封装信息
| Pkg. Code | pkg_8307 |
| Pitch (mm) | 0.65 |
| Lead Count (#) | 8 |
| Pkg. Type | TSSOP |
| Pkg. Dimensions (mm) | 4.4 x 3.15 x 1.2 |
环境和出口类别
| ECCN (US) | 3A001Xa |
| Pb (Lead) Free | Yes |
| Moisture Sensitivity Level (MSL) | |
| HTS (US) |
产品属性
| Carrier Type | Embossed Tape |
| Country of Assembly | Malaysia |
| Country of Wafer Fabrication | Japan |
| Automotive Qual. | Yes |
| Bandwidth (MHz) | 0.5 |
| CMRR (dB) | 85 |
| Channels (#) | 2 |
| Common Mode Input Voltage Range (V) | 3 - 30 |
| Common Mode Input Voltage Range Vicm (Hi Side) ( Ref Only) | V＋ -1.5 |
| Common Mode Input Voltage Range Vicm (Low Side) (Ref Only) | 0 |
| Dual Supplies (±V) | 15 - 15 |
| Dual Supply Range (±V) | V+-15V(Max.) |
| Enable | - |
| Family Name | General-purpose Op Amps |
| Function | Automotive Grade High Voltage Bipolar Dual Operational Amplifier Low Input Offset Voltage VIO max1mV |
| GBA (Ref. Only) (MHz) | 0.5 |
| Gain Min | 25000 |
| IBIAS (nA) | 14 |
| IN/OUT Full Range | No |
| IOUT (A) | 0.02 |
| IS (mA) | 0.7 |
| IS per Amp (mA) | 0.35 |
| Input Offset Voltage Vio (Max) (mV (±)) | 1 |
| Lead Compliant | No |
| Lead Count (#) | 8 |
| Length (mm) | 4.4 |
| MOQ | 2500 |
| Min Operating Temperature (°C) | -40 |
| Offset Voltage (Max) (mV) | 1 |
| Output Voltage Swing Range (V) | 0 - V+-1.6 |
| Pb (Lead) Free | Yes |
| Pb Free Category | Yes |
| Pitch (mm) | 0.65 |
| Pkg. Dimensions (mm) | 4.4 x 3.15 x 1.2 |
| Pkg. Type | TSSOP |
| Process | Bipolar |
| Qty. per Reel (#) | 2500 |
| Qualification Level | Automotive(AEC-Q100 Compliant) |
| Rail-to-Rail Input | No |
| Rail-to-Rail Output | No |
| Simulation Model Available | SPICE |
| Single Supply Voltage Range (V) | 3 - 30 |
| Slew Rate (V/µs) | 0.3 |
| Supply Current Icc/Idd (Max) (mA) | 1.4 |
| Supply Voltage Vcc Range | 3 - 30 |
| Tape & Reel | Yes |
| Temp. Range | -40 to +125°C |
| Thermal Shutdown | No |
| Thickness (mm) | 1.2 |
| Topology [Rail 1] | - |
| VS (Max) (V) | 30 |
| VS (Min) (V) | 3 |
| Width (mm) | 3.15 |
描述
REAC1251J 是一款单电源双通道运算放大器，具有低输入偏置电压 VIO ≤ ±1mV 和低输入偏置电压温度漂移（Ta = -40°C 至 +125°C）。 其特点包括低压操作、V−（GND）电平范围的共模输入电压、由 Class C 推挽电路的输出级确定的 V−（GND）电平输出和 50μA（典型值）恒定电流以及低电流消耗。
除此之外，该放大器能够在正负电源下运行，且可广泛应用于各类放大器电路。