封装信息
| Lead Count (#) | 24 |
| Pkg. Code | NLG24 |
| Pitch (mm) | 0.5 |
| Pkg. Type | VFQFPN |
| Pkg. Dimensions (mm) | 4.0 x 4.0 x 0.9 |
环境和出口类别
| Moisture Sensitivity Level (MSL) | 1 |
| Pb (Lead) Free | Yes |
| ECCN (US) | NLR |
| HTS (US) | 8542310001 |
产品属性
| Lead Count (#) | 24 |
| Carrier Type | Reel |
| Moisture Sensitivity Level (MSL) | 1 |
| Qty. per Reel (#) | 5000 |
| Reel Size (in) | 13 |
| Pb (Lead) Free | Yes |
| Pb Free Category | e3 Sn |
| Temp. Range | -40 to 150°C |
| Country of Assembly | Thailand |
| Country of Wafer Fabrication | Taiwan |
| Adj. Analog Gain | 12.6 - 12.6 |
| Automotive Qual. | Yes |
| Function | Thermocouple SSC |
| Input Type | Dual-thermocouple |
| Interface | SENT, I2C, ZACwire™ |
| Length (mm) | 4 |
| MOQ | 5000 |
| Package Area (mm²) | 16.0 |
| Pitch (mm) | 0.5 |
| Pkg. Dimensions (mm) | 4.0 x 4.0 x 0.9 |
| Pkg. Type | VFQFPN |
| Qty. per Carrier (#) | 0 |
| Requires Terms and Conditions | Does not require acceptance of Terms and Conditions |
| Resolution (bits) | 14 |
| Sample Rate Max (KHz) | 0.33 |
| Supply Voltage (V) | 4.5 - 5.5 |
| Tape & Reel | Yes |
| Thickness (mm) | 0.9 |
| Width (mm) | 4 |
有关 ZSSC4175 的资源
描述
The ZSSC4175 automotive sensor signal conditioner (SSC) is a member of Renesas' family of CMOS integrated circuits for highly accurate amplification and sensor-specific correction of two signals from thermocouple elements. Digital compensation of offset, sensitivity, temperature drift, and nonlinearity is accomplished via a 16-bit RISC microcontroller. Calibration coefficients and configuration data are stored in the ZSSC4175 non-volatile memory (NVM), which is reliable in automotive applications.
Measured values are provided via a digital Single Edge Nibble Transmission (SENT) interface. The SENT interface enables transmission of conditioned thermocouple data via its Fast Channel as well as transmission of supplementary data via its Serial Data Message (SDM) Channel (also referred to as the "slow" channel) using only one output pin. End-of-line calibration is also supported through this output pin via a One-Wire Interface (OWI). The ZSSC4175 and the calibration equipment communicate digitally, so the noise sensitivity is greatly reduced. Digital calibration helps keep assembly costs low as no trimming by external devices or lasers is needed.
The ZSSC4175 is optimized for automotive environments via overvoltage and reverse-polarity protection circuitry, excellent electromagnetic compatibility, and multiple diagnostic features.