
This is an Emulation Adapter for RH850 Family. Using with the separately available exchange adapter, it enables emulation of the target MCU you are using.
Connecting an emulator which supports Aurora tracing Note, such as the IE850A emulator from Renesas, to the emulation adapter enables debugging with the use of a tracing facility.
Using the attached 34-pin to 14-pin conversion connector enables connection of the E2 emulator from Renesas.
The combination of the emulation adapter connected to the base board included in the package is usable as an evaluation board for the target MCU.
Note: Aurora is a high-speed communications protocol from Xilinx Inc. but is not supported by the E2 emulator.
Item | Description |
---|---|
Emulator supported | E2、IE850A、various emulators from Renesas Partners |
Target MCUs | RH850/E2UH, RH850/E2H |
User system connection | Connected to the connecter mounted on the foot pattern of the MCU via an adapter. |
External dimensions | Emulation adapter:47mm×51mm Base board:100mm×120mm |
Weight | Emulation adapter:22g Base board:79g |
Conformance with overseas standards | EU:EN55032 Class A, EN55024 USA:FCC part 15 Class A |
When designing a user system refer to the following descriptions in the Emulation Adapter for the RH850/E2UH and E2H Groups User's Manual (PDF | English, 日本語) Emulation Adapter for the RH850/E2UH and E2H Groups.
For other optional products than the emulation adapter, refer to the users manual.