概览

简介

The ISL6306 controls microprocessor core voltage regulation by driving up to 4 synchronous-rectified buck channels in parallel. Multiphase buck converter architecture uses interleaved timing to multiply channel ripple frequency and reduce input and output ripple currents. Lower ripple results in fewer components, lower component cost, reduced power dissipation, and smaller implementation area. Microprocessor loads can generate load transients with extremely fast edge rates. The ISL6306 features a high bandwidth control loop and ripple frequencies up to >4MHz to provide optimal response to the transients. today's microprocessors require a tightly regulated output voltage position versus load current (droop). The ISL6306 senses current by utilizing patented techniques to measure the voltage across the on resistance, rDS(ON), of the lower MOSFETs or DCR of the output inductor during the lower MOSFET conduction intervals. Current sensing provides the needed signals for precision droop, channel-current balancing, and overcurrent protection. A programmable internal temperature compensation function is implemented to effectively compensate for the temperature coefficient of the current sense element. A unity gain, differential amplifier is provided for remote voltage sensing. Any potential difference between remote and local grounds can be completely eliminated using the remotesense amplifier. Eliminating ground differences improves regulation and protection accuracy. The threshold-sensitive enable input is available to accurately coordinate the start up of the ISL6306 with any other voltage rail. Dynamic-VID™ technology allows seamless on-the-fly VID changes. The offset pin allows accurate voltage offset settings that are independent of VID setting.

特性

  • Precision Multiphase Core Voltage Regulation
  • Differential Remote Voltage Sensing
  • ±0.5% System Accuracy Over Life, Load, Line and Temperature
  • Adjustable Precision Reference-Voltage Offset
  • Precision rDS(ON) or DCR Current Sensing
  • Accurate Load-Line Programming
  • Accurate Channel-Current Balancing
  • Differential Current Sense
  • Microprocessor Voltage Identification Input
  • Dynamic VID™ Technology
  • 8-Bit VID Input with Selectable VR11 Code and Extended VR10 Code at 6.25mV per Bit
  • 0.5V to 1.6V Operation Range
  • Thermal Monitoring
  • Integrated Programmable Temperature Compensation
  • Threshold-Sensitive Enable Function for Power Sequencing and VTT Enable
  • Overcurrent Protection
  • Overvoltage Protection
  • 2-, 3- or 4-Phase Operation
  • Adjustable Switching Frequency Up to 1MHz Per Phase
  • Package Option
  • QFN Compliant to JEDEC PUB95 MO-220 QFN - Quad Flat No Leads - Product Outline
  • QFN Near Chip Scale Package Footprint; Improves PCB Efficiency, Thinner in Profile
  • Pb-Free (RoHS Compliant)

文档

类型
日期
PDF 1.68 MB 数据手册
PDF 5.51 MB 日文 手册
PDF 603 KB End Of Life Notice
PDF 326 KB 产品变更通告
SXSCH 373 KB 原理图
PDF 388 KB End Of Life Notice
PDF 398 KB 产品变更通告
PDF 151 KB 产品变更通告
PDF 222 KB 产品变更通告
PDF 106 KB 产品变更通告
PDF 173 KB 产品变更通告
PDF 248 KB 产品变更通告
PDF 509 KB 应用文档
PDF 397 KB 应用文档
14 items

设计和开发

软件与工具

软件与工具

Software title
Software type
公司
iSim:PE Offline Simulation Tool
iSim Personal Edition (iSim:PE) speeds the design cycle and reduces risk early in any project, identifying parts that can be used in current as well as next-generation designs.
Simulator 瑞萨电子
1 item

软件下载

类型 日期
PDF 603 KB End Of Life Notice
PDF 388 KB End Of Life Notice
2 items

模型

模型

类型 日期
SXSCH 326 KB 模型 - iSim
SXSCH 421 KB 模型 - iSim
2 items