特性
- IO-Link compliant transceiver
- Integrated UART (COM1-3)
- One IO-Link slave up to 200mA driving current
- Programmable PNP-, NPN- and Push-Pull mode
- Auxiliary multi-purpose 200mA IO channel
- On-chip oscillator with ±2% frequency accuracy
- Reverse polarity and short circuit protection
- Two LDO voltage regulators (programmable 3.3V/5V and 5V)
- DC/DC buck converter 7V
- Temperature stable reference voltage output
- Slew rate control
- High-temperature detection
- Packages:
- QFN-24 (4.0mm x 4.0 mm)
- CSP-24 (2.6mm x 2.0 mm)
描述
The CCE4502 is a highly integrated device-side IO-Link compliant transceiver IC. The built-in hardware-based IO-Link frame handler provides full IO-Link protocol handling facilities making it simple to connect a host microcontroller via the UART interface. The comprehensive function set includes LDOs and step-down DC/DC converter, on-chip oscillators and a user SPI interface for configuration and read back of fault indicators. The output stage provides overcurrent, reverse polarity and thermal protection and is tolerant to ±40V input. It is configurable as push-pull, open drain (PMOS or NMOS) or input only.
Package options include a 4mm x 4mm, 0.5mm pitch QFN with an additional option of a 2mm x 2.6mm, 0.5mm pitch WLCSP. These options make the CC4502 suitable for demanding industrial applications where power dissipation or space are highly important.
The CCE4502 transceiver is suitable for IO-Link device applications and is compliant with the IO-Link interface and system specification Version 1.1.2 from July 2013, accessible via www.io-link.org.
For a complete end-to-end system solution, Renesas also provides the CCE4510 two-channel IO-Link Master Phy.
Benefits
- Integrated frame handler automates most of the lower layer communication tasks
- All IO-Link frame types supported
- Hardware IO-Link stack support
- Evaluation board available
- IO-Link Physical Layer Test for Evaluation Board available
- Rich configuration options
应用
- Industrial Profibus/IO-Link network
- Industrial automation
- Sensors
- Actuators
- High voltage level shifter
| Part Number | Status | Samples | Stock | Package | Carrier Type | Moisture Sensitivity Level (MSL) | Pitch (mm) | Pkg. Dimensions (mm) | Pb (Lead) Free |
|---|---|---|---|---|---|---|---|---|---|
| CCE4502 CB 5B-CSP | Obsolete | N/A | Out of Stock | CSP24 | Tape & Reel | 3 | 0.4mm | 1.98 x 2.57 x 0.53 | Yes |
| CCE4502 CB 5B-QFN | Obsolete | N/A | Out of Stock | QFN24 | Tape & Reel | 3 | 0.5mm | 4 x 4 | Yes |
| CCE4502 CC 3.3B-CSP | Obsolete | N/A | Out of Stock | CSP24 | Tape & Reel | 3 | 0.4mm | 1.98 x 2.57 x 0.53 | Yes |
| CCE4502 CC 3.3B-QFN | Obsolete | N/A | Out of Stock | QFN24 | Tape & Reel | 3 | 0.5mm | 4 x 4 | Yes |
| CCE4502 CC 3.3L-CSP | Obsolete | N/A | Out of Stock | CSP24 | Tape & Reel | 3 | 0.4mm | 1.98 x 2.57 x 0.53 | Yes |
| CCE4502 CC 3.3L-QFN | Obsolete | N/A | Out of Stock | QFN24 | Tape & Reel | 3 | 0.5mm | 4 x 4 | Yes |
| CCE4502 CC 5B-CSP | Obsolete | N/A | Out of Stock | CSP24 | Tape & Reel | 3 | 0.4mm | 1.98 x 2.57 x 0.53 | Yes |
| CCE4502 CC 5B-QFN | Obsolete | N/A | Out of Stock | QFN24 | Tape & Reel | 3 | 0.5mm | 4 x 4 | Yes |
| CCE4502 CC 5L-CSP | Obsolete | N/A | Out of Stock | CSP24 | Tape & Reel | 3 | 0.4mm | 1.98 x 2.57 x 0.53 | Yes |
| CCE4502 CC 5L-QFN | Obsolete | N/A | Out of Stock | QFN24 | Tape & Reel | 3 | 0.5mm | 4 x 4 | Yes |
| CCE4502CB3.3B-CSP | Obsolete | N/A | Out of Stock | CSP24 | Tape & Reel | 3 | 0.4mm | 1.98 x 2.57 x 0.53 | Yes |
| CCE4502CB3.3B-QFN | Obsolete | N/A | Out of Stock | QFN24 | Tape & Reel | 3 | Yes |
- 应用说明英语PDF 358 KB 2021年6月01日AI 生成的摘要: The CCE4502 supports IO-Link Device applications compliant with IO-Link Interface Specification 1.1.2. It features dual channels for IO-Link communication and optional I/O compatibility. The device integrates multiple power regulators including a 5V LDO, DC/DC regulator with buck or linear modes, and 1.8V LDO for internal logic. The DC/DC regulator outputs 7V and supplies the 3.3V/5V LDO. Buck mode enhances efficiency with external components, while linear mode requires direct connection of LEXT and VHH pins. The device includes transient voltage protection and reduces microcontroller load via an internal frame handler. Power supply design and regulator selection depend on thermal and current constraints.
