跳转到主要内容
Pin-Configurable Dual 25A DC/DC Power Module with PMBus Interface

封装信息

CAD 模型: View CAD Model
Pkg. Type: Module
Pkg. Code: YGL
Lead Count (#): 58
Pkg. Dimensions (mm): 23.00 x 18.00 x 7.45
Pitch (mm): 1

环境和出口类别

Moisture Sensitivity Level (MSL) 3
Pb (Lead) Free Exempt
ECCN (US)
HTS (US)

产品属性

Lead Count (#) 58
Carrier Type Tray
Moisture Sensitivity Level (MSL) 3
Pb (Lead) Free Exempt
Pb Free Category Nickel/Palladium/Gold-e4
Control Type Digital
Current Sharing No
Digital Bus Yes
Input Voltage (Max) (V) 14
Input Voltage (Min) (V) 4.5
Length (mm) 23
MOQ 40
Output Current (Max) [Rail 1] (A) 25
Output Voltage (Max) (V) 5
Output Voltage (Min) (V) 0.6
POR Yes
Parametric Category Digital-Interface Power Modules
Peak Efficiency (%) 95.5
Pitch (mm) 1
Pkg. Dimensions (mm) 23.0 x 18.0 x 7.45
Pkg. Type Module
Qualification Level Standard
Quiescent Current 40 mA
SYNCH Capability Yes
Simulation Model Available iSim
Switching Frequency (KHz) 1.067 - 1.067
Switching Frequency Range (Typical) (kHz) 296 - 1067
Thickness (mm) 7.45
Width (mm) 18

描述

The RAA210925 is a pin-strap configurable dual 25A step-down PMBus-compliant DC/DC power supply module that integrates a digital PWM controller, synchronous MOSFETs, power inductor, and passive components. Only input and output capacitors are needed to finish the design. Because of its thermally-enhanced HDA packaging technology, the module can deliver up to 25A of continuous output current without the need for airflow or additional heat sinking. The RAA210925 simplifies configuration and control of Renesas digital power technology while offering an upgrade to full PMBus configuration through the pin-compatible ISL8274M. Operating across an input voltage range of 4. 5V to 14V, the RAA210925 offers adjustable output voltages down to 0. 6V and achieves up to 95. 5% conversion efficiencies. A unique ChargeMode™ control architecture provides a single clock cycle response to an output load step and can support switching frequencies up to 1067kHz. The power module integrates all power and most passive components and requires only a few external components to operate. The RAA210925 comes with a preprogrammed configuration for operating in Pin-strap mode. Output voltage, switching frequency, input UVLO, soft-start/stop delay and ramp times, tracking function, and the device SMBus address can be programmed with external pin-strap resistors. A standard PMBus interface addresses fault management, as well as real-time full telemetry and point-of-load monitoring. The RAA210925 is supported by PowerNavigator™ software, a Graphical User Interface (GUI), that can configure modules for desired solutions. The RAA210925 is available in a low profile, compact 18mm x 23mmx 7. 5mm fully encapsulated, thermally enhanced HDA package.