特性
- 0.3ps RMS typical jitter (including spurs), 12kHz to 20MHz
- Operating modes: locked to input signal and free-run
- Digitally Controlled Oscillator (DCO) mode for software adjustment of operating frequency
- Operates from a 10MHz to 40MHz fundamental-mode crystal
- Accepts one LVPECL, LVDS, LVHSTL, HCSL, or LVCMOS input clock
- Accepts frequencies ranging from 10MHz up to 600MHz
- Clock input monitoring
- Generates 12 LVPEC/LVDS/HCSL or 24 LVCMOS output clocks
- Output frequencies ranging from 8kHz up to 1.0GHz (diff)
- Output frequencies ranging from 8kHz up to 250MHz (LVCMOS)
- Two Output Enable control inputs
- Lock and Loss-of-Signal status outputs
- Programmable output de-skew adjustments in steps as small as 16ps
- Register programmable through I²C or via external I²C EEPROM
- Bypass clock paths and reference output for system tests
- -40 °C to +85 °C ambient operating temperature
- Packaged in a 72-pin QFN, lead-free RoHS (6)
- Supported by Renesas' Timing Commander Software
描述
The 8T49N1012 has one fractional-feedback PLL that can be used for frequency synthesis. It is equipped with two integer and eight fractional output dividers, allowing the generation of up to ten different output frequencies, ranging from 8kHz to 1GHz. Eight of these frequencies are completely independent of each other and the inputs. Two more are related frequencies. The twelve outputs may select among LVPECL, LVDS, HSCL, or LVCMOS output levels.
This functionality makes it ideal to be used in any frequency synthesis application, including 1G, 10G, 40G, and 100G Synchronous Ethernet, OTN, and SONET/SDH, including ITU-T G.709 (2009) FEC rates. The device supports Output Enable inputs and Lock and LOS status outputs.
试用自定义部件配置工具。
应用
- OTN or SONET/SDH equipment line cards (up to OC-192, and supporting FEC ratios)
- Gigabit and Terabit IP switches/routers
- Wireless base station baseband
- Data communications
试用自定义部件配置工具。
| Part Number | Status | Samples | Stock | Package | Lead Count (#) | Carrier Type | Moisture Sensitivity Level (MSL) | Qty. per Reel (#) | Qty. per Carrier (#) | Pb (Lead) Free | Pb Free Category | Temp. Range (°C) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 8T49N1012-998NLGI | Obsolete | N/A | In Stock | VFQFPN | 72# | Tray | 3 | 0 | 168# | Yes | e3 Sn | -40 to 85°C |
| 8T49N1012-998NLGI8 | Obsolete | N/A | Out of Stock | VFQFPN | 72# | Reel | 3 | 2500# | 0 | Yes | e3 Sn | -40 to 85°C |
- 应用说明英语PDF 187 KB R31AN0065EU0101 Rev.1.01 2023年11月14日
- 应用说明英语PDF 157 KB R31AN0020EU0100 Rev.1.00 2022年5月16日AI 生成的摘要: EEPROM read errors on UFT3G devices occur when the SDA line's rising edge is slowed beyond 136ns due to extra loading from devices like LEDs or I2C extenders. To ensure reliable EEPROM access, adjust the pull-up resistor on the SDA line so the voltage rises from 0 to 1.8V in less than 136ns, while maintaining a low enough voltage (below 0.4V) when driven low. A 1kΩ pull-up resistor is a recommended starting point. These guidelines optimize I2C bus performance and prevent EEPROM read halts.
- 应用说明英语PDF 415 KB 2020年7月17日AI 生成的摘要: Timing considerations are critical when writing to UFT3G devices via I2C or SPI, especially regarding idle times between writes to ensure successful communication. Single-byte and block write sequences are supported, with specific idle time recommendations depending on whether PLL feedback dividers or DSM_ORD registers are modified. Calibration times vary based on crystal frequency and DLCNT settings. System implementation guidelines include disabling/enabling DPLL calibration and managing I2C wait times to avoid data corruption during frequency recalibration.
- 产品变更通告英语PDF 163 KB 2020年5月20日
- 应用说明英语
推荐文档 (1)
数据手册 (1)
No Results Found.
确保所有关键词拼写正确。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
如果您使用了筛选器,请考虑取消选择某些筛选器选项以扩大搜索结果。
- 搜索我们丰富的知识库,帮助您解答常见问题
- 前往支持论坛,获取瑞萨电子技术专家和社群的帮助
- 应用说明英语PDF 187 KB R31AN0065EU0101 Rev.1.01 2023年11月14日
- 应用说明英语PDF 157 KB R31AN0020EU0100 Rev.1.00 2022年5月16日AI 生成的摘要: EEPROM read errors on UFT3G devices occur when the SDA line's rising edge is slowed beyond 136ns due to extra loading from devices like LEDs or I2C extenders. To ensure reliable EEPROM access, adjust the pull-up resistor on the SDA line so the voltage rises from 0 to 1.8V in less than 136ns, while maintaining a low enough voltage (below 0.4V) when driven low. A 1kΩ pull-up resistor is a recommended starting point. These guidelines optimize I2C bus performance and prevent EEPROM read halts.