- 应用说明英语PDF 130 KB 2021年6月01日AI 生成的摘要: The CCE4502 manages IO-Link protocol communication by handling frame transmission, CRC checking, and interrupt signaling to simplify MCU software. It supports automatic CRC generation and verification, status signaling via registers, and maskable interrupts for events like transmission start, reception completion, and wake-up requests. The device connects via SPI and INTX pin, enabling efficient message handling with configurable registers for different communication modes. An example flow demonstrates MCU configuration, interrupt handling, and message processing to optimize IO-Link communication.
推荐文档 (2)
数据手册 (1)
手册和指南 (1)
- 应用说明英语PDF 358 KB 2021年6月01日AI 生成的摘要: The CCE4502 supports IO-Link Device applications compliant with IO-Link Interface Specification 1.1.2. It features dual channels for IO-Link communication and optional I/O compatibility. The device integrates multiple power regulators including a 5V LDO, DC/DC regulator with buck or linear modes, and 1.8V LDO for internal logic. The DC/DC regulator outputs 7V and supplies the 3.3V/5V LDO. Buck mode enhances efficiency with external components, while linear mode requires direct connection of LEXT and VHH pins. The device includes transient voltage protection and reduces microcontroller load via an internal frame handler. Power supply design and regulator selection depend on thermal and current constraints.
- 应用说明英语PDF 130 KB 2021年6月01日AI 生成的摘要: The CCE4502 manages IO-Link protocol communication by handling frame transmission, CRC checking, and interrupt signaling to simplify MCU software. It supports automatic CRC generation and verification, status signaling via registers, and maskable interrupts for events like transmission start, reception completion, and wake-up requests. The device connects via SPI and INTX pin, enabling efficient message handling with configurable registers for different communication modes. An example flow demonstrates MCU configuration, interrupt handling, and message processing to optimize IO-Link communication.
应用说明和白皮书 (2)
产品通告(产品变更、EOL 等) (1)
勘误表和技术更新 (1)
No Results Found.
确保所有关键词拼写正确。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
如果您使用了筛选器,请考虑取消选择某些筛选器选项以扩大搜索结果。
- 搜索我们丰富的知识库,帮助您解答常见问题
- 前往支持论坛,获取瑞萨电子技术专家和社群的帮助
No Results Found.
确保所有关键词拼写正确。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
如果您使用了筛选器,请考虑取消选择某些筛选器选项以扩大搜索结果。
- 搜索我们丰富的知识库,帮助您解答常见问题
- 前往支持论坛,获取瑞萨电子技术专家和社群的帮助
No Results Found.
确保所有关键词拼写正确。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
如果您使用了筛选器,请考虑取消选择某些筛选器选项以扩大搜索结果。
- 搜索我们丰富的知识库,帮助您解答常见问题
- 前往支持论坛,获取瑞萨电子技术专家和社群的帮助
No Results Found.
确保所有关键词拼写正确。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
如果您使用了筛选器,请考虑取消选择某些筛选器选项以扩大搜索结果。
- 搜索我们丰富的知识库,帮助您解答常见问题
- 前往支持论坛,获取瑞萨电子技术专家和社群的帮助
No Results Found.
确保所有关键词拼写正确。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
如果您使用了筛选器,请考虑取消选择某些筛选器选项以扩大搜索结果。
- 搜索我们丰富的知识库,帮助您解答常见问题
- 前往支持论坛,获取瑞萨电子技术专家和社群的帮助
营销资料 (1)
No Results Found.
确保所有关键词拼写正确。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
如果您使用了筛选器,请考虑取消选择某些筛选器选项以扩大搜索结果。
- 搜索我们丰富的知识库,帮助您解答常见问题
- 前往支持论坛,获取瑞萨电子技术专家和社群的帮助
No Results Found.
确保所有关键词拼写正确。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
如果您使用了筛选器,请考虑取消选择某些筛选器选项以扩大搜索结果。
- 搜索我们丰富的知识库,帮助您解答常见问题
- 前往支持论坛,获取瑞萨电子技术专家和社群的帮助