概览
描述
The F1241 IF VGA featuring FlatNoise™ technology improves system SNR, especially at lower gain settings. By keeping both IP3O and NF flat while gain is backed off, the system SNR is improved significantly under high-level interferer conditions, especially when considering alias noise in an IF sampling receiver. The fast-settling, parallel mode gain step of 1.0dB coupled with the excellent differential non-linearity allows for SNR to be maximized further by targeting the minimum necessary gain in small, accurate increments. The matched output does not require a terminating resistor, thus the gain and distortion performance are preserved when driving Bandpass Anti-Alias filters.
特性
- Ideal for systems with high SNR requirements
- 20dB typical maximum gain
- 31dB gain control range
- 5-bit control
- 1.0dB gain steps
- Excellent noise figure ~ 4.0dB
- 5mm x 5mm 32-pin package
- 200Ω differential matched input
- 200Ω differential matched output
- No termination resistor required
- NF degrades < 2dB at 10dB reduced gain
- 10MHz to 500MHz frequency range
- Ultra-linear: IP3O +47dBm typical
- Excellent 2nd harmonic rejection
- Parallel control
- External current setting resistors
- Very fast settling < 15nsec
- Individual Power-Down modes
- Extremely low power consumption: 79mA/Ch
产品对比
应用
文档
相关文档
请登录后开启订阅
|
|
|
|
|---|---|---|
| 类型 | 文档标题 | 日期 |
| 数据手册 | PDF 1.91 MB | |
| 指南 | PDF 2.83 MB | |
| 产品变更通告 | PDF 39 KB | |
| 产品变更通告 | PDF 35 KB | |
| 产品变更通告 | PDF 33 KB | |
5 items
|
||
设计和开发
软件与工具
开发板与套件
评估
F1241EVBI
不推荐用于新设计
Evaluation Board for F1241 Dual Intermediate Frequency Digital Variable Gain Amplifier
The F1241EVBI is a fully populated evaluation board which allows the customer to easily evaluate the F1241 Dual Intermediate Frequency Digital Variable Gain Amplifier. Attenuation may be set using either the F1241’s parallel control input or its serial control input by setting Vmode to the...
推荐文档：
模型
ECAD 模块
点击产品选项表中的 CAD 模型链接，查找 SamacSys 中的原理图符号、PCB 焊盘布局和 3D CAD 模型。如果符号和模型不可用，可直接在 SamacSys 请求该符号或模型。
产品选项
当前筛选条件