应用说明和白皮书 (27)
- 产品变更通告英语PDF 163 KB 2020年5月20日
- 产品变更通告英语PDF 454 KB 2019年2月08日查看更多 (7)
产品通告(产品变更、EOL 等) (7)
No Results Found.
确保所有关键词拼写正确。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
如果您使用了筛选器,请考虑取消选择某些筛选器选项以扩大搜索结果。
- 搜索我们丰富的知识库,帮助您解答常见问题
- 前往支持论坛,获取瑞萨电子技术专家和社群的帮助
No Results Found.
确保所有关键词拼写正确。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
如果您使用了筛选器,请考虑取消选择某些筛选器选项以扩大搜索结果。
- 搜索我们丰富的知识库,帮助您解答常见问题
- 前往支持论坛,获取瑞萨电子技术专家和社群的帮助
原理图和设计文件 (1)
No Results Found.
确保所有关键词拼写正确。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
如果您使用了筛选器,请考虑取消选择某些筛选器选项以扩大搜索结果。
- 搜索我们丰富的知识库,帮助您解答常见问题
- 前往支持论坛,获取瑞萨电子技术专家和社群的帮助
No Results Found.
确保所有关键词拼写正确。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
如果您使用了筛选器,请考虑取消选择某些筛选器选项以扩大搜索结果。
- 搜索我们丰富的知识库,帮助您解答常见问题
- 前往支持论坛,获取瑞萨电子技术专家和社群的帮助
No Results Found.
确保所有关键词拼写正确。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
如果您使用了筛选器,请考虑取消选择某些筛选器选项以扩大搜索结果。
- 搜索我们丰富的知识库,帮助您解答常见问题
- 前往支持论坛,获取瑞萨电子技术专家和社群的帮助
- 概览英语PDF 1.62 MB R31DS0106EU0000-7WDXRDKU4E7E-6-9407 Rev.0.00 2021年12月16日
- 产品简述英语PDF 631 KB 7WDXRDKU4E7E-6-11303 2016年5月02日
营销资料 (2)
- 技术摘要英语PDF 238 KB 7WDXRDKU4E7E-6-11137 2016年2月08日
其他 (1)
No Results Found.
确保所有关键词拼写正确。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
如果您使用了筛选器,请考虑取消选择某些筛选器选项以扩大搜索结果。
- 搜索我们丰富的知识库,帮助您解答常见问题
- 前往支持论坛,获取瑞萨电子技术专家和社群的帮助
No Results Found.
确保所有关键词拼写正确。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
如果您使用了筛选器,请考虑取消选择某些筛选器选项以扩大搜索结果。
- 搜索我们丰富的知识库,帮助您解答常见问题
- 前往支持论坛,获取瑞萨电子技术专家和社群的帮助
Renesas Boards & Kits
Evaluation Kit for 8T49N1012
The EVK-8T49N1012 evaluation board kit is a platform that is designed to help the customer evaluate Renesas's 8T49N1012 FemtoClockR NG 12-output Frequency Synthesizer. When the board is connected to a PC running Renesas' Timing CommanderTM software through USB, the device can be configured and... 阅读详情
筛选
当前筛选条件
软件与工具
按类型筛选
按供应商筛选
样例程序
按应用筛选
按功能筛选
按编译器筛选
按 IDE 筛选
模拟模型
Partner Solutions
- 软件和工具 - 其他英语
- 代码生成器中文Timing Commander™ 是一个基于 Windows™ 的创新软件平台,通过这个平台,系统设计工程师可以通过直观且灵活的图形用户界面 (GUI) 对精密的计时设备进行配置、编程和监控。
No Results Found.
确保所有关键词拼写正确。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
如果您使用了筛选器,请考虑取消选择某些筛选器选项以扩大搜索结果。
- 搜索我们丰富的知识库,帮助您解答常见问题
- 前往支持论坛,获取瑞萨电子技术专家和社群的帮助
- 软件和工具 - 其他英语
- 代码生成器中文Timing Commander™ 是一个基于 Windows™ 的创新软件平台,通过这个平台,系统设计工程师可以通过直观且灵活的图形用户界面 (GUI) 对精密的计时设备进行配置、编程和监控。
软件与工具 (4)
No Results Found.
确保所有关键词拼写正确。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
如果您使用了筛选器,请考虑取消选择某些筛选器选项以扩大搜索结果。
- 搜索我们丰富的知识库,帮助您解答常见问题
- 前往支持论坛,获取瑞萨电子技术专家和社群的帮助
模拟模型 (1)
No Results Found.
确保所有关键词拼写正确。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
如果您使用了筛选器,请考虑取消选择某些筛选器选项以扩大搜索结果。
- 搜索我们丰富的知识库,帮助您解答常见问题
- 前往支持论坛,获取瑞萨电子技术专家和社群的帮助