特性
- Rail-to-rail inputs and outputs
- CMRR at VCM = 0.1V beyond VS: 135dB, typ
- VOH and VOL: 10mV from VS, typ
- No 1/f noise corner down to 0.1Hz
- Input noise voltage: 10 nV/√Hz at 1kHz
- 0.1Hz to 10Hz noise voltage: 250nVP-P
- Low offset voltage: 2.5µV, Max
- Superb offset drift: 15nV/°C, Max
- Single supply: 2.25V to 6.0V
- Dual supply: ±1.125V to ±3.0V
- Low ICC: 675µA, typ
- Wide bandwidth: 3.5MHz
- Operating temperature range
- Industrial: -40°C to +85°C
- Full industrial: -40°C to +125°C
- Packaging
- Single: SOIC, SOT-23
描述
The ISL28134 is a single, chopper-stabilized zero drift operational amplifier optimized for single and dual supply operation from 2. 25V to 6. 0V and ±1. 125V and ±3. 0V. The ISL28134 uses auto-correction circuitry to provide very low input offset voltage, drift and a reduction of the 1/f noise corner below 0. 1Hz. The ISL28134 achieves ultra low offset voltage, offset temperature drift, wide gain bandwidth and rail-to-rail input/output swing while minimizing power consumption. The ISL28134 is ideal for amplifying the sensor signals of analog front-ends that include pressure, temperature, medical, strain gauge and inertial sensors down to the µV levels. The ISL28134 can be used over standard amplifiers with high stability over the industrial temperature range of -40°C to +85°C and the full industrial temperature range of -40°C to +125°C. The ISL28134 is available in an industry standard pinout SOIC and SOT-23 packages.
产品参数
| 属性 | 值 |
|---|---|
| Channels (#) | 1 |
| Temp. Range (°C) | -40 to +85°C, -40 to +125°C |
| Bandwidth (MHz) | 3.5 |
| IBIAS (nA) | 0.12 |
| IS per Amp (mA) | 0.675 |
| Offset Voltage (Max) (mV) | 0.0025 |
| Slew Rate (V/µs) | 1.5 |
| Rail-to-Rail Input | Yes |
| Rail-to-Rail Output | Yes |
| Single Supply Voltage Range (V) | - |
| Gain Min | 1 |
| IOUT (A) | 0.065 |
| Noise VN (nV/√Hz) | 8 |
| AVOL (dB) | 125 |
| CMRR (dB) | 135 |
| PSRR (db) | 135 |
| Enable | No |
| Topology [Rail 1] | VFA |
| VS (Min) (V) | 2.25 |
| VS (Max) (V) | 6 |
| Thermal Shutdown | No |
| Simulation Model Available | iSim |
应用方框图
|
唱盘系统
这款唱盘系统采用低功耗 MCU 和 RIAA 前置放大器，可实现精确的电机和音频控制。
|
|
光伏（PV）电弧检测系统
实时 PV 电弧检测系统能够快速、准确地识别故障，将火灾风险降至最低。
|
|
工业用嵌入式可编程逻辑控制器（PLC）
灵活的嵌入式可编程逻辑控制器（PLC），旨在集成任何类型的接口以满足终端应用需求。
|
|
可连接 EtherCAT 和 CAN 的质量流量控制器
质量流量控制器（MFC）可以进行质量和流量测量，可用于控制半导体制造设备中的燃气。
|
|
工业电子阀门控制器
工业电子阀提供精确、符合 SIL2 标准的控制。
|
|
智能电网故障指示器单元
低功耗智能电网故障指示器，具有高性能 MCU 和高效监控功能。
|
其他应用
- Medical instrumentation
- Sensor gain amps
- Precision low drift, low frequency ADC drivers
- Precision voltage reference buffers
- Thermopile, thermocouple, and other temperature sensors
- front-end amplifiers
- Inertial sensors
- Process control systems
- Weight scales and strain gauge sensors