跳转到主要内容

概览

描述

The F1241 IF VGA featuring FlatNoise™ technology improves system SNR, especially at lower gain settings. By keeping both IP3O and NF flat while gain is backed off, the system SNR is improved significantly under high-level interferer conditions, especially when considering alias noise in an IF sampling receiver. The fast-settling, parallel mode gain step of 1.0dB coupled with the excellent differential non-linearity allows for SNR to be maximized further by targeting the minimum necessary gain in small, accurate increments. The matched output does not require a terminating resistor, thus the gain and distortion performance are preserved when driving Bandpass Anti-Alias filters.

特性

  • Ideal for systems with high SNR requirements
  • 20dB typical maximum gain
  • 31dB gain control range
  • 5-bit control
  • 1.0dB gain steps
  • Excellent noise figure ~ 4.0dB
  • 5mm x 5mm 32-pin package
  • 200Ω differential matched input
  • 200Ω differential matched output
  • No termination resistor required
  • NF degrades < 2dB at 10dB reduced gain
  • 10MHz to 500MHz frequency range
  • Ultra-linear: IP3O +47dBm typical
  • Excellent 2nd harmonic rejection
  • Parallel control
  • External current setting resistors
  • Very fast settling < 15nsec
  • Individual Power-Down modes
  • Extremely low power consumption:  79mA/Ch

产品对比

应用

文档

类型 文档标题 日期
数据手册 PDF 1.91 MB
指南 PDF 2.24 MB
指南 PDF 2.83 MB
产品变更通告 PDF 39 KB
产品变更通告 PDF 35 KB
产品变更通告 PDF 33 KB
6 items

设计和开发

软件与工具

软件下载

类型 文档标题 日期
软件和工具 - 软件 登录后下载 ZIP 169.81 MB
1 item

开发板与套件

模型

ECAD 模块

点击产品选项表中的 CAD 模型链接,查找 SamacSys 中的原理图符号、PCB 焊盘布局和 3D CAD 模型。如果符号和模型不可用,可直接在 SamacSys 请求该符号或模型。

Diagram of ECAD Models

模型

类型 文档标题 日期
模型 - 散射参数 ZIP 905 KB
1 item

产品选项

当前筛选条件