特性
- 2.8V to 5.5V input voltage
- 0.3V to 1.57V output voltage
- 2x 10A output current
- Dynamic Voltage Control
- 3MHz nominal switching frequency avoiding the AM band
- Load transient response ±3.5%
- Adjustable soft start
- -40 °C to +105 °C temperature range
- Interface I2C and SPI
- Package: BGA 5.8mm x 3.8mm 0.5mm pitch
描述
The DA9214-A is a synchronous dual step-down converter supplying the processor's core and GPU rail in automotive infotainment and navigation system applications requiring high currents. DA9214-A is also suitable for powering FPGAs.
The input voltage range of 2.8V to 5.5V makes it suitable for standard 5V supplies or USB power supplies. DA9214-A delivers2x 10A output current, suitable for the highest performing application processors such as multicore arrangements of the Arm® Cortex®-A15/A57 family. Due to the multiphase topology, DA9214-A provides outstanding load transient response and component sizes below 1mm height.
Benefits
- Dynamic Voltage Control (DVC)
- Integrated power switches
- Remote sensing at point of load
- High efficiency over a wide output range
- Low output ripple
- Small <1mm height components
Supported SoC PMIC Platforms
- Xilinx MPSoCs and FPGAs
- Xilinx Zynq UltraScale+ MPSoC (ZU3CG, ZU9EG, ZU19EG)
- Renesas R-Car Processor Family
- R-Car H3
产品参数
| 属性 | 值 |
|---|---|
| Function | 2-ch PMIC |
| Outputs (#) | 2 |
| Input Voltage (Min) (V) | 2.8 |
| Input Voltage (Max) (V) | 5.5 |
| Output Current Max (A) | 20 |
| USB-Power Management | No |
| GPIOs (#) | 3 |
| Integrated step-down DC/DC Converter Channels (#) | 2 |
| Total step-down DC/DC converter channels (#) | 2 |
| Comm. Interface | I2C & SPI |
封装选项
| Pkg. Type | Lead Count (#) | Pitch (mm) |
|---|---|---|
| BGA | 66 | 0.5 |
应用方框图
|
采用更少组件的信息娱乐与自动驾驶系统
自动驾驶系统，带有可配置 IC，可实现经济高效的集成和灵活性。
|
|
支持触觉反馈的汽车座舱系统
先进的座舱系统，配备新一代触觉反馈技术、BroadLED 驱动器和 PMIC。
|
|
胎压监测系统
低功耗蓝牙 LE TPMS 设计，集成了 PMIC，可降低成本、缩小尺寸和缩短开发时间。
|
其他应用
- Automotive infotainment
- Automotive navigation devices
- Advanced Driver Assistance Systems (ADAS)