跳转到主要内容

特性

  • Optimized for Telecommunications Equipment, High‑performance Enterprise Computing, Motor Drives
  • 50mΩ RDSON
  • Maximum Continuous Current: 3A
  • Wide Operating Supply Voltage: 4.5V to 22V
  • Back-to-Back FET Reverse-current Blocking, when OFF
  • Automatic nFET SOA Protection
  • Four-level, Pin-selectable VIN Overvoltage Lockout
  • Capacitor-adjustable Inrush Current Control
  • Two-stage Current Limit Protection:
    • Resistor-adjustable Active Current Limit
    • Fixed 0.5A Short-circuit Current Limit
  • ON-OFF Control: Active HIGH

描述

The SLG59H1005V is a high‑performance, self‑powered 50mΩ NMOS load switch with back-to-back reverse‑current blocking designed for all 4.5V to 22V power rails up to 3A. Using a proprietary MOSFET design, the SLG59H1005V achieves a stable 50mΩ RDSON across a wide input voltage range. In combining novel FET design and copper pillar interconnects, the SLG59H1005V package also exhibits a low thermal resistance for high‑current operation. Designed to operate over a -40 °C to 85 °C range, the SLG59H1005V is available in a low thermal resistance, RoHS‑compliant, 1.6mm x 3.0mm STQFN package.

产品参数

属性
FET Pass Device Type Single N-Channel
VIN Channel 1 min. (V) 4.5
VIN Channel 1 max. (V) 22
RDSON (Typ) Channel 1 (mΩ) 50
IDS Channel 1 (A) 3
Enable Active High
Output Voltage Slew Rate set by Capacitor
Discharge Circuit No
Undervoltage Protection Yes
Over Voltage Protection Yes
Power Good (PG), FAULT indicator FAULT
Reverse current blocking Yes
Reverse voltage detection No
Over Current Protection (OCP) Adjustable
Over Current Protection Setting Range Channel 1 1 - 3
Short Circuit Protection Yes
Over Temperature Protection (OTP) Yes
Current Monitor Output Yes
Internal TVS Surge Protection No
Temp. Range (°C) -40 to +85°C

封装选项

Pkg. Type Pkg. Dimensions (mm) Lead Count (#) Pitch (mm)
STQFN-18 1.6 x 3.0 mm 18 0.4

应用方框图

EV Charger Wall Box with High-End HMI Block Diagram
具有高端 HMI 的电车充电器壁挂式充电盒
多功能电车充电器提供 1 至 3 相选项,具有 IoT 连接和高级计量功能。
Multi-Cell USB PD Power Bank with Quick Charge 2.0/3.0 Block Diagram
多芯 USB PD 移动电源,配备 Quick Charge 2.0/3.0
60W+ USB PD 移动电源通过多电池设置和蓝牙 LE 监控提供高效充电。

其他应用

  • Power-Rail Switching
  • Multifunction Printers
  • Large-format Copiers
  • Telecommunications Equipment
  • High-performance Computing 4.5V and 22V Point‑of‑Load Power Distribution
  • Motor Drives

当前筛选条件