe Delay - 16 Stage/3 Output (Part of Combination Function Macrocell)
    • Programmable Delay
    • Two Oscillators (OSC)
      • Configurable 25kHz/2MHz
      • 25MHz RC Oscillator
    • Crystal Oscillator
    • Power-On Reset (POR)
    • Analog Temperature Sensor

产品对比

应用

  • Personal Computers and Servers
  • PC Peripherals
  • Consumer Electronics
  • Data Communications Equipment
  • Handheld and Portable Electronics

文档

设计和开发

软件与工具

软件与工具

Software title
Software type
公司
Go Configure Software Hub
Go Configure Software Hub 为各种产品提供开发支持,包括 GreenPAK 可配置混合信号矩阵和 ForgeFPGA™ 器件。
Software Package 瑞萨电子
1 item

开发板与套件

模型

ECAD 模块

点击产品选项表中的产品,查找 SamacSys 中的原理图符号、PCB 足迹和 3D CAD 模型。点击产品选项表中的产品,查找 SamacSys 中的原理图符号、PCB 足迹和 3D CAD 模型。
 

Diagram of ECAD Models
此为出厂可配置设备。试用自定义部件配置工具

产品选项

当前筛选条件

视频和培训