封装信息
| CAD 模型: | View CAD Model |
| Pkg. Type: | PDIP |
| Pkg. Code: | EKP |
| Lead Count (#): | 28 |
| Pkg. Dimensions (mm): | 35.56 x 13.97 x 4.06 |
| Pitch (mm): | 2.54 |
环境和出口类别
| Pb (Lead) Free | No |
| ECCN (US) | EAR99 |
| HTS (US) | 8542.39.0090 |
| Moisture Sensitivity Level (MSL) |
产品属性
| Lead Count (#) | 28 |
| Carrier Type | Tube |
| Pb (Lead) Free | No |
| Temp. Range (°C) | 0 to +70°C |
| Channels (#) | 16 |
| Charge Injection (pC) | 15 |
| Configuration | 2 x 8:1 |
| Drain Capacitance | 30 |
| IS (mA) | 1.5 |
| Leakage (nA) | 0.3 |
| Length (mm) | 35.6 |
| MOQ | 286 |
| Pitch (mm) | 2.5 |
| Pkg. Dimensions (mm) | 35.6 x 14.0 x 4.06 |
| Pkg. Type | PDIP |
| Qualification Level | Standard |
| RDS (ON) (Ohms) | 180 |
| Source Cap (pf) | 10 |
| Supply Voltage Vcc Range | ±15 (Typ) |
| Switch or MUX | MUX |
| TOFF (ns) | 250 |
| TON (ns) | 250 |
| Thickness (mm) | 4.06 |
| VCC (Single) (V) | 20 - 20 |
| Width (mm) | 14 |
有关 HI-507 的资源
描述
Support is limited to customers who have already adopted these products.
The HI-506/HI-507 and HI-508/HI-509 monolithic CMOS multiplexers each include an array of sixteen and eight analog switches respectively, a digital decoder circuit for channel selection, voltage reference for logic thresholds, and an enable input for device selection when several multiplexers are present. The Dielectric Isolation (DI) process used in fabrication of these devices eliminates the problem of latchup. DI also offers much lower substrate leakage and parasitic capacitance than conventional junction isolated CMOS (see Application Note AN520). The switching threshold for each digital input is established by an internal +5V reference, providing a guaranteed minimum 2. 4V for logic 1 and maximum 0. 8V for logic 0. This allows direct interface without pullup resistors to signals from most logic families: CMOS, TTL, DTL and some PMOS. For protection against transient overvoltage, the digital inputs include a series 200Ω resistor and diode clamp to each supply. The HI-506 is a single 16-channel, the HI-507 is an 8-channel differential, the HI-508 is a single 8-channel and the HI-509 is a 4-channel differential multiplexer. If input overvoltages are present, the HI-546/HI-547/HI-548/ HI-549 multiplexers are recommended.