Rad Hard Single/Dual Phase Current Mode PWM Controller Evaluation Board
The ISL73847SEHEV2Z evaluation board benchmarks the performance of the ISL73847SEH dual-phase buck controller. The evaluation board is optimized for a 4.5V to 15V input...
概览
简介
The ISL73847SEH is a synchronous buck controller that can operate as a single or dual-phase controller. It is intended to work with the ISL73041SEH (half-bridge GaN FET driver) to generate Point-of-Load voltage rails for commercial space applications.
It accepts an input voltage range of 4.5V to 19V with a programmable output switching frequency between 250kHz and 1.5MHz with a single resistor. The output can regulate a voltage upwards of 600mV and is limited on the top end by the minimum of time and selected switching frequency.
The wide input voltage range makes it a suitable power supply option for a high-current FPGA core and other general-purpose power solutions. The ISL73847SEH uses current mode modulation which simplifies loop compensation and provides excellent power supply rejection. Additionally, the output is remotely sensed to compensate for any voltage drop in the load conditions. All of this put together results in a robust power supply solution that requires minimal components while achieving high current density.
The ISL73847SEH also features a tri-level output which provides excellent protection against faults by driving a mid-scale voltage to signal the power stage to enter a Hi-Z condition.
The ISL73847SEH operates across the military temperature range from -55 °C to +125 °C and is available in a 24 Ld hermetically sealed Ceramic Dual Flatpack (CDFP) package or in die form.
特性
- Wide operating voltage range:
- Input: 4.5V to 19V
- Output: 0.6V to VPWR_STAGE×((TSW-120ns)/TSW)
- Programmable output switching frequency
- 250kHz to 1.5MHz
- Optional droop regulation
- Current mode control provides
- Excellent power supply rejection
- Simplified control scheme
- Output differential remote sensing
- Programmable soft-start
- Enable control
- Power-good Indicator
- Radiation acceptance testing
- LDR (0.01rad(Si)/s): 75krad(Si)
- SEE hardness (see SEE report for details)
- No SEB/SEL LETTH, VDD = 25V: 86MeV•cm2/mg
- SET/SEFI free at LET 86MeV•cm2/mg
- Qualified to Renesas Rad Hard QML-V Equivalent Screening and QCI flow (R34TB0001EU)
- All screening and QCI is in accordance with MIL-PRF- 38535L Class-V
产品对比
应用
- FPGA core power supply
- General purpose power supply
文档
相关文档
请登录后开启订阅
|
|
|
|
|---|---|---|
| 类型 | 文档标题 | 日期 |
| 数据手册 | PDF 1.83 MB | |
| 技术摘要 | PDF 340 KB | |
| 手册 | PDF 5.02 MB | |
| 应用文档 | PDF 340 KB | |
| 应用文档 | PDF 357 KB | |
| 报告 | PDF 994 KB | |
| 应用文档 | PDF 414 KB | |
| 报告 | PDF 840 KB | |
| 白皮书 | PDF 533 KB | |
9 items
|
||
设计和开发
软件与工具
软件与工具
| Software title
|
Software type
|
公司
|
|---|---|---|
| iSim:PE 离线模拟工具 iSim Personal Edition（iSim:PE ）可加快设计周期并降低项目早期风险，确定可用于当前和下一代设计的部件。
|
Simulator | 瑞萨电子 |
1 item
|
||
开发板与套件
Radiation Hardened Compact 12V to 1V, 50A Capable Power Supply
The ISL73847SEHDEMO2Z demonstration board demonstrates the performance of the ISL73847SEH dual-phase buck controller. The board is optimized for a 4.5V to 15V input...
Power Management Reference Design for AMD Versal XQRVC1902
The ISLVERSALDEMO2Z demo board provides the power management for the AMD Xilinx Space Grade Versal ACAP AI Core VC1902 using Renesas' Radiation Hardened Power...
Radiation Hardened Compact 12V to 1V, 25A Capable Power Supply
The ISL73847SEHDEMO5Z demonstration board demonstrates the performance of the ISL73847SEH dual-phase buck controller in single-phase mode. The board is optimized for a...
Rad Hard Quad-Phase Current Mode PWM Controller Evaluation Board
The ISL73847SEHEV3Z evaluation board benchmarks the performance of two ISL73847SEH dual-phase buck controllers, four ISL73041SEH GaN half-bridge drivers, and twelve...
Rad Hard Quad-Phase Current Mode PWM Controller Demonstration Board
The ISL73847SEHDEMO6Z demonstration board demonstrates the performance of two ISL73847SEH dual-phase buck controllers, four ISL73041SEH GaN half-bridge drivers, and...
模型
ECAD 模块
Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on products in the Product Options table. If a symbol or model isn't available, it can be requested directly from the website.
Processing table
| CFP | Tray | 获取样片, | ||
| CFP | Tray | |||
| DIE | ||||
| Die Waffle Pack |
Tips for Using This Parametric Table:
- Hide Filters button in header: Collapse or expands filters
- Column sort buttons in header: Sort Column alphabetically / numerically descending or ascending
- Reset button in header: Reset all filters to the page default
- Full Screen button in header: Expand the table to full screen view (user must close out of full screen before they can interact with rest of page)
- Export button in header: Export the filtered results of the table to an Excel document
- Filter parts search bar in header: Type to filter table results by part number
- Hide column button in column headers: Select to hide columns in table
- AND / OR toggle switches in header: Toggles the logic of this particular filter to be “AND” or “OR” logic for filtering results
- Multiselect checkboxes at beginning of each row in table: Select these checkboxes to compare products against each other
- Document icon next to product name in row: View the featured document for this product
- Chip icon next to the right of the document icon in row: View the block diagram for this product
- Cart icon to the right of the chip icon: Indicates that samples are available for this product