图像
跳转至页面部分：
Back to top
概览
描述
Topics
New Release: The Embedded Target V6.04.00
From this version, we provide the Embedded Target as Commercial version or Evaluation version.
New Release: The Embedded Target V6.04.00
From this version, we provide the Embedded Target as Commercial version or Evaluation version.
We offer the above tool for co-simulation between the CS+/e² studio integrated development environment from Renesas interlinked with MATLAB® and Simulink® from the MathWorks, Inc. Among other things, this will support the validation of algorithms and model-based development by customers.
For customer who consider commercial version of the Embedded Target
We recommend that you check operating environments of the Embedded Target carefully and try the free evaluation version (limited 2 months usage) on your development environment first to check if it works properly.
This tool may not work properly under the following conditions.
- MATLAB® versions are not supported by this product.
- Specifications of Renesas MCU (such as small ROM/RAM size)
- When a size of generated codes, which are affected size and complexity of the Simulink® model, is larger than ROM size of the MCU.
- Inability to communicate due to network security settings, etc.
Again, please check operating environments of the Embedded Target carefully.
Note: MATLAB®, Simulink® are registered trademarks of The MathWorks, Inc.
特性
- Generation of code for verifying algorithms from Simulink models
- Automatic generation of Processor in the Loop Simulation (PILS) environments
- Supported MCU families: RA, RX, RL78
- What Customers Will be able to Do：Verify the functionality of code for target devices/Measure the performance of code for target devices
- Environments for evaluation through PILS are easy to construct from Model in the Loop Simulation (MILS) environments.
- Evaluation by comparing the results of MILS and PILS (back-to-back testing) is simple and reliable.
- Learn More
发布信息
发布信息
Latest Ver: V6.04.00.
Released: Feb 28, 2023
Note:
A license key is required to use the Embedded Target. Please contact the Technical Support for the license for the free evaluation version.
目标设备
Target Devices
Note
- The Embedded Target may not work properly with certain ROM/RAM size of a device and/or size and complexity of a model.
We recommend tying the free evaluation edition on your development environment first to check if it works properly. - When using Embedded Target with an RA family device, an emulator and an actual device are required to perform PILS (Processor In the Loop Simulation). In addition, additional settings are required to match the FSP version and GCC version in use. For more information, refer to FAQ in below.
FAQ: Project cannot be generated when using RA family in Embedded Target. (Embedded Target error code E300)
Synergy Download
play_circle_filled视频和培训
Reduce Time of Model-Based Development - Introduction of the Embedded Target
This video will introduce a useful software tool: Embedded Target. It can help developers reduce both testing time and costs in model-based development. Embedded Target can create an automatically configured model for the PILS environment. Next it generates a Renesas IDE project for PILS. Finally, model verification is performed by checking the execution time on an MCU or simulator.
Video List
Additional Details
Functionality
- Generation of code for verifying algorithms from Simulink models
- Automatic generation of Processor in the Loop Simulation (PILS) environments
- Supported MCU families: RA, RL78, RX
What Customers Will be able to Do
- Verify the functionality of code for target devices and
- Measure the performance of code for target devices
Other Benefits to Customers
- Environments for evaluation through PILS are easy to construct from Model in the Loop Simulation (MILS) environments.
- Evaluation by comparing the results of MILS and PILS (back-to-back testing) is simple and reliable.
Software License Agreement
| Licenses | Software License Agreement |
|---|---|
| Node-Locked License | Software License Agreement (for Node Locked License） (PDF | English, 日本語) |
Licenses for Purchasing Commercial Version of the Embedded Target
Give the part number from the list below to the distributor.
| Embedded Target for RA family Node Locked License | ||
| Period | Number of Licenses | Part Number |
|---|---|---|
| annual | 1 | RTCRA0000ET00WNJ |
| 5 | RTCRA0000ET00WNJL5 | |
| 10 | RTCRA0000ET00WNJLA | |
| Embedded Target for RL78 family Node Locked License | ||
| Period | Number of Licenses | Part Number |
|---|---|---|
| annual | 1 | RTCRL7800ET00WNJ |
| 5 | RTCRL7800ET00WNJL5 | |
| 10 | RTCRL7800ET00WNJLA | |
| Embedded Target for RX family Node Locked License | ||
| Period | Number of Licenses | Part Number |
|---|---|---|
| annual | 1 | RTCRX0000ET00WNJ |
| 5 | RTCRX0000ET00WNJL5 | |
| 10 | RTCRX0000ET00WNJLA | |
Learn More
For more information related with the Embedded Target commercial version or evaluation version, please contact a Renesas Electronics distributor, sales representative in your area or Technical Support on Renesas Web.