特性
- Pin compatible and function/feature compatible with the D2 Audio DSP D2-3 family device
- All digital Class-D amplifier controller
- Full 5.1/7.1/9.1-channel amplifier platform support
- Enhanced audio processing decoders
- D2 Audio DSP sound enhancement algorithm and virtualization
- Expanded on-chip memory capacity
- 12 channels of Digital Signal Processing (DSP) including equalizers, filters, mixers and other common audio processing blocks
- Fully configurable and routable audio signal paths
- Flexible audio input and output configurations
- Embedded 8-channel sample rate converter
- Sample rates from 32kHz up to 192kHz
- Supports bridged, half-bridged, and Bridge-Tied Load (BTL) topologies, using discrete or integrated power stages from 10W to over 500W
- Complete fault protection with automatic recovery
描述
The D2-6 family (D2-71083, D2-74083, D2-71583, D2-74583, and D2-74383) digital audio processor devices are complete System-on Chip (SoC) audio processor and Class-D amplifier controllers. Integrated DSP processing and configurable audio processing algorithms provide an extremely flexible platform for feature rich and cost-effective quality audio solutions which benefit from the addition of Class-D amplifiers and DSP audio processing, meeting demands of consumer electronics applications. The 12 integrated digital PWM controllers can be used in a variety of multi-channel audio system configurations, supporting powered as well as line outputs. Fully protected amplifier control provides efficient and clean Class-D power output support. The D2-6 device family supports full audio decoding for formats including Dolby® Digital, Dolby® Pro Logic IIx, AAC LC™, DTS® Digital Surround, and Dolby® Digital Plus. The D2-6 family is pin-compatible and function/feature compatible with the D2-3 family devices, enabling additional decoding capability to existing designs, or providing cost optimization to lower-featured systems not requiring the additional audio processing and decode capability.
应用
- Audio Video Receiver (AVR)
- Multi-channel surround soundbar
- Home Theater in a Box (HTiB)
- Multi-channel Multi-Media (MM) systems
- Installed steerable audio arrays
- Bluetooth/WiFi voice-enabled speaker systems
- Automotive trunk/amplified solutions
| Part Number | Status | Samples | Stock | Package | Lead Count (#) | Carrier Type | Moisture Sensitivity Level (MSL) | Pb (Lead) Free | Pb Free Category | Temp. Range (°C) |
|---|---|---|---|---|---|---|---|---|---|---|
| D2-71083-LR | Obsolete | N/A | Out of Stock | LQFP | 128# | Tray | 3 | Yes | Pb-Free 100% Matte Tin Plate w/Anneal-e3 | 0 to +70°C |
- 数据手册英语PDF 1.29 MB FN7838 2023年6月02日
- 应用说明英语PDF 184 KB r32an0007eu0100-d2-audio-dsp-output-filter-design 2019年5月20日AI 生成的摘要: The document explains the design and selection of output filters for D2 Audio DSP half-bridge and full-bridge configurations. It details the half-bridge output stage, filter network, and bias network that provides a DC offset and AC ground reference. It covers filter operation principles, emphasizing the second-order LC low-pass filter to attenuate high-frequency PWM signals. Loudspeaker impedance impacts filter damping and response. Recommended component values for inductors, capacitors, and bias networks are provided for various load impedances and power ratings.
- 应用说明英语PDF 147 KB r32an0006eu-d2-audio-eeprom-spi 2019年5月15日AI 生成的摘要: The document explains procedures for writing firmware and parameter data to EEPROM or SPI Flash memories in D2 Audio DSP systems using an external microcontroller. It details booting methods, control pin configurations, and communication protocols for different D2 Audio device families (D2-1, D2-3, D2-4, D2-6). The process involves loading bootloader or boot code hex files, writing settings to memory, and rebooting to run from the updated non-volatile memory. Specific I2C addresses and pin states are critical for successful operations.
- 应用说明英语PDF 155 KB r32an0005eu-d2-3-d2-6-audio-soc 2019年5月15日AI 生成的摘要: The document details the programmable I/O pin assignments and hardware functions for the D2 Audio SOC family. It explains the allocation of dedicated and assignable pins for features like master volume control, headphone detection, mute function, temperature monitoring, power stage protection, and error reporting. Each function's enable/disable options, pin assignments, and operational parameters are configurable via the D2 Audio Customization GUI. The guide emphasizes efficient pin usage and protection mechanisms for audio output stages.
