GreenPAK SLG46585 （MSTQFN-29） 29 引脚 DIP 原型板
SLG46585M-DIP 29 引脚 DIP 原型板非常适合试验板和快速原型设计。 它需要 DIP 适配器 （SLG4SA-DIP） 才能与高级开发板一起使用。
概览
描述
The SLG46585 is a small, low-power component commonly used to integrate mixed-signal functions under the control of an asynchronous state machine. The user creates the circuit design by programming the one-time programmable (OTP) non-volatile memory (NVM) to configure the interconnect logic, the I/O pins, and the macrocells of the SLG46585. This highly versatile device allows for a wide variety of functions and control logic to be designed within a very small, low-power monolithic integrated circuit.
特性
- Programmable Asynchronous State Machine
- Logic and Mixed Signal Circuits
- Highly Versatile Macrocells
- Read Back Protection (Read Lock)
- Four 150mA LDO Regulators
- I2C Interface
- 2.5V (±8%) to 5V (±10%) Supply
- Operating Temperature Range: -40 °C to 85 °C
- RoHS-Compliant/Halogen-Free
- Macrocells Overview
- Four Analog Comparators (ACMP)
- Voltage Reference (Vref) for ACMPs
- Analog Temperature Sensor
- Fifteen Combination Function Macrocells
- Three Selectable DFF/Latch or 2-bit LUTs
- Six Selectable DFF/Latch or 3-bit LUTs
- One Selectable Pipe Delay or Ripple Counter or 3-bit LUT
- Five 8-bit Delays/Counters or 3-bit LUTs
- Combinatorial Logic:
- One 4-bit LUT with Two Outputs
- Asynchronous State Machine
- Eight States
- Flexible Input Logic from State Transitions
- Real-Time Clock (RTC) Binary Counter
- Four Tri-Mode 150mA LDO Regulators
- High Power Mode (HP Mode): 150mA output
- Low Power Mode (LP Mode): 100μA output
- Bypass Mode: Acts Like a Load Switch
- 1A Synchronous DC/DC Step-Down Converter
- Serial Communications
- Proprietary 2-Wire interface "PC2W"
- I2C Slave Protocol Interface
- Programmable Delay with Edge Detector Output
- Additional Logic Functions
- 2 Deglitch Filters with Edge Detectors
- Two Oscillators (OSC)
- Configurable 25kHz/2MHz
- 2kHz Low Power Oscillator
- Eight-Byte RAM + OTP User Memory
- RAM Memory space that is readable and writable via I2C
- User-defined initial values transferred from OTP
- Power-On Reset (POR)
产品对比
应用
文档
相关文档
请登录后开启订阅
|
|
|
|
|---|---|---|
| 类型 | 文档标题 | 日期 |
| 数据手册 | PDF 5.06 MB | |
| 宣传手册 | PDF 12.71 MB 日本語 | |
| 器件勘误表 | PDF 705 KB | |
| 应用笔记 | PDF 558 KB | |
4 items
|
||
设计和开发
软件与工具
软件与工具
| Software title
|
Software type
|
公司
|
|---|---|---|
| Go Configure Software Hub Go Configure Software Hub 为各种产品提供开发支持，包括 GreenPAK 可配置混合信号矩阵和 ForgeFPGA™ 器件。
|
Software Package | 瑞萨电子 |
1 item
|
||
开发板与套件
GreenPAK SLG46585 Development Kit with Socket Adapter
The SLG46585M-SKT includes the SLG4SA29-30x30 socket adapter and 50 SLG46585M samples.
GreenPAK 高级开发板
GreenPAK 高级开发板为 GreenPAK 器件提供完整的编程、仿真和测试功能 - 适用于 SLG46xxxX-SKT / SLG47xxxV-SKT 插座套件。
它与 GreenPAK Designer 软件（内置于 Go Configure™ Software Hub...
可在云上实验室使用
使用我们基于 PC 的 GUI，无需物理板即可在虚拟实验室中立即开始配置和测试设计
GreenPAK Serial Debugger Board (GSD)
GreenPAK Serial Debugger (GSD) device can be used for programming GreenPAK products with multiple-time Non-Volatile Memory (NVM) or for configuring the interconnect...
GreenPAK Lite 开发板
GreenPAK Lite 开发板为 GreenPAK 设备提供完整的编程、仿真和测试功能，与 Go Configure™ 软件中心配对工作。 板卡功能由瑞萨电子的 RX66T MCU 提供。
RZ/G3S 评估板套件
该评估板套件适用于评估 RZ/G3S。 RZ/G3S 评估板套件由模块板 (SOM) 和扩展板组成。 模块板符合 SMARC v2.1 标准。
- 目录
- RZ/G3S SMARC 模块板 (SMARC2.1)
- RZ SMARC 系列扩展板 II
- RZ SMARC 系列 JTAG 适配器电缆
- USB Type-A 转 USB Micro B...
模型
ECAD 模块
点击产品选项表中的产品，查找 SamacSys 中的原理图符号、PCB 足迹和 3D CAD 模型。点击产品选项表中的产品，查找 SamacSys 中的原理图符号、PCB 足迹和 3D CAD 模型。
产品选项
当前筛选条件
视频和培训
GreenPAK I2C
Video List
