GreenPAK SLG46117 Development Kit with Socket Adapter
The SLG46117V-SKT is a socket adapter kit for use with the SLG4DVKADV GreenPAK Advanced Development Board or SLG4DVKLITE GreenPAK Lite Development Board. The...
概览
描述
The SLG46117 combines the functionality and versatility of a programmable mixed-signal matrix with the capabilities of Renesas' Copper-based Field-Effect Transistor (CuFET) technology. Capable of integrating a number of common discrete ICs and passive components into a single device, the GreenPAK family’s SLG46117 enables high power switching with a soft-start 1.25A P-Channel MOSFET with slew rate control and integrated discharge resistor.
特性
- Logic and Mixed Signal Circuits
- Highly Versatile Macrocells
- Read Back Protection (Read Lock)
- 1.8V (±5%) to 5V (±10%) Supply
- Operating Temperature Range -40 °C to 85 °C
- Soft-Start 1.25A P-FET Power Switch with discharge
- Pb-Free/Halogen-Free/RoHS compliant
- Macrocells Overview
- Two Analog Comparators (ACMP)
- Voltage References (Vref)
- Four Combinatorial Look-Up Tables (LUTs)
- Two 2-bit LUTs
- Two 3-bit LUTs
- Seven Combination Function Macrocell
- Two Selectable DFF/Latch or 2-bit LUTs
- Two Selectable DFF/Latch or 3-bit LUTs
- One Selectable Pipe Delay or 3-bit LUT
- Pipe Delay – 8 stage/2 output
- One Selectable Counter/Delay or 4-bit LUT
- One Programmable Delay/Deglitch Filter
- Three Counter/Delay Generators (CNT/DLY)
- Three 8-bit counter/delays with external clock/reset
- Four D Flip-Flop/Latches (DFF) (Part of Combination Function Macrocell)
- Pipe Delay – 8 stage/2 output (Part of Combination Function Macrocell)
- Trimmed RC Oscillator (RC OSC)
- Power-On Reset (POR)
- One Bandgap
- Soft-Start P-FET Power Switch
- Power Switch IDS: 1.25A
- Slew Rate Control
- VIN: 1.5V to 5.5V
- Integrated Discharge Resistor
- Low RDSON
- 28.5mΩ at 5.0V
- 36.4mΩ at 3.3V
- 44.3mΩ at 2.5V
- 60.8mΩ at 1.8V
- 77.6mΩ at 1.5V
产品对比
应用
- Power sequencing with complex analog control
- Power plane component size reduction project
- LED drivers
- Haptic motor drivers
- System RESET with power switch
文档
相关文档
请登录后开启订阅
|
|
|
|
|---|---|---|
| 类型 | 文档标题 | 日期 |
| 数据手册 | PDF 1.37 MB | |
| 宣传手册 | PDF 12.71 MB 日本語 | |
| 应用笔记 | PDF 363 KB | |
| 应用笔记 | PDF 255 KB | |
| 器件勘误表 | PDF 986 KB | |
5 items
|
||
设计和开发
开发板与套件
GreenPAK SLG46117 20-pin DIP Prototyping Board
The SLG46117V-DIP 20-pin DIP Prototyping Board is perfect for breadboarding and fast prototypes. It requires the DIP Adapter (SLG4SA-DIP) to use it with the Advanced...
GreenPAK 高级开发板
GreenPAK 高级开发板为 GreenPAK 器件提供完整的编程、仿真和测试功能 - 适用于 SLG46xxxX-SKT / SLG47xxxV-SKT 插座套件。
它与 GreenPAK Designer 软件（内置于 Go Configure™ Software Hub...
可在云上实验室使用
使用我们基于 PC 的 GUI，无需物理板即可在虚拟实验室中立即开始配置和测试设计
GreenPAK DIP Adapter for GreenPAK Advanced Development Board
The GreenPAK DIP Adapter for the GreenPAK Advanced Development Board allows using the SLG46xxxV-DIP and SLG47xxxV-DIP Proto boards with the GreenPAK Advanced...
GreenPAK Lite 开发板
GreenPAK Lite 开发板为 GreenPAK 设备提供完整的编程、仿真和测试功能，与 Go Configure™ 软件中心配对工作。 板卡功能由瑞萨电子的 RX66T MCU 提供。
RZ/N2L 工业网络 SOM 套件
YCONNECT-IT-RZN2L 是一款紧凑型开发套件，用于评估使用工业以太网与 RZ/N2L MPU 通信的应用。 该套件包含两个预组装的电路板，分别为“Stamp 模块”和“载板”。
该套件提供 EtherCAT 和 EtherNet/IP 的示例软件，未来将支持 PROFINET、Modbus TCP 和 OPC UA...
可在云上实验室使用
使用我们基于 PC 的 GUI，无需物理板即可在虚拟实验室中立即开始配置和测试设计
模型
ECAD 模块
点击产品选项表中的产品，查找 SamacSys 中的原理图符号、PCB 足迹和 3D CAD 模型。点击产品选项表中的产品，查找 SamacSys 中的原理图符号、PCB 足迹和 3D CAD 模型。
产品选项
当前筛选条件
视频和培训
GreenPAK Configurable Mixed-signal IC Introduction
Video List
