概述
描述
The ZSSC5101 Evaluation Kit enables configuration, offset calibration and evaluation of the ZSSC5101 xMR Sensor Signal Conditioner IC, which is designed for interfacing with magnetoresistive position sensors. The ZSSC5101 AMR Demo Board included in the kit provides a typical anisotropic magnetoresistive (AMR) position sensor for demonstrating typical calibration procedures and for reading example measurement results. Alternatively, the user module can be connected in place of the AMR Demo Board (e.g., with a tunnel magnetoresistive (TMR) or giant magnetoresistive (GMR) sensor).
Through a USB connection, the user’s PC can communicate with the ZSSC5101 via the SSC Communication Board V4.1 (requires SSC Communication Board Firmware version 4.10 or later) and the ZSSC5101 Adapter Board, which allows connecting up to two ZSSC5101 AMR Demo Boards.
For further information and support for the SSC Communication Board, visit the SSC-CB product page.
The ZSSC5101 AMR Demo Board (ZSSC5101BOARDVxPx) and SSC Communication Board (SSC-CB) can also be ordered separately.
特性
- SSC Communication Board with Firmware V4.12
- ZSSC5101 Adaptor Board
- ZSSC5101 AMR Demo Board including magnetic knob
- 3 ZSSC5101 samples
- USB Cable
应用
设计和开发
软件与工具
相关评估板和套件
开发板与套件
SSC Communication Board
The SSC Communication Board is included in Renesas' modular SSC Evaluation Kits for select sensor signal conditioner (SSC) ICs. It is also part of the modular SSC Mass Calibration System for SSC ICs. It provides communication between the user's computer and the SSC IC mounted on the SSC... 阅读详情
产品选项
| Part Number | Status | Stock | Sampleable |
|---|---|---|---|
| ZSSC5101BOARDV1P1 | Obsolete | Out of Stock | N/A |
| ZSSC5101KITV1P1 | Obsolete | In Stock | N/A |
视频和培训
A brief introduction and overview of IDT's (acquire by Renesas) sensor signal conditioner evaluation kits. Evaluation kits generally consist of three parts: a communication interface board, a device board, and a sensor simulator board - all connected together. A sophisticated software GUI accompanies the kit, enabling an engineer to learn how to use the part rapidly, do quick prototyping, and practice calibrations.
Presented by David Grice, applications engineer at IDT. For more information about IDT's sensor signal conditioner products, visit the Sensor Signal Conditioner page.
