Automotive Dual Synchronous Buck Controller with Integrated Drivers Evaluation Board
The ISL78264EVAL1Z evaluation board is used to evaluate the two-channel synchronous buck converter operation of the ISL78264 dual buck controller in which the...
The ISL78264 is a dual buck controller that can operate across a wide VIN range of 3.75V to 42V. It is designed to support wide duty-cycle operation for switching frequencies from 200kHz up to 2.2MHz. To mitigate EMI, it supports synchronization to an external clock or programmable spread spectrum clocking. Its current-mode modulator is ideally suited to tolerate severe line transients. Also, the ISL78264 supports dropout operation and low 25ns on-time to operate through automotive cranking and load dump pulses.
The ISL78264 integrates robust MOSFET drivers and readily supports step-down applications requiring high output currents in normal operation. For applications that must also sustain extremely low power, always-on operation, its energy conservation mode can reduce operating current to 6µA. Integrated feedback for VOUT1 is provided for 3.3V or 5V applications to eliminate the current otherwise flowing in external feedback resistors. An automatic switchover to an external supply is also supported to maximize efficiency. A blocking diode is activated after startup to prevent the external supply from back-biasing a low input voltage at VIN.
The ISL78264 is qualified to AEC-Q100 Grade 1, specified to operate across an ambient temperature range of -40 °C to 125 °C, and is available in a 5mm x 5mm, 32 Ld WFQFN (Wettable Flank) package.
|
|
|
---|---|---|
类型 | 文档标题 | 日期 |
数据手册 | PDF 1.99 MB | |
产品咨询 | PDF 414 KB | |
产品变更通告 | PDF 211 KB | |
手册 - 开发工具 | PDF 920 KB | |
4 items
|
The ISL78264EVAL1Z evaluation board is used to evaluate the two-channel synchronous buck converter operation of the ISL78264 dual buck controller in which the...
The ISL78263EVAL1Z evaluation board is used to evaluate the dual-converter, synchronous buck-and-boost operation of the ISL78263 controller. The board evaluates Channel...
点击产品选项表中的产品,查找 SamacSys 中的原理图符号、PCB 足迹和 3D CAD 模型。点击产品选项表中的产品,查找 SamacSys 中的原理图符号、PCB 足迹和 3D CAD 模型。
当前筛选条件