概览
描述
The R8C/13 Group is supported only for customers who have already adopted these products. The RL78/G14 Group is recommended for new designs.
This MCU is built using the high-performance silicon gate CMOS process using a R8C/Tiny Series CPU core and is packaged in a 32-pin plastic molded LQFP. This MCU operates using sophisticated instructions featuring a high level of instruction efficiency. With 1Mb of address space, it is capable of executing instructions at high speed. The data flash ROM (2KB X 2 blocks) is embedded.
产品对比
应用
设计和开发
软件与工具
软件与工具
| Software title
|
Software type
|
公司
|
|---|---|---|
| M3T-MR30/4 Real-time OS for M16C Series and R8C Family μITRON4.0 Specification real-time OS for M32C/80, M16C/80 Series [Required IDE :High-performance Embedded Workshop]
|
ITRON OS | 瑞萨电子 |
| Peripheral Driver Generator A tool for automatically generating drivers for the built-in peripheral I/Os of a microcomputer (for RX210, RX220, RX63x, and RX62x)
|
Code Generator | 瑞萨电子 |
| C/C++ Compiler Package for R8C and M16C Families C/C++ Compiler Package for R8C Family and M16C Family (R32C/M32C/M16C) , * Packed the following three compiler packages : [Content] C Compiler Package for R32C Series, C Compiler Package for M32C Series [M3T-NC308WA], and C/C++ Compiler Package for M16C Series and R8C Family [M3T-NC30WA]. They are bundled with the simulator debugger and High-performance Embedded Workshop.
|
Compiler/Assembler | 瑞萨电子 |
| MISRA C Rule Checker SQMlint MISRA C Rule Checker (option)
|
Compiler/Assembler | 瑞萨电子 |
| High-performance Embedded Workshop Renesas integrated development environment (IDE) (for SuperH, RX, R8C, M32R, M16C, H8SX, H8S, H8, and 740 families).
|
IDE and Coding Tool | 瑞萨电子 |
| Flash Development Toolkit (Programming GUI) Flash memory programming software. [Support MCU/MPU and devices: SuperH RISC engine, RX, R8C, M16C, H8SX, H8S, H8, 740]
|
Programmer (Unit/SW) | 瑞萨电子 |
| Simulator Debugger for M16C Series and R8C Family Simulator Debugger for M16C/60, M16C/30, M16C/Tiny, M16C/20, M16C/10 Series and R8C Family [Support IDE : High-performance Embedded Workshop] (Note: This product is included in Compiler Package and is not available separately.)
|
Simulator | 瑞萨电子 |
|
7 项目
|
||
样例程序
模型
ECAD 模块
点击产品选项表中的 CAD 模型链接，查找 SamacSys 中的原理图符号、PCB 焊盘布局和 3D CAD 模型。如果符号和模型不可用，可直接在 SamacSys 请求该符号或模型。
产品选项
当前筛选条件
支持
资源
常见问题
-
(时钟,电特性) R8C/10群 ~ R8C/1B群的内部振荡器的振荡稳定时间为多久？
低速内部振荡器的振荡稳定时间如下：■125kHz时，为16us (Typ.)。 高速内部振荡器的振荡稳定时间如下：■R8C/11群、R8C/13群 5V、25℃、HR1=40h时 ...
2006年7月27日 -
用M16C闪存启动器对内部闪存编程时没有在ID代码区设值，ID代码区会写入什么？下一次重编程时要输入何值来验证ID代码？
When programming the on-chip Flash memory without setting a value in the ID code area, the M16C Flash Starter will set "FF FF FF FF FF FF FF" in the ID code area. Therefore, the next time you reprogram the Flash memory, input [all "FFh"] to verify the ID ...
2008年2月14日 -
用M16C闪存Starter对内部闪存编程写入。第一次全输入00h的ID码时OK。其后同样操作却有不匹配ID错。怎么办？
使用M16C Flash Starter输入的ID码用于与MCU的ID码进行验证，验证通过后才允许访问。MCU的ID码随内部闪存的改写而变化。因此，对内 ...
2008年2月14日