特性
- Configurable OE pin function as OE, PPS, or DFC control function
- Proactive Power Saving (PPS) features save power during the end device power-down mode
- Dynamic Frequency Control (DFC) feature allows programming up to 4 different frequencies that switch dynamically
- Spread spectrum clock support to lower system EMI
- I²C Interface
- Supported by the Timing Commander™ software tool
描述
The 5L2503 MicroClock™ is a programmable clock generator intended for low-power, consumer, wearable, and smart devices. The 5L2503 device is a 3 PLL& architecture design. Each PLL is individually programmable, allowing for up to 3 unique frequency outputs. The 5L2503 has built-in unique features such as Proactive Power Saving (PPS) to deliver better system-level power management.
An internal OTP memory allows the user to store the configuration in the device without programming after power-up and then the device can be reprogrammed again through the I²C interface. The 5L2503 has programmable VCO and PLL source selection allowing the user to do power-performance optimization based on the application requirements. A low-power 32.768kHz clock is supported with only less than 2μA current consumption for system RTC reference clock needs.
产品对比
| 5L2503 | 5X2503 | |
| Input Type | Crystal, LVCMOS | Crystal (integrated) |
| Inputs (#) | 1 | 1 |
| Outputs (#) | 3 | 3 |
| Output Type | LVCMOS | LVCMOS |
产品参数
| 属性 | 值 |
|---|---|
| Outputs (#) | 3 |
| Output Type | LVCMOS |
| Output Freq Range (MHz) | 0.032768 - 120 |
| Input Freq (MHz) | 1 - 120 |
| Inputs (#) | 1 |
| Input Type | Crystal, LVCMOS |
| Output Banks (#) | 1 |
| Core Voltage (V) | 1.8 |
| Output Voltage (V) | 1.8 |
| Prog. Interface | I2C, OTP |
| Spread Spectrum | Yes |
封装选项
| Pkg. Type | Pkg. Dimensions (mm) | Lead Count (#) | Pitch (mm) |
|---|---|---|---|
| VFQFPN | 2.5 x 2.5 x 0.55 | 12 | 0.4 |
筛选
软件与工具
样例程序
模拟模型
A brief overview of the MicroClock™ family of tiny, flexible clock generators designed for wearable, hearable, and IoT applications.
Related Resources
Description
IDT's innovative support tool, Timing Commander™, expedites development cycles by empowering customers to program sophisticated timing devices with an intuitive and flexible Graphical User Interface. IDT's Timing Commander is a Windows™-based platform designed to serve user-friendly configuration interfaces, known as personalities, for various IDT products and product families. With a few simple clicks, the user is presented with a comprehensive, interactive block diagram offering the ability to modify desired input values, output values, and other configuration settings. The software automatically makes calculations, reports status monitors, and prepares register settings without the need to reference a datasheet. The tool also automatically loads the configuration settings over USB to an IDT evaluation board for immediate application in the circuit. Once the device has been configured and tuned for optimal system performance, the configuration file can be saved for factory-level programming before shipment. For more information about Timing Commander, visit our Timing Commander page.