This device is a BiCMOS interface IC that is user-configured as either a single RS-422/RS-485 differential transceiver or as a dual (2 Tx, 2 Rx) RS-232 transceiver. In RS-232 mode, the on-board charge pump generates RS-232 compliant ±5V Tx output levels, from a supply as low as 3.15V. Four small 0.1µF capacitors are required for the charge pump. The transceivers are RS-232 compliant, with the Rx inputs handling up to ±25V. In RS-485 mode, the transceivers support both the RS-485 and RS-422 differential communication standards. The RS-485 receiver features full failsafe operation, so the Rx output remains in a high state if the inputs are open or shorted together. The RS-485 transmitter supports up to three data rates, two of which are slew rate limited for problem-free communications. The charge pump disables in RS-485 mode, thereby saving power, minimizing noise and eliminating the charge pump capacitors. Both RS-232/RS-485 modes feature loopback and shutdown functions. The loopback mode internally connects the Tx outputs to the corresponding Rx input, which facilitates the implementation of board-level self-test functions. The outputs remain connected to the loads during loopback, where connection problems (e.g., shorted connectors or cables) can be detected. The shutdown mode disables the Tx and Rx outputs, disables the charge pump if in RS-232 mode, and places the IC in a low current (30µA) mode. The ISL3331 is a QFN packaged device that offers additional functionality, including a lower speed and edge rate option (115kbps) for EMI sensitive designs, or to allow longer bus lengths. It also features a logic supply voltage pin (VL) that sets the VOH level of logic outputs, and the switching points of logic inputs, to be compatible with another supply voltage in mixed voltage systems. The QFN's choice of active high or low Rx enable pins increases design flexibility, allowing Tx/Rx direction control via a single signal by connecting DEN and RXEN together. For a dual-port version of these devices, see the ISL3332/ISL3333 datasheet.
文档标题 | 类型 | 日期 | |
---|---|---|---|
PDF1.39 MB
|
数据手册
|
||
PDF1023 KB
|
应用文档
|
||
PDF207 KB
|
应用文档
|
||
PDF474 KB
|
应用文档
|
||
PDF178 KB
|
应用文档
|
||
PDF513 KB
|
应用文档
|
||
PDF826 KB
|
应用文档
|
||
PDF443 KB
|
应用文档
|
||
PDF582 KB
|
应用文档
|
||
PDF440 KB
|
应用文档
|
||
PDF338 KB
|
应用文档
|
||
PDF365 KB
|
应用文档
|
||
PDF375 KB
|
应用文档
|
||
PDF4.91 MB
|
手册
|
||
PDF156 KB
|
其他
|
||
PDF253 KB
|
其他
|
||
PDF359 KB
|
其他
|
||
PDF580 KB
|
其他
|
||
PDF326 KB
|
产品变更通告
|
||
PDF398 KB
|
产品变更通告
|
||
PDF222 KB
|
产品变更通告
|
||
PDF106 KB
|
产品变更通告
|
||
PDF173 KB
|
产品变更通告
|
||
PDF248 KB
|
产品变更通告
|
||
PDF300 KB
|
技术摘要
|
||
PDF328 KB
|
技术摘要
|
||
白皮书
|
The ISL3331EVAL1Z evaluation board is RoHS compliant and provides a quick and easy method for evaluating the ISL3331 BiCMOS interface IC. The board was designed to...
Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on products in the Product Options table. If a symbol or model isn't available, it can be requested directly from the website.