- 应用说明英语PDF 297 KB r32an0002eu-d2-audio-dsp 2019年5月13日AI 生成的摘要: The D2 Audio Customization GUI v3 offers a comprehensive set of audio processing blocks including Excursion Control, Delay, Compressor, Expander, Envelope VCA, Reverb, Chime Generator, RMS Level Meter, Fade-Pan, Mono Mixer, Dither Generator, Harmonics Generator, and Compound Blocks. It supports real-time interactive control with graphical displays for magnitude and phase, enabling precise parameter adjustments. The software allows flexible signal flow editing with dynamic register addressing and integration of third-party virtualization algorithms. Each audio block has dedicated registers, and the system generates updated header files for seamless controller integration.
- 数据手册英语PDF 1.29 MB FN7838 2023年6月02日
推荐文档 (1)
- 数据手册英语PDF 1.29 MB FN7838 2023年6月02日
数据手册 (1)
No Results Found.
确保所有关键词拼写正确。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
如果您使用了筛选器,请考虑取消选择某些筛选器选项以扩大搜索结果。
- 搜索我们丰富的知识库,帮助您解答常见问题
- 前往支持论坛,获取瑞萨电子技术专家和社群的帮助
- 应用说明英语PDF 184 KB r32an0007eu0100-d2-audio-dsp-output-filter-design 2019年5月20日AI 生成的摘要: The document explains the design and selection of output filters for D2 Audio DSP half-bridge and full-bridge configurations. It details the half-bridge output stage, filter network, and bias network that provides a DC offset and AC ground reference. It covers filter operation principles, emphasizing the second-order LC low-pass filter to attenuate high-frequency PWM signals. Loudspeaker impedance impacts filter damping and response. Recommended component values for inductors, capacitors, and bias networks are provided for various load impedances and power ratings.
- 应用说明英语PDF 147 KB r32an0006eu-d2-audio-eeprom-spi 2019年5月15日AI 生成的摘要: The document explains procedures for writing firmware and parameter data to EEPROM or SPI Flash memories in D2 Audio DSP systems using an external microcontroller. It details booting methods, control pin configurations, and communication protocols for different D2 Audio device families (D2-1, D2-3, D2-4, D2-6). The process involves loading bootloader or boot code hex files, writing settings to memory, and rebooting to run from the updated non-volatile memory. Specific I2C addresses and pin states are critical for successful operations.
- 应用说明英语PDF 155 KB r32an0005eu-d2-3-d2-6-audio-soc 2019年5月15日AI 生成的摘要: The document details the programmable I/O pin assignments and hardware functions for the D2 Audio SOC family. It explains the allocation of dedicated and assignable pins for features like master volume control, headphone detection, mute function, temperature monitoring, power stage protection, and error reporting. Each function's enable/disable options, pin assignments, and operational parameters are configurable via the D2 Audio Customization GUI. The guide emphasizes efficient pin usage and protection mechanisms for audio output stages.
- 应用说明英语PDF 297 KB r32an0002eu-d2-audio-dsp 2019年5月13日AI 生成的摘要: The D2 Audio Customization GUI v3 offers a comprehensive set of audio processing blocks including Excursion Control, Delay, Compressor, Expander, Envelope VCA, Reverb, Chime Generator, RMS Level Meter, Fade-Pan, Mono Mixer, Dither Generator, Harmonics Generator, and Compound Blocks. It supports real-time interactive control with graphical displays for magnitude and phase, enabling precise parameter adjustments. The software allows flexible signal flow editing with dynamic register addressing and integration of third-party virtualization algorithms. Each audio block has dedicated registers, and the system generates updated header files for seamless controller integration.
应用说明和白皮书 (4)
No Results Found.
确保所有关键词拼写正确。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
如果您使用了筛选器,请考虑取消选择某些筛选器选项以扩大搜索结果。
- 搜索我们丰富的知识库,帮助您解答常见问题
- 前往支持论坛,获取瑞萨电子技术专家和社群的帮助
No Results Found.
