跳转到主要内容
注意 - 建议使用以下设备作为替代品:
RAJ240057DNP - 2 节至 4 节串联锂离子电池电量计 IC
RAJ240047DNP is not recommended for new designs.

概览

描述

RAJ240047 is Renesas battery management IC which incorporates a variety of battery fuel gauge features. Embedded Renesas RL78 CPU core has multiple low power modes and achieve high performance in ultra-low power operation. This product consists of MCU device and AFE device in a single package. Fuel gauge control firmware is stored in embedded flash memory and controls embedded analog and digital circuits to execute battery voltage / current / temperature measurement, remaining capacity estimation, over current / voltage / temperature protection and other battery management operations.

特性

  • Fully integrated battery management product including battery capacity measurement and protection.
  • Supports 2-4 Li-Ion or Li-Polymer battery cells in series.
  • Ultra-low power Renesas RL78 CPU core
  • Built-in flash memory (block erase/write protection) · Flash ROM: 128KB · Data flash: 4 KB
  • Internal SRAM: 5.5 KBCurrent integrating circuit (18-bit ΔΣA/D)
  • 15-bit ΔΣA/D converter (external 3 channels, internal 5 channels including simple temperature sensor)
  • High side N-ch FET control circuit for charge and discharge current protection
  • Overcurrent detection circuit (discharge short-circuit current (2 channels), charge/discharge overcurrent, and wake-up current)
  • Battery voltage detection circuit (4 cells)
  • Battery cell conditioning circuit (4 cells)
  • Pack+ terminal voltage detection circuit
  • FUSE control circuit
  • MCU built-in High-Speed on-chip clock generator
  • AFE on-chip oscillator clock (4.194 MHz)
  • MCU runaway detection circuit
  • MCU build-in watchdog timer
  • Series regulator (VREG2: 3.3 V, VREG1: 1.8 V)
  • Reset circuit (VREG2, VREG1 monitoring)
  • MCU low power modes : HALT and STOP
  • High-Speed on-chip clock oscillator · High-Speed operation :1 to 32 MHz · Low speed operation :1 to 8 MHzI/O port: 12 · CMOS input/output: 6 · CMOS input: 2 · N-ch open drain: 2 · High voltage input: 1 · High voltage output: 1
  • Serial interface: · I2C · UART · Simplified I2C
  • MCU 16-bit timer: 5 channels
  • MCU 12-bit interval timer: 1 channel
  • AFE timer (setting range: 125 ms to 64 s)
  • 8 bits PWM signal generator
  • Intel® Dynamic Battery Power Technology support
  • Impedance measurement circuit
  • Built-in on-chip debug function
  • Self programming function support
  • Power supply voltage: VCC = 4.0 to 25 V
  • Operation ambient temperature: Ta = -20 to +85°C
  • Package Information:
  • Plastic mold QFN (4mm x 4mm x 0.95mm)

产品对比

应用

文档

类型 文档标题 日期
数据手册 PDF 2.57 MB
宣传手册 PDF 1.11 MB
工具新闻 - 注意事项 PDF 29 KB 日本語
传单 PDF 345 KB English , 日本語
产品变更通告 PDF 4.86 MB 日本語
产品变更通告 PDF 3.74 MB 日本語
产品变更通告 PDF 1.46 MB 日本語
应用说明 PDF 509 KB
应用说明 PDF 397 KB
9 项目

设计和开发

模型

ECAD 模块

点击产品选项表中的 CAD 模型链接,查找 SamacSys 中的原理图符号、PCB 焊盘布局和 3D CAD 模型。如果符号和模型不可用,可直接在 SamacSys 请求该符号或模型。

Diagram of ECAD Models

产品选项

当前筛选条件

支持

支持社区

支持社区

在线询问瑞萨电子工程社群的技术人员,快速获得技术支持。
浏览常见问题解答

常见问题

浏览我们的知识库,了解常见问题的解答。
提交工单

提交工单

需要咨询技术性问题或提供非公开信息吗?