特性
- Wide VIN range: 4.5V to 60V (65V abs max)
- Switching frequency range up to 200kHz
- 3-Phase drive for BLDC application
- Peak 1A/2A source/sink current with programmable drive strength
- Supports 8 adjustable levels of drive strength through hardware interface and 16 adjustable levels of drive strength through SPI interface
- Adaptive and adjustable dead time
- Fully integrated power supply architecture
- Two VCC LDOs allow for Sleep mode low IQ
- 500mA buck-boost switching regulator generates drive voltage (5V to 15V adjustable)
- 200mA adjustable output LDO for MCU supplies
- Flexible configuration
- 3-phase HI/LI mode and 3-phase PWM mode
- Support half-bridge, full-bridge configuration
- Three current sense amplifiers
- Four levels of sense gain setting
- Supports DC offset calibration during power-up and on-the-fly
- Supports both ground-side shunt sense or low-side MOSFET rDS(ON) sense
- Back-EMF sensing for BLDC sensorless operation
- Features both hardware interface and SPI interface
- Extensive fault protection functions (VCC UV, VM/VBRIDGE UV, charge pump UV, MOSFET VDS OCP, current sense OCP, thermal warning/shutdown, buck-boost current limiting, buck-boost OCP, buck-boost UV/OV)
- Supports reverse battery protection by additional external circuitry
- 7 × 7mm 48-VFQFPN package (0.5mm pitch)
描述
The RAA227063 is a smart gate driver IC for 3-phase Brushless DC (BLDC) motor applications. It integrates three half-bridge smart gate drivers that are capable of driving up to three N-channel MOSFET bridges and supports bridge voltages from 4.5V to 60V. Each gate driver supports up to 1A source and 2A sink peak drive current with programmable drive strength control.
Adjustable and adaptive dead-times are implemented to ensure robustness and flexibility. The active gate holding mechanism prevents a Miller effect-induced cross-conduction and further enhances robustness.
产品参数
| 属性 | 值 |
|---|---|
| Function | 3 Phase BLDC Driver |
| Input Voltage Range (V) | - |
| Input Voltage (Max) (V) | 65 |
| VBIAS (Max) (V) | 60 |
| Quiescent Current | 20 µA |
| ISOURCE (Max) (mA) | 1000 |
| ISINK (Max) (mA) | 2000 |
| Internal Buck Regulator | Buck Boost 500mA |
| Gate Drive (V) | 15 |
| Internal Auxiliary Power | LDO (5V or 3.3V) 200mA |
| Adaptive Dead Time | Yes |
| VOUT Slew-rate Control | Yes |
| Charge Pump | Yes |
| Intern Gain Amplifiers | 3 |
| Internal Sample & Hold | Yes |
| Input Control | HI/LI or PWM |
| Input Logic Level | 1.5V/TTL |
| Advanced Fault Protection | Yes |
| Qualification Level | Standard |
封装选项
| Pkg. Type | Pkg. Dimensions (mm) | Lead Count (#) | Pitch (mm) |
|---|---|---|---|
| QFN | 7.0 x 7.0 x 0.75 | 48 | 0.5 |
应用方框图
|
具有 NFC 身份验证和丰富连接性的高安全性药物投放系统
具有精准剂量和安全功能的药物投放系统，确保正确的药物与投放
|
|
扭矩控制系统
精密扭矩控制使用具有高精度 AFE 和可靠传感器的 MCU 确保产品质量。
|
|
高功率、设计紧凑的 BLDC 电机控制
采用智能栅极驱动器 IC 的紧凑型设计，适用于三相 BLDC，具有 GaN MOSFET 和增强的数据通信。
|
|
带旋转变压器的电机控制
旋转变压器提高了步进和 BLDC 电机系统的电机控制精度和可靠性，并降低了成本。
|
|
BLDC 牵引电机驱动
一款带有三相智能驱动器的高性能 MCU，具有高能效、可编程和传感器集成等特点。
|
|
中央真空吸尘器
BLDC 电机中央吸尘器提供能源效率和远程控制功能，以提高便利性。
|
其他应用
- E-bikes
- Battery powered tools
- Electric power steering
- Wheel chairs
- BLDC motor applications