确保所有关键词拼写正确。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
如果您使用了筛选器,请考虑取消选择某些筛选器选项以扩大搜索结果。
- 搜索我们丰富的知识库,帮助您解答常见问题
- 前往支持论坛,获取瑞萨电子技术专家和社群的帮助
No Results Found.
确保所有关键词拼写正确。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
如果您使用了筛选器,请考虑取消选择某些筛选器选项以扩大搜索结果。
- 搜索我们丰富的知识库,帮助您解答常见问题
- 前往支持论坛,获取瑞萨电子技术专家和社群的帮助
No Results Found.
确保所有关键词拼写正确。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
如果您使用了筛选器,请考虑取消选择某些筛选器选项以扩大搜索结果。
- 搜索我们丰富的知识库,帮助您解答常见问题
- 前往支持论坛,获取瑞萨电子技术专家和社群的帮助
No Results Found.
确保所有关键词拼写正确。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
如果您使用了筛选器,请考虑取消选择某些筛选器选项以扩大搜索结果。
- 搜索我们丰富的知识库,帮助您解答常见问题
- 前往支持论坛,获取瑞萨电子技术专家和社群的帮助
No Results Found.
确保所有关键词拼写正确。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
如果您使用了筛选器,请考虑取消选择某些筛选器选项以扩大搜索结果。
- 搜索我们丰富的知识库,帮助您解答常见问题
- 前往支持论坛,获取瑞萨电子技术专家和社群的帮助
No Results Found.
确保所有关键词拼写正确。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
如果您使用了筛选器,请考虑取消选择某些筛选器选项以扩大搜索结果。
- 搜索我们丰富的知识库,帮助您解答常见问题
- 前往支持论坛,获取瑞萨电子技术专家和社群的帮助
No Results Found.
确保所有关键词拼写正确。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
如果您使用了筛选器,请考虑取消选择某些筛选器选项以扩大搜索结果。
- 搜索我们丰富的知识库,帮助您解答常见问题
- 前往支持论坛,获取瑞萨电子技术专家和社群的帮助
No Results Found.
确保所有关键词拼写正确。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
如果您使用了筛选器,请考虑取消选择某些筛选器选项以扩大搜索结果。
- 搜索我们丰富的知识库,帮助您解答常见问题
- 前往支持论坛,获取瑞萨电子技术专家和社群的帮助
No Results Found.
确保所有关键词拼写正确。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
如果您使用了筛选器,请考虑取消选择某些筛选器选项以扩大搜索结果。
- 搜索我们丰富的知识库,帮助您解答常见问题
- 前往支持论坛,获取瑞萨电子技术专家和社群的帮助
筛选
当前筛选条件
软件与工具
按类型筛选
按供应商筛选
样例程序
按应用筛选
按功能筛选
按编译器筛选
按 IDE 筛选
模拟模型
Partner Solutions
No Results Found.
确保所有关键词拼写正确。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
如果您使用了筛选器,请考虑取消选择某些筛选器选项以扩大搜索结果。
- 搜索我们丰富的知识库,帮助您解答常见问题
- 前往支持论坛,获取瑞萨电子技术专家和社群的帮助
软件与工具 (2)
No Results Found.
确保所有关键词拼写正确。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
如果您使用了筛选器,请考虑取消选择某些筛选器选项以扩大搜索结果。
- 搜索我们丰富的知识库,帮助您解答常见问题
- 前往支持论坛,获取瑞萨电子技术专家和社群的帮助
No Results Found.
确保所有关键词拼写正确。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
如果您使用了筛选器,请考虑取消选择某些筛选器选项以扩大搜索结果。
- 搜索我们丰富的知识库,帮助您解答常见问题
- 前往支持论坛,获取瑞萨电子技术专家和社群的帮助
No Results Found.
确保所有关键词拼写正确。
尝试使用更少、不同或更宽泛的词语来改变搜索结果。
如果您使用了筛选器,请考虑取消选择某些筛选器选项以扩大搜索结果。
- 搜索我们丰富的知识库,帮助您解答常见问题
- 前往支持论坛,获取瑞萨电子技术专家和社群的帮助