概览
描述
作为可与E2、E2 Lite 片上调试仿真器连接使用的 CPU 板，此款产品可以对目标 MCU 实现简单易行的评测。
特性
- 包含 RL78/F24 (R7F124FPJ)
- 装配有 4MHz 谐振器和 32.768kHz 谐振器
- 配备通用区域（2.54 mm 间距）
- 支持闪存编程和片上调试（使用 TOOL0 引脚）
- 高度可扩展；外设板连接器配有微控制器引脚
应用
文档
相关文档
请登录后开启订阅
|
|
|
|
|---|---|---|
| 类型 | 文档标题 | 日期 |
| 手册 - 开发工具 | RL78/F24 Target Board RTK7F124FPC01000BJ User's Manual Rev.1.01
|
|
| 应用说明 |
PDF
813 KB
日本語
This application note describes how to write the program to the internal flash memory of the RL78 MCUs that supports the RL78 Protocol D by the Raspberry Pi 4 Model B+. Serial programming of the RL78 Protocol D is used for writing. The Raspberry Pi is used as a programmer; the program rewriting file is executed to send the rewrite data for the write operation.
|
|
| 应用说明 |
PDF
1.69 MB
日本語
This application note describes how to write the program to the internal flash memory of the RL78 MCUs that supports the RL78 Protocol D. Serial programming of the RL78 Protocol D is used for writing. There are two modes: Online Mode, in which the host PC sends commands to perform rewriting, and Offline Mode, in which the data to be rewritten is downloaded from the host PC in advance and rewriting is triggered by pressing a switch.
|
|
| 应用说明 |
PDF
456 KB
AI 生成的摘要:
The CAN driver for RL78/F24 supports CAN-FD communication with a single-channel RS-CANFDLite controller. It integrates with the IAR development environment and Renesas E2 debugger for debugging and self-test operations. Hardware requirements include using the RL78/F24 controller with a 20 MHz external quartz or PLL for clock accuracy, a 5V power supply, and proper jumper and CAN bus termination settings. The software architecture includes SmartConfigurator-generated drivers, upper driver APIs, and monitor programs for interactive CAN self-tests. The package includes configuration files, source code, and project files compatible with IAR EW 5.10.1 or higher. The document references detailed manuals and tools for setup and debugging.
|
|
4 项目
|
||
设计和开发
软件与工具
软件与工具
| Software title
|
Software type
|
公司
|
|---|---|---|
| E2 emulator [RTE0T00020KCE00000R] On-chip debugging emulator. Also available as a flash memory programmer. [Support MCU/MPU: RA, RE, RH850, R-Car D1, RL78, RX, RISC-V MCU]
|
Emulator | 瑞萨电子 |
| E2 emulator Lite [RTE0T0002LKCE00000R] On-chip debugging emulator. Also available as a flash memory programmer. [Support MCU/MPU: RA, RE, RL78, RX, RISC-V MCU]
|
Emulator | 瑞萨电子 |
2 项目
|
||
样例程序
样例程序
筛选
|
||
|---|---|---|
| 类型 | 文档标题 | 日期 日期 |
| 示例代码 | RL78 Family Flash programmer with Raspberry Pi (RL78 Protocol D) Rev.1.00
This application note describes how to write the program to the internal flash memory of the RL78 MCUs that supports the RL78 Protocol D by the Raspberry Pi 4 Model B+. Serial programming of the RL78 Protocol D is used for writing. The Raspberry Pi is used as a programmer; the program rewriting file is executed to send the rewrite data for the write operation.
|
|
| 示例代码 | RL78 Family RL78 Flash Programmer (RL78 Protocol D) Rev.1.00
This application note describes how to write the program to the internal flash memory of the RL78 MCUs that supports the RL78 Protocol D. Serial programming of the RL78 Protocol D is used for writing. There are two modes: Online Mode, in which the host PC sends commands to perform rewriting, and Offline Mode, in which the data to be rewritten is downloaded from the host PC in advance and rewriting is triggered by pressing a switch.
|
|
| 示例代码 | RL78/F24 CAN Driver and CAN Self-Test Rev.0.90
应用:
汽车
Function:
CAN
IDE:
IAR EWRL78
|
|
| 示例代码 | ZIP 22 KB | |
4 项目
|
||
产品选项
| 器件号 | 状态 | 库存 | 预算价格（美元） | Sampleable | Pb (Lead) Free | ECCN (US) | HTS (US) | RoHS Compliant | China RoHS Compliant |
|---|---|---|---|---|---|---|---|---|---|
| RTK7F124FPC01000BJ | Active | 有库存 | 1u | $82.35 | Available | No | 3A991.a.2 | 8471.50.0150 | No | No |
视频和培训
支持
ROM Ordering
Embed your custom code into Renesas masked MCUs during manufacturing for tailored device functionality.
