跳转到主要内容

特性

  • Integrated 1.5A Continuous IDS nFET Load Switch
  • Integrated Low RDSON nFET switch: 70mΩ
  • Input Voltage: 2.7V to 5.5V
  • Operating Temperature: -40 °C to 85 °C
  • Resistor-adjustable Active Current Limit
  • ±10% accuracy for 0.27A to 1.81A Current Limit
  • Thresholds
  • ±15% accuracy for < 0.27A Current Limit Thresholds
  • Open Drain FLT Signaling
  • Input Over-Voltage Protection
  • Absolute VIN maximum voltage rating: 28VDC
  • Over-temperature Protection
  • Under-Voltage Lockout
  • True Reverse-Current Blocking
  • Active Low ON signal control

描述

The SLG59H1342C is a self-powered, high-performance 70mΩ nFET load switch designed for high-side power rail applications up to 1.5A. When ON, its internal reverse-current protection quickly opens the switch if a reverse-voltage condition is detected (VOUT > VIN + 50mV). When OFF, an internal back-to-back reverse-current blocking circuit prevents reverse path leakage current.

产品参数

属性
FET Pass Device Type Single N-Channel
VIN Channel 1 min. (V) 2.7
VIN Channel 1 max. (V) 5.5
RDSON (Typ) Channel 1 (mΩ) 70
IDS Channel 1 (A) 1.5
Enable Active Low
Output Voltage Slew Rate set by Internally Fixed
Discharge Circuit No
Undervoltage Protection Yes
Over Voltage Protection Yes
Power Good (PG), FAULT indicator FAULT
Reverse current blocking Yes
Reverse voltage detection Yes
Over Current Protection (OCP) Adjustable
Over Current Protection Setting Range Channel 1 0.16 - 1.81
Short Circuit Protection No
Over Temperature Protection (OTP) Yes
Current Monitor Output No
Internal TVS Surge Protection No
Temp. Range (°C) -40 to +85°C

封装选项

Pkg. Type Pkg. Dimensions (mm) Lead Count (#)
WLCSP-9 1.21 x 1.21 mm 9

应用

  • Fast Turn On/Off power rail switching
  • Frequent wake & sleep power cycle
  • Mobile devices and portable devices

当前筛选条件