Lead Count (#) | 32 |
Pkg. Code | NLG32 |
Pitch (mm) | 0.5 |
Pkg. Type | VFQFPN |
Pkg. Dimensions (mm) | 5.0 x 5.0 x 0.9 |
Moisture Sensitivity Level (MSL) | 3 |
Pb (Lead) Free | Yes |
ECCN (US) | NLR |
HTS (US) | 8542390001 |
Lead Count (#) | 32 |
Carrier Type | Reel |
Moisture Sensitivity Level (MSL) | 3 |
Qty. per Reel (#) | 2500 |
Qty. per Carrier (#) | 0 |
Pb (Lead) Free | Yes |
Pb Free Category | e3 Sn |
Temp. Range | -40 to +85°C |
Country of Assembly | Taiwan |
Country of Wafer Fabrication | Singapore |
Price (USD) | 1ku | 4.70476 |
Additive Phase Jitter Typ RMS (fs) | 60 |
Additive Phase Jitter Typ RMS (ps) | 0.06 |
Adjustable Phase | No |
Channels (#) | 2 |
Core Voltage (V) | 1.8, 2.5, 3.3 |
Divider Value | 2, 511 |
Family Name | 8P79 |
Function | Buffer, Divider |
Input Freq (MHz) | 0.000001 - 700 |
Input Type | LVDS, LVPECL, LVHSTL, LVCMOS |
Inputs (#) | 2 |
Length (mm) | 5 |
MOQ | 2500 |
Noise Floor (dBc/Hz) | -154 |
Output Banks (#) | 2 |
Output Freq Range (MHz) | 0.000001 - 700 |
Output Skew (ps) | 100 |
Output Type | LVPECL, CML, LVDS, HCSL |
Output Voltage (V) | 1.5, 1.8, 2.5, 3.3 |
Outputs (#) | 8 |
Pitch (mm) | 0.5 |
Pkg. Dimensions (mm) | 5.0 x 5.0 x 0.9 |
Pkg. Type | VFQFPN |
Prog. Interface | I2C |
Reel Size (in) | 13 |
Requires Terms and Conditions | Does not require acceptance of Terms and Conditions |
Tape & Reel | Yes |
Thickness (mm) | 0.9 |
Width (mm) | 5 |
The device is intended to take 1 or 2 reference clocks, select between them, using a pin or register selection and generate up to 8 outputs that may be the same as the reference frequency or integer-divider versions of it.
The 8P79818 supports two output banks, each with its own divider and power supply. All outputs in one bank would generate the same output frequency, but each output can be individually controlled for output type, output enable or even powered-off.
The device supports a serial port for configuration of the parameters while in operation. The serial port can be selected to use the I2C or SPI protocol. After power-up, all outputs will come up in LVDS mode and may be programmed to other configurations over the serial port. Outputs may be enabled or disabled under control of the OE input pin.
The device can operate over the -40°C to +85°C temperature range.