The ISL6227 dual PWM controller delivers high efficiency precision voltage regulation from two synchronous buck DC/DC converters. It was designed especially to provide power regulation for DDR memory, chipsets, graphics and other system electronics in Notebook PCs. The ISL6227's wide input voltage range capability allows for voltage conversion directly from AC/DC adaptor or Li-Ion battery pack. Automatic mode transition of constant-frequency synchronous rectification at heavy load, and hysteretic (HYS) diode-emulation at light load, assure high efficiency over a wide range of conditions. The HYS mode of operation can be disabled separately on each PWM converter if constant-frequency continuous-conduction operation is desired for all load levels. Efficiency is further enhanced by using the lower MOSFET rDS(ON) as the current sense element. Voltage-feed-forward ramp modulation, current mode control, and internal feedback compensation provide fast response to input voltage and load transients. Input current ripple is minimized by channel-to-channel PWM phase shift of 0°, 90° or 180° (determined by input voltage and status of the DDR pin). The ISL6227 can control two independent output voltages adjustable from 0. 9V to 5. 5V, or by activating the DDR pin, transform into a complete DDR memory power supply solution. In DDR mode, CH2 output voltage VTT tracks CH1 output voltage VDDQ. CH2 output can both source and sink current, an essential power supply feature for DDR memory. The reference voltage VREF required by DDR memory is generated as well. In dual power supply applications the ISL6227 monitors the output voltage of both CH1 and CH2. An independent PGOOD (power good) signal is asserted for each channel after the soft-start sequence has completed, and the output voltage is within PGOOD window. In DDR mode CH1 generates the only PGOOD signal. Built-in overvoltage protection prevents the output from going above 115% of the set point by holding the lower MOSFET on and the upper MOSFET off. When the output voltage re-enters regulation, PGOOD will go HIGH and normal operation automatically resumes. Once the soft-start sequence has completed, undervoltage protection latches the offending channel off if the output drops below 75% of its set point value. Adjustable overcurrent protection (OCP) monitors the voltage drop across the rDS(ON) of the lower MOSFET. If more precise current-sensing is required, an external current sense resistor may be used.
日期 | ||
---|---|---|
PDF 1.44 MB | 数据手册 | |
PDF 5.51 MB 日文 | 手册 | |
PDF 603 KB | End Of Life Notice | |
PDF 326 KB | 产品变更通告 | |
PDF 295 KB | 白皮书 | |
PDF 456 KB | 手册 - 开发工具 | |
PDF 294 KB | 产品变更通告 | |
PDF 268 KB | 产品变更通告 | |
PDF 106 KB | 产品变更通告 | |
PDF 173 KB | 产品变更通告 | |
PDF 248 KB | 产品变更通告 | |
PDF 509 KB | 应用文档 | |
PDF 397 KB | 应用文档 | |
PDF 669 KB | 手册 - 开发工具 | |
14 items
|
Software title
|
Software type
|
公司
|
---|---|---|
iSim:PE Offline Simulation Tool iSim Personal Edition (iSim:PE) speeds the design cycle and reduces risk early in any project, identifying parts that can be used in current as well as next-generation designs.
|
Simulator | 瑞萨电子 |
1 item
|
Schematic symbols, PCB footprints, and 3D CAD models from SamacSys can be found by clicking on products in the Product Options table. If a symbol or model isn't available, it can be requested directly from the website.
选择下单器件型号:
下单器件型号 | 样片 |
---|---|
ISL6227CAZ | Availability |
ISL6227CAZ-T | Availability |
ISL6227IAZ | Availability |
ISL6227IAZ-T | Availability |
ISL6227IRZ | Availability |
ISL6227IRZ-T | Availability |