跳转到主要内容

概览

描述

The 503 is a member of the Loco™ family, the most cost effective way to generate a high-quality, high frequency clock output from a lower frequency crystal or clock input. The name LOCO stands for Low Cost Oscillator, as it is designed to replace crystal oscillators in most electronic systems. Using Phase-Locked-Loop (PLL) techniques, the device uses a standard fundamental mode, inexpensive crystal to produce output clocks up to 160 MHz. Stored in the chip's ROM is the ability to generate nine different multiplication factors, allowing one chip to output many common frequencies (see table on page 2). This product is intended for clock generation. It has low output jitter (variation in the output period), but input to output skew and jitter are not defined or guaranteed. For applications which require defined input to output skew, use the 570B.

特性

  • Packaged as 8-pin SOIC (Pb-free) or die
  • IDT's lowest cost PLL clock
  • Generates 16.9344 MHz for stereo codecs from the 14.31818 MHz motherboard clock.
  • Can be cost effective in replacing a single surface-mount crystal
  • Can be driven by other 5xx series
  • Input crystal frequency of 5 - 27 MHz
  • Input clock frequency of 2 - 50 MHz
  • Output clock frequencies up to 160 MHz
  • Low jitter - 50 ps one sigma
  • Duty cycle of 45/55 up to 160 MHz
  • Operating voltages of 3.0 to 5.5V
  • 25 mA drive capability at TTL levels
  • Advanced, low power CMOS process

产品对比

应用

文档

设计和开发

模型

ECAD 模块

点击产品选项表中的 CAD 模型链接,查找 SamacSys 中的原理图符号、PCB 焊盘布局和 3D CAD 模型。如果符号和模型不可用,可直接在 SamacSys 请求该符号或模型。

Diagram of ECAD Models

模型

类型 文档标题 日期
模型 - IBIS ZIP 2 KB
1 项目

产品选项

当前筛选条件

支持

支持社区

支持社区

在线询问瑞萨电子工程社群的技术人员,快速获得技术支持。
浏览常见问题解答

常见问题

浏览我们的知识库,了解常见问题的解答。
提交工单

提交工单

需要咨询技术性问题或提供非公开信息吗?

支持社区

  1. Help ! I want to know the meanings of the Forward and Bias windings of the transformer. Thanks!

    看到一份iWatt公司的电源设计文档中的变压器的 一次侧有 Primary, Bias, Forward 绕组。请问行内的专家指导一下,这些 Bias, Forward 绕组 的含义是 ...

    2024年9月5日
  2. RL78/F24 的开发模型

    针对F24电机应用是否提供支持MBDT 的模型,类似NXP S32系列 MAB Guidelines - MATLAB & Simulink (mathworks.cn) 可以方便用户迅速开发,验证,集成。

    2024年9月9日
  3. RL78//F24的FOC软件(软件库)

    瑞萨是否有FOC软件(软件库),官网上只有Demo(没有可靠性输入检测,没有保护处理等)。 由于我在官网上没找到,以防万一还是找 ...

    2024年9月11日
查看所有来自 支持社区 的搜索结果 (